Hello,
Thank for your works.
modeprobe it87 option force_id=0x8728
On a Gigabyte GA-H97M-HD3 with chip IT8620E
Found unknown chip with ID 0x8620
Probing for Super-I/O at 0x4e/0x4f
#########
# BIOS diplay #
#########
CPU Vcore : 1.092V
CPU VRIN : 1.728V
DRAM Voltage : 1.5V
+3.3V : 3.324V
+5V : 5.100V
+12V : 12.096V
CPU VAXG : 0.708V
CPU Temperature : 33 °C
System Temperature : 25 °C
CPU Fan Speed : 1350 RPM
(No System Fan Speed on this computer)
###########
# sensors3.conf #
###########
chip "coretemp-isa-0000"
label temp1 "CPU Temp"
compute temp1 @ * 1.433, @ / 1.433
compute temp2 @ * 1.433, @ / 1.433
compute temp3 @ * 1.433, @ / 1.433
set temp1_max 72
set temp2_max 72
set temp3_max 72
chip "acpitz-virtual-0"
ignore temp1 # stays always at 27.8 degrees C
ignore temp2 # stays always at 29.8 degrees C
chip "it8728-*"
ignore in0 # ???
ignore in4 # ???
label in1 "+3.3V"
set in1_min 3.3 * 0.95 # Some boards including GA-H67MA-UD2H
set in1_max 3.3 * 1.05 # don't have 3.3V voltage reading
#compute in1 1.649*@,@/1.649 # multipliers provided by Martin Malik
author of hwinfo
compute in1 1.648 * @, @ / 1.648
label in2 "+12V"
set in2_min 12 * 0.95
set in2_max 12 * 1.05
#compute in2 @ * (72/12), @ / (72/12) #mg,15.05.13
compute in2 @ * 5.96, @ / 5.96
label in3 "+5V"
set in3_min 5 * 0.95
set in3_max 5 * 1.05
#compute in3 2.5*@,@/2.5
compute in3 2.529 * @, @ / 2.529
label in5 "CPU VRIN"
compute in5 @ * 0.990, @ / 0.990
set in5_min 0.825 * 0.95
set in5_max 1.425 * 1.05
label in6 "VDRAM"
set in6_min 1.5 * 0.95 # adjust these, 1.35 for LVDDR3
set in6_max 1.5 * 1.05 # 1.5V is recommended, 1.65 tops
label in7 "3VSB"
set in7_min 3.14
set in7_max 3.47
label in8 "Vbat"
label fan1 "CPU fan"
set fan1_min 700
compute fan1 1.17 * @, @ / 1.17
ignore fan2
ignore fan3
ignore fan4
ignore fan5
label temp1 "System Temp"
set temp1_min 10
set temp1_max 60 # seen those rising to 55C
ignore temp2 # -128 degrees C
ignore temp3 # Intel PECI
#################
# sensors command result #
#################
acpitz-virtual-0
Adapter: Virtual device
coretemp-isa-0000
Adapter: ISA adapter
CPU Temp: +33.0°C (high = +114.6°C, crit = +143.3°C)
Core 0: +31.5°C (high = +114.6°C, crit = +143.3°C)
Core 1: +28.7°C (high = +114.6°C, crit = +143.3°C)
it8728-isa-0a30
Adapter: ISA adapter
+3.3V: +3.32 V (min = +3.14 V, max = +3.46 V)
+12V: +12.09 V (min = +11.37 V, max = +12.59 V)
+5V: +5.10 V (min = +4.76 V, max = +5.25 V)
CPU VRIN: +1.72 V (min = +0.78 V, max = +1.50 V)
VDRAM: +1.50 V (min = +1.43 V, max = +1.57 V)
3VSB: +3.38 V (min = +3.14 V, max = +3.48 V)
Vbat: +2.90 V
CPU fan: 1349 RPM (min = 722 RPM)
System Temp: +25.0°C (low = +10.0°C, high = +60.0°C) sensor = thermistor
intrusion0: ALARM
Goodbye
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
