On 12/10/2014 02:38 AM, Bartosz Golaszewski wrote:
Include the rshunt and avg sysfs attributes for ina2xx in the documentation. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- Documentation/hwmon/ina2xx | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index 4223c2d..c100c24 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -44,6 +44,10 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage. The INA230 is a high or low side current shunt and power monitor with an I2C interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. -The shunt value in micro-ohms can be set via platform data or device tree. -Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings -if the device tree is used. +The shunt value in micro-ohms can be set via platform data or device tree in +compile-time or via the shunt_resistor attribute in sysfs in run-time. Please +refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings if +the device tree is used. + +The averaging rate of INA226 and INA230 can be changed via the avg_rate sysfs +attribute. The available rates are: 1, 4, 16, 64, 128, 256, 512 and 1024.
Please merge the documentation updates into the actual patches as appropriate. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
