LM95233 is similar to LM95234, but it only supports two instead of four external temperature sensors. Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Documentation/hwmon/lm95234 | 15 ++++++--- drivers/hwmon/lm95234.c | 78 ++++++++++++++++++++++++++++++++------------- 2 files changed, 66 insertions(+), 27 deletions(-) diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234 index a0e95dd..32b777e 100644 --- a/Documentation/hwmon/lm95234 +++ b/Documentation/hwmon/lm95234 @@ -2,6 +2,10 @@ Kernel driver lm95234 ===================== Supported chips: + * National Semiconductor / Texas Instruments LM95233 + Addresses scanned: I2C 0x18, 0x2a, 0x2b + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/product/lm95233 * National Semiconductor / Texas Instruments LM95234 Addresses scanned: I2C 0x18, 0x4d, 0x4e Datasheet: Publicly available at the Texas Instruments website @@ -13,11 +17,12 @@ Author: Guenter Roeck <linux@xxxxxxxxxxxx> Description ----------- -LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management -Bus (SMBus) interface and TrueTherm technology that can very accurately monitor -the temperature of four remote diodes as well as its own temperature. -The four remote diodes can be external devices such as microprocessors, -graphics processors or diode-connected 2N3904s. The LM95234's TruTherm +LM95233 and LM95234 are 11-bit digital temperature sensors with a 2-wire +System Management Bus (SMBus) interface and TrueTherm technology +that can very accurately monitor the temperature of two (LM95233) +or four (LM95234) remote diodes as well as its own temperature. +The remote diodes can be external devices such as microprocessors, +graphics processors or diode-connected 2N3904s. The chip's TruTherm beta compensation technology allows sensing of 90 nm or 65 nm process thermal diodes accurately. diff --git a/drivers/hwmon/lm95234.c b/drivers/hwmon/lm95234.c index 411202b..0b3b0f1 100644 --- a/drivers/hwmon/lm95234.c +++ b/drivers/hwmon/lm95234.c @@ -1,7 +1,7 @@ /* * Driver for Texas Instruments / National Semiconductor LM95234 * - * Copyright (c) 2013 Guenter Roeck <linux@xxxxxxxxxxxx> + * Copyright (c) 2013, 2014 Guenter Roeck <linux@xxxxxxxxxxxx> * * Derived from lm95241.c * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@xxxxxxxxx> @@ -30,7 +30,10 @@ #define DRVNAME "lm95234" -static const unsigned short normal_i2c[] = { 0x18, 0x4d, 0x4e, I2C_CLIENT_END }; +enum chips { lm95233, lm95234 }; + +static const unsigned short normal_i2c[] = { + 0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END }; /* LM95234 registers */ #define LM95234_REG_MAN_ID 0xFE @@ -53,11 +56,13 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4d, 0x4e, I2C_CLIENT_END }; #define LM95234_REG_TCRIT_HYST 0x5a #define NATSEMI_MAN_ID 0x01 +#define LM95233_CHIP_ID 0x89 #define LM95234_CHIP_ID 0x79 /* Client data (each client gets its own) */ struct lm95234_data { struct i2c_client *client; + const struct attribute_group *groups[3]; struct mutex update_lock; unsigned long last_updated, interval; /* in jiffies */ bool valid; /* false until following fields are valid */ @@ -564,35 +569,23 @@ static SENSOR_DEVICE_ATTR(temp5_offset, S_IWUSR | S_IRUGO, show_offset, static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, set_interval); -static struct attribute *lm95234_attrs[] = { +static struct attribute *lm95234_common_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, - &sensor_dev_attr_temp4_input.dev_attr.attr, - &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, - &sensor_dev_attr_temp4_fault.dev_attr.attr, - &sensor_dev_attr_temp5_fault.dev_attr.attr, &sensor_dev_attr_temp2_type.dev_attr.attr, &sensor_dev_attr_temp3_type.dev_attr.attr, - &sensor_dev_attr_temp4_type.dev_attr.attr, - &sensor_dev_attr_temp5_type.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, - &sensor_dev_attr_temp4_max.dev_attr.attr, - &sensor_dev_attr_temp5_max.dev_attr.attr, &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, @@ -601,18 +594,43 @@ static struct attribute *lm95234_attrs[] = { &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_offset.dev_attr.attr, + &dev_attr_update_interval.attr, + NULL +}; + +static const struct attribute_group lm95234_common_group = { + .attrs = lm95234_common_attrs, +}; + +static struct attribute *lm95234_attrs[] = { + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp4_type.dev_attr.attr, + &sensor_dev_attr_temp5_type.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp5_max.dev_attr.attr, + &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_offset.dev_attr.attr, - &dev_attr_update_interval.attr, NULL }; -ATTRIBUTE_GROUPS(lm95234); + +static const struct attribute_group lm95234_group = { + .attrs = lm95234_attrs, +}; static int lm95234_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int address = client->addr; int mfg_id, chip_id, val; + const char *name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; @@ -622,8 +640,20 @@ static int lm95234_detect(struct i2c_client *client, return -ENODEV; chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID); - if (chip_id != LM95234_CHIP_ID) + switch (chip_id) { + case LM95233_CHIP_ID: + if (address != 0x18 && address != 0x2a && address != 0x2b) + return -ENODEV; + name = "lm95233"; + break; + case LM95234_CHIP_ID: + if (address != 0x18 && address != 0x4d && address != 0x4e) + return -ENODEV; + name = "lm95234"; + break; + default: return -ENODEV; + } val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS); if (val & 0x30) @@ -645,7 +675,7 @@ static int lm95234_detect(struct i2c_client *client, if (val & 0xe1) return -ENODEV; - strlcpy(info->type, "lm95234", I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; } @@ -698,15 +728,19 @@ static int lm95234_probe(struct i2c_client *client, if (err < 0) return err; + data->groups[0] = &lm95234_common_group; + if (id->driver_data == lm95234) + data->groups[1] = &lm95234_group; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, - lm95234_groups); + data, data->groups); return PTR_ERR_OR_ZERO(hwmon_dev); } /* Driver data (common to all clients) */ static const struct i2c_device_id lm95234_id[] = { - { "lm95234", 0 }, + { "lm95233", lm95233 }, + { "lm95234", lm95234 }, { } }; MODULE_DEVICE_TABLE(i2c, lm95234_id); -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
