On 12/04/2014 01:57 AM, Bartosz Golaszewski wrote:
The return value of i2c_smbus_read_byte_data() is checked in
tmp401_init_client(), but only a warning is printed and the device is
registered anyway. This leads to devices being registered even if they
cannot be physically detected.
Bail-out from probe in case of write errors and notify the user.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
drivers/hwmon/tmp401.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index 5a72d7f..75b3210 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -618,8 +618,8 @@ static const struct attribute_group tmp432_group = {
* Begin non sysfs callback code (aka Real code)
*/
-static void tmp401_init_client(struct tmp401_data *data,
- struct i2c_client *client)
+static int tmp401_init_client(struct tmp401_data *data,
+ struct i2c_client *client)
{
int config, config_orig;
@@ -630,8 +630,8 @@ static void tmp401_init_client(struct tmp401_data *data,
/* Start conversions (disable shutdown if necessary) */
config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
if (config < 0) {
- dev_warn(&client->dev, "Initialization failed!\n");
- return;
+ dev_err(&client->dev, "Initialization failed!");
+ return config;
}
config_orig = config;
@@ -639,6 +639,8 @@ static void tmp401_init_client(struct tmp401_data *data,
if (config != config_orig)
i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
No error check and return here ?
Guenter
+
+ return 0;
}
static int tmp401_detect(struct i2c_client *client,
@@ -721,7 +723,7 @@ static int tmp401_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct tmp401_data *data;
- int groups = 0;
+ int groups = 0, status;
data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
if (!data)
@@ -732,7 +734,9 @@ static int tmp401_probe(struct i2c_client *client,
data->kind = id->driver_data;
/* Initialize the TMP401 chip */
- tmp401_init_client(data, client);
+ status = tmp401_init_client(data, client);
+ if (status < 0)
+ return status;
/* Register sysfs hooks */
data->groups[groups++] = &tmp401_group;
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
