---------------------------------------- > Subject: RE: Supermicro X7DBU configuration > From: jdelvare@xxxxxxx > To: sean451@xxxxxxxxxxx > CC: linux@xxxxxxxxxxxx; lm-sensors@xxxxxxxxxxxxxx > Date: Wed, 17 Dec 2014 19:25:45 +0100 > > Le Wednesday 17 December 2014 à 13:16 -0500, Sean O'Brien a écrit : >> Loading the module produced the following: >> >> $ sudo i2cdetect -l >> i2c-0 i2c Radeon i2c bit bus DVI_DDC I2C adapter >> i2c-1 i2c Radeon i2c bit bus VGA_DDC I2C adapter >> i2c-2 i2c Radeon i2c bit bus MONID I2C adapter >> i2c-3 i2c Radeon i2c bit bus CRT2_DDC I2C adapter >> i2c-4 smbus SMBus I801 adapter at 1100 SMBus adapter > > And now modprobe w83793 and you should see it in "sensors". > > -- > Jean Delvare > SUSE L3 Support > Voila! w83793-i2c-4-2f Adapter: SMBus I801 adapter at 1100 VcoreA: +1.08 V (min = +0.92 V, max = +1.49 V) VcoreB: +1.08 V (min = +0.92 V, max = +1.49 V) in2: +1.08 V (min = +0.99 V, max = +1.33 V) in3: +0.50 V (min = +0.38 V, max = +0.69 V) in4: +1.49 V (min = +1.34 V, max = +1.98 V) in5: +3.30 V (min = +2.96 V, max = +3.63 V) in6: +0.99 V (min = +0.90 V, max = +1.10 V) +5V: +5.09 V (min = +4.64 V, max = +5.65 V) 5VSB: +5.14 V (min = +4.64 V, max = +5.65 V) Vbat: +3.34 V (min = +2.99 V, max = +3.66 V) fan1: 9183 RPM (min = 712 RPM) fan2: 9375 RPM (min = 712 RPM) fan3: 9246 RPM (min = 712 RPM) fan4: 0 RPM (min = 712 RPM) ALARM fan5: 0 RPM (min = 712 RPM) ALARM fan6: 0 RPM (min = 712 RPM) ALARM fan7: 0 RPM (min = 712 RPM) ALARM fan8: 9782 RPM (min = 712 RPM) fan9: 0 RPM (min = 712 RPM) ALARM fan10: 0 RPM (min = 712 RPM) ALARM temp1: +45.0°C (high = +89.0°C, hyst = +84.0°C) sensor = Intel PECI temp2: +40.0°C (high = +89.0°C, hyst = +84.0°C) sensor = Intel PECI temp3: -128.0°C (high = +89.0°C, hyst = +84.0°C) sensor = Intel PECI temp4: -128.0°C (high = +89.0°C, hyst = +84.0°C) sensor = Intel PECI temp5: +26.0°C (high = +75.0°C, hyst = +70.0°C) sensor = thermistor intrusion0: OK beep_enable: disabled Now to control those noise fans! Thanks so much for the guidance guys! Very much appreciated. Sean. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
