[PATCH 1/3] hwmon: (applesmc) Allow format checking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently gcc and other tools can't check the format strings. It's
easy to fix by letting fan_speed_fmt simply hold what is different
between the strings (and renaming it appropriately). While at it, we
can also eliminate some wasted space and an extra level of indirection
by making it an array of char[4] instead of char*.

Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
 drivers/hwmon/applesmc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 0af63da6b603..0c950e1b03f3 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -84,12 +84,12 @@
 #define TEMP_SENSOR_TYPE	"sp78"
 
 /* List of keys used to read/write fan speeds */
-static const char *const fan_speed_fmt[] = {
-	"F%dAc",		/* actual speed */
-	"F%dMn",		/* minimum speed (rw) */
-	"F%dMx",		/* maximum speed */
-	"F%dSf",		/* safe speed - not all models */
-	"F%dTg",		/* target speed (manual: rw) */
+static const char fan_speed_suffix[][4] = {
+	"Ac",		/* actual speed */
+	"Mn",		/* minimum speed (rw) */
+	"Mx",		/* maximum speed */
+	"Sf",		/* safe speed - not all models */
+	"Tg",		/* target speed (manual: rw) */
 };
 
 #define INIT_TIMEOUT_MSECS	5000	/* wait up to 5s for device init ... */
@@ -811,7 +811,7 @@ static ssize_t applesmc_show_fan_speed(struct device *dev,
 	char newkey[5];
 	u8 buffer[2];
 
-	sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
+	sprintf(newkey, "F%d%s", to_index(attr), fan_speed_suffix[to_option(attr)]);
 
 	ret = applesmc_read_key(newkey, buffer, 2);
 	speed = ((buffer[0] << 8 | buffer[1]) >> 2);
@@ -834,7 +834,7 @@ static ssize_t applesmc_store_fan_speed(struct device *dev,
 	if (kstrtoul(sysfsbuf, 10, &speed) < 0 || speed >= 0x4000)
 		return -EINVAL;		/* Bigger than a 14-bit value */
 
-	sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
+	sprintf(newkey, "F%d%s", to_index(attr), fan_speed_suffix[to_option(attr)]);
 
 	buffer[0] = (speed >> 6) & 0xff;
 	buffer[1] = (speed << 2) & 0xff;
-- 
2.1.3


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux