Hello,
Thank for your works.
modeprobe it87 option force_id=0x8728
On a Gigabyte GA-H97M-HD3 with chip IT8620E
Found unknown chip with ID 0x8620
Probing for Super-I/O at 0x4e/0x4f
#########
# BIOS diplay #
#########
CPU Vcore : 1.092V
CPU VRIN : 1.728V
DRAM Voltage : 1.5V
+3.3V : 3.324V
+5V : 5.100V
+12V : 12.096V
CPU VAXG : 0.708V
CPU Temperature : 33 °C
System Temperature : 25 °C
CPU Fan Speed : 1350 RPM
(No System Fan Speed on this computer)
#####################
# sensors with no sensors3.conf #
#####################
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +21.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +21.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +20.0°C (high = +80.0°C, crit = +100.0°C)
it8728-isa-0a30
Adapter: ISA adapter
in0: +0.01 V (min = +0.00 V, max = +3.06 V)
in1: +2.02 V (min = +1.91 V, max = +2.10 V)
in2: +2.03 V (min = +1.91 V, max = +2.11 V)
in3: +2.02 V (min = +1.88 V, max = +2.08 V)
in4: +0.01 V (min = +0.00 V, max = +3.06 V)
in5: +1.74 V (min = +1.63 V, max = +1.80 V)
in6: +1.50 V (min = +1.43 V, max = +1.57 V)
3VSB: +3.38 V (min = +3.14 V, max = +3.48 V)
Vbat: +2.90 V
fan1: 1180 RPM (min = 597 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +24.0°C (low = +10.0°C, high = +60.0°C) sensor = thermistor
temp2: -128.0°C (low = +127.0°C, high = +127.0°C) sensor = disabled
temp3: +13.0°C (low = +0.0°C, high = +60.0°C) sensor = Intel PECI
intrusion0: ALARM
############################
# sensors with a sensors3.conf (not perfect)#
############################
acpitz-virtual-0
Adapter: Virtual device
coretemp-isa-0000
Adapter: ISA adapter
CPU Temp: +33.0°C (high = +90.0°C, crit = +110.0°C)
Core 0: +31.0°C (high = +90.0°C, crit = +110.0°C)
Core 1: +32.0°C (high = +90.0°C, crit = +110.0°C)
it8728-isa-0a30
Adapter: ISA adapter
+3.3V: +3.32 V (min = +3.14 V, max = +3.46 V)
+12V: +12.09 V (min = +10.80 V, max = +13.23 V)
+5V: +5.10 V (min = +4.76 V, max = +5.25 V)
CPU VRIN: +1.72 V (min = +1.62 V, max = +1.78 V)
VDRAM: +1.50 V (min = +1.43 V, max = +1.57 V)
3VSB: +3.38 V (min = +3.14 V, max = +3.48 V)
Vbat: +2.90 V
CPU Fan: 1385 RPM (min = 698 RPM)
System Temp: +25.0°C (low = +10.0°C, high = +60.0°C) sensor = thermistor
###################
# sensors3.conf (not perfect)#
###################
chip "coretemp-isa-0000"
# ark.intel.com
# maxi 72 degrees C
label temp1 "CPU Temp"
compute temp1 @ + 10, @ / @ - 10
compute temp2 @ + 10, @ / @ - 10
compute temp3 @ + 10, @ / @ - 10
chip "acpitz-virtual-0"
ignore temp1 # stays always at 27.8 degrees C
ignore temp2 # stays always at 29.8 degrees C
chip "it8728-*"
ignore in0 # 0.01V ???
label in1 "+3.3V"
set in1_min 3.3 * 0.95 # Some boards including GA-H67MA-UD2H
set in1_max 3.3 * 1.05 # don't have 3.3V voltage reading
compute in1 1.648 * @, @ / 1.648
label in2 "+12V"
set in2_min 12 * 0.9
set in2_max 12 * 1.1
compute in2 @ * 5.96, @ / 5.96
label in3 "+5V"
set in3_min 5 * 0.95
set in3_max 5 * 1.05
compute in3 2.529 * @, @ / 2.529
ignore in4 # 0.01V ???
label in5 "CPU VRIN"
compute in5 @ * 0.990, @ / 0.990
set in5_min 1.7 * 0.95
set in5_max 1.7 * 1.05
label in6 "VDRAM"
set in6_min 1.5 * 0.95 # adjust these, 1.35 for LVDDR3
set in6_max 1.5 * 1.05 # 1.5V is recommended, 1.65 tops
label in7 "3VSB"
set in7_min 3.14
set in7_max 3.47
label in8 "Vbat"
# TEMP
label temp1 "System Temp"
set temp1_min 10
set temp1_max 60 # seen those rising to 55C
ignore temp2 # -128 degrees C
ignore temp3 # Intel PECI
# FAN
label fan1 "CPU Fan"
set fan1_min 700
compute fan1 1.17 * @, @ / 1.17
ignore fan2
ignore fan3
ignore fan4
ignore fan5
ignore intrusion0
#################
# dmidecode -t Baseboard #
#################
# dmidecode 2.12
# SMBIOS entry point at 0x000f04c0
SMBIOS 2.7 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: H97M-HD3
Version: x.x
Serial Number: To be filled by O.E.M.
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0022, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x003C, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:19.0
Thank you.
Goodbye.
Cédric
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
