TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest that the upper 8 bit of the device ID reflect the chip ID and the lower 8 bit reflect the version number, modify the code to accept all chips with ID 0x29xx. Also add support for TS3001 and TSE2004. Some of the datasheets for older chips are no longer available from the IDT web site, so replace explicit links in the documentation with a generic note. Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Documentation/hwmon/jc42 | 8 +++----- drivers/hwmon/Kconfig | 2 +- drivers/hwmon/jc42.c | 16 ++++++++++------ 3 files changed, 14 insertions(+), 12 deletions(-) diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index f3893f7..f7f1830a 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -11,12 +11,10 @@ Supported chips: http://www.atmel.com/Images/doc8711.pdf http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf - * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2 + * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2, + TS3001GB2 Datasheets: - http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf - http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf - http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf - http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf + Available from IDT web site * Maxim MAX6604 Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 9ea71ea..c80c8a9 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -624,7 +624,7 @@ config SENSORS_JC42 mobile devices and servers. Support will include, but not be limited to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), - STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. + STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. This driver can also be built as a module. If so, the module will be called jc42. diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 996bdfd..9887d32 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -87,11 +87,14 @@ static const unsigned short normal_i2c[] = { #define AT30TSE004_DEVID_MASK 0xffff /* IDT */ -#define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ -#define TS3000B3_DEVID_MASK 0xffff +#define TSE2004_DEVID 0x2200 +#define TSE2004_DEVID_MASK 0xff00 -#define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */ -#define TS3000GB2_DEVID_MASK 0xffff +#define TS3000_DEVID 0x2900 /* Also matches TSE2002 */ +#define TS3000_DEVID_MASK 0xff00 + +#define TS3001_DEVID 0x3000 +#define TS3001_DEVID_MASK 0xff00 /* Maxim */ #define MAX6604_DEVID 0x3e00 @@ -152,8 +155,9 @@ static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK }, - { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, - { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK }, + { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, + { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK }, + { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK }, { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK }, { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, -- 2.1.0 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
