On 01/27/2015 02:37 AM, Jean Delvare wrote:
Hi Robert,
Le Tuesday 27 January 2015 à 08:59 +0100, Robert Rosengren a écrit :
On 01/16/2015 07:30 PM, Guenter Roeck wrote:
I sent a couple of patches a minute ago which should take care of the issue.
Would be great if you can test it.
I applied the v2 versions of the patches for a quick test, but it was
not successful. Haven't done any further investigation on what the
problem might be, but when trying to read the sysfs driver I get "read
error: No such device or address".
The sysfs path have moved with the REGMAP settings, from
/sys/bus/i2c/devices/<x>/in0_input to
/sys/bus/i2c/devices/<x>/hwmon/hwmon0/in0_input.
This is expected, shouldn't be an issue if you are using a
libsensors-based application with a recent enough version of libsensors.
Odd though, thinking about it, since the move was done with a separate
patch, not with the regmap patch.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
