I've attach a tar.gz, I guess the mailing list doesn't accept attachments.
Thanks for your help. It's really appreciated.
# sensors-detect
# sensors-detect revision 6260 (2014-12-12 15:25:20 +0100)
# System: Supermicro X10SLM-F [0123456789]
# Kernel: 3.16.0-0.bpo.4-amd64 x86_64
# Processor: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz (6/60/3)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): yes
Found `IPMI BMC KCS' at 0xca2... Success!
(confidence 8, driver `to-be-written')
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Lynx Point (PCH)
Next adapter: SMBus I801 adapter at 0580 (i2c-0)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x1b
Handled by driver `jc42' (already loaded), chip type `jc42'
Client found at address 0x48
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `Texas Instruments TMP435'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: AST i2c bit bus (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x37
Probing for `Texas Instruments TMP435'... No
Probing for `Fintek F75111R/RG/N (GPIO)'... No
Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `Texas Instruments TMP435'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `Texas Instruments TMP435'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `jc42':
* Bus `SMBus I801 adapter at 0580'
Busdriver `i2c_i801', I2C address 0x1b
Chip `jc42' (confidence: 6)
Driver `to-be-written':
* ISA bus, address 0xca2
Chip `IPMI BMC KCS' (confidence: 8)
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Note: there is no driver for IPMI BMC KCS yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): yes
Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
for initialization at boot time.
You should now start the lm_sensors service to load the required
kernel modules.
Unloading cpuid... OK
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +29.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +29.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +26.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +27.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +25.0°C (high = +80.0°C, crit = +100.0°C)
# lspci
00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM Controller
[8086:0c08] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB xHCI Host
Controller [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point MEI
Controller #1 [8086:8c3a] (rev 04)
00:16.1 Communication controller [0780]: Intel Corporation Lynx Point MEI
Controller #2 [8086:8c3b] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
I217-LM [8086:153a] (rev 05)
00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced
Host Controller #2 [8086:8c2d] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root
Port #1 [8086:8c10] (rev d5)
00:1c.1 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root
Port #2 [8086:8c12] (rev d5)
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced
Host Controller #1 [8086:8c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC Controller
[8086:8c54] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point 6-port SATA
Controller 1 [AHCI mode] [8086:8c02] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus Controller
[8086:8c22] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation Lynx Point
Thermal Management Controller [8086:8c24] (rev 05)
01:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI
Bridge [1a03:1150] (rev 03)
02:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED
Graphics Family [1a03:2000] (rev 30)
03:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
Connection [8086:1533] (rev 03)
# lsmod
Module Size Used by
i2c_dev 13109 0
fuse 62012 0
ufs 58774 0
qnx4 13184 0
hfsplus 71616 0
hfs 45877 0
minix 27623 0
ntfs 163882 0
vfat 17316 0
msdos 17077 0
fat 45642 2 msdos,vfat
jfs 137196 0
xfs 590943 0
reiserfs 192132 0
ext4 350763 0
crc16 12343 1 ext4
jbd2 62115 1 ext4
ext3 162072 0
jbd 56902 1 ext3
ext2 59231 0
mbcache 13114 3 ext2,ext3,ext4
efivars 17916 0
dm_mod 63645 0
nfsd 216181 2
nfs 308353 0
nfs_acl 12511 2 nfs,nfsd
auth_rpcgss 37143 2 nfs,nfsd
fscache 36739 1 nfs
lockd 67306 2 nfs,nfsd
sunrpc 173730 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
loop 22641 0
acpi_cpufreq 12935 0
mperf 12453 1 acpi_cpufreq
processor 28149 9 acpi_cpufreq
snd_pcm 68083 0
snd_page_alloc 13003 1 snd_pcm
snd_timer 22917 1 snd_pcm
coretemp 12898 0
snd 52893 2 snd_timer,snd_pcm
crc32c_intel 12747 0
ghash_clmulni_intel 13130 0
soundcore 13065 1 snd
aesni_intel 50667 0
i2c_i801 16870 0
aes_x86_64 16843 1 aesni_intel
shpchp 31293 0
iTCO_wdt 17081 0
iTCO_vendor_support 12704 1 iTCO_wdt
video 17683 0
acpi_pad 21212 0
button 12937 0
aes_generic 33026 2 aes_x86_64,aesni_intel
cryptd 14517 2 aesni_intel,ghash_clmulni_intel
evdev 17562 6
joydev 17266 0
pcspkr 12579 0
btrfs 505636 1
crc32c 12656 1
libcrc32c 12426 1 btrfs
zlib_deflate 25638 1 btrfs
hid_apple 12671 0
usbhid 36418 0
hid 81372 2 usbhid,hid_apple
sg 25874 0
sd_mod 36136 2
crc_t10dif 12348 1 sd_mod
xhci_hcd 73413 0
e1000e 133833 0
igb 109311 0
i2c_algo_bit 12841 1 igb
i2c_core 23876 4 i2c_algo_bit,igb,i2c_i801,i2c_dev
ahci 24997 1
dca 13240 1 igb
libahci 22941 1 ahci
libata 140630 2 libahci,ahci
scsi_mod 162321 3 libata,sd_mod,sg
ehci_hcd 40249 0
fan 12674 0
thermal 17383 0
usbcore 128741 4 ehci_hcd,xhci_hcd,usbhid
thermal_sys 18040 4 thermal,fan,video,processor
usb_common 12354 1 usbcore
debian@ranculos:~$ sudo i2detect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- 1b -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- 33 -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- 53 -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
debian@ranculos:~$ sudo i2cdump 0 0x1b
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x1b, mode byte
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 00 00 00 00 c1 00 29 00 00 00 00 00 00 00 00 .....?.)........
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
debian@ranculos:~$ sudo i2cdump 0 0x44
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x44, mode byte
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 00 00 3f 00 00 00 00 00 20 27 02 07 10 01 15 ...?..... '?????
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
debian@ranculos:~$ sudo i2cdump 0 0x53
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x53, mode byte
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 92 10 0b 02 03 19 00 09 0b 52 01 08 0c 00 3c 00 ??????.??R???.<.
10: 69 78 69 30 69 11 20 89 00 05 3c 3c 00 f0 83 05 ixi0i? ?.?<<.???
20: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ?...............
30: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 64 01 ............??d?
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 01 98 04 13 20 cb 20 29 98 4b 2c .....???? ? )?K,
80: 39 39 36 35 35 32 35 2d 30 39 31 2e 41 30 30 4c 9965525-091.A00L
90: 46 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F ..............
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81 ...............?
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 ..............0.
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@xxxxxxxxxxxxxxxx)
(gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u2
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=c772d704-5561-48c5-b324-6e9b3c16b0f0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
[ 0.000000] BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd892000 (usable)
[ 0.000000] BIOS-e820: 00000000cd892000 - 00000000cd899000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cd899000 - 00000000dd818000 (usable)
[ 0.000000] BIOS-e820: 00000000dd818000 - 00000000dd8fc000 (reserved)
[ 0.000000] BIOS-e820: 00000000dd8fc000 - 00000000dd945000 (usable)
[ 0.000000] BIOS-e820: 00000000dd945000 - 00000000dda7b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dda7b000 - 00000000df7ff000 (reserved)
[ 0.000000] BIOS-e820: 00000000df7ff000 - 00000000df800000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Supermicro X10SLM-F/X10SLM-F, BIOS 2.0 04/24/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd6b0] fd6b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df800000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00df800000 page 2M
[ 0.000000] kernel direct mapping tables up to df800000 @
1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @
dd943000-dd945000
[ 0.000000] RAMDISK: 36c4c000 - 3761e000
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 SUPERM)
[ 0.000000] ACPI: XSDT 00000000dda4d0a0 000BC (v01 SUPERM SMCI--MB
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000dda5a5d0 0010C (v05 SUPERM SMCI--MB
01072009 AMI 00010013)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0
version, truncating length 268 to 244 (20110623/tbfadt-288)
[ 0.000000] ACPI: DSDT 00000000dda4d1f0 0D3DB (v02 SUPERM SMCI--MB
00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000dda7af80 00040
[ 0.000000] ACPI: APIC 00000000dda5a6e0 00092 (v03 SUPERM SMCI--MB
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000dda5a778 00044 (v01 SUPERM SMCI--MB
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000dda5a7c0 00BEE (v01 Ther_R Ther_Rvp
00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000dda5b3b0 00540 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dda5b8f0 00B74 (v01 CpuRef CpuSsdt
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dda5c468 002F2 (v01 PmRef Cpu0Tst
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dda5c760 00348 (v01 PmRef ApTst
00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000dda5caa8 0003C (v01 SUPERM SMCI--MB
01072009 MSFT 00000097)
[ 0.000000] ACPI: PRAD 00000000dda5cae8 000CE (v02 PRADID PRADTID
00000001 MSFT 03000001)
[ 0.000000] ACPI: HPET 00000000dda5cbb8 00038 (v01 SUPERM SMCI--MB
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000dda5cbf0 00397 (v01 SataRe SataTabl
00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000dda5cf88 05B5E (v01 SaSsdt SaSsdt
00003000 INTL 20120711)
[ 0.000000] ACPI: SPMI 00000000dda62ae8 00040 (v05 A M I OEMSPMI
00000000 AMI. 00000000)
[ 0.000000] ACPI: DMAR 00000000dda62b28 00080 (v01 INTEL BDW
00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 00000000dda62ba8 00130 (v01 AMI AMI EINJ
00000000 00000000)
[ 0.000000] ACPI: ERST 00000000dda62cd8 00230 (v01 AMIER AMI ERST
00000000 00000000)
[ 0.000000] ACPI: HEST 00000000dda62f08 000A8 (v01 AMI AMI HEST
00000000 00000000)
[ 0.000000] ACPI: BERT 00000000dda62fb0 00030 (v01 AMI AMI BERT
00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD ->
[ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000099
[ 0.000000] 0: 0x00000100 -> 0x000cd892
[ 0.000000] 0: 0x000cd899 -> 0x000dd818
[ 0.000000] 0: 0x000dd8fc -> 0x000dd945
[ 0.000000] 0: 0x000df7ff -> 0x000df800
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1038308
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3916 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 888979 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000099000 -
000000000009a000
[ 0.000000] PM: Registered nosave memory: 000000000009a000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cd892000 -
00000000cd899000
[ 0.000000] PM: Registered nosave memory: 00000000dd818000 -
00000000dd8fc000
[ 0.000000] PM: Registered nosave memory: 00000000dd945000 -
00000000dda7b000
[ 0.000000] PM: Registered nosave memory: 00000000dda7b000 -
00000000df7ff000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 -
00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at df800000 (gap:
df800000:18800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s78848 r8192
d23552 u262144
[ 0.000000] pcpu-alloc: s78848 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1022175
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=c772d704-5561-48c5-b324-6e9b3c16b0f0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4008340k/4718592k available (3432k kernel code,
565360k absent, 144892k reserved, 3306k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3299.545 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6599.09 BogoMIPS (lpj=13198180)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000031] AppArmor: AppArmor disabled by boot time parameter
[ 0.000188] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.001110] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.001533] Mount-cache hash table entries: 256
[ 0.001600] Initializing cgroup subsys cpuacct
[ 0.001602] Initializing cgroup subsys memory
[ 0.001608] Initializing cgroup subsys devices
[ 0.001610] Initializing cgroup subsys freezer
[ 0.001611] Initializing cgroup subsys net_cls
[ 0.001612] Initializing cgroup subsys blkio
[ 0.001616] Initializing cgroup subsys perf_event
[ 0.001635] CPU: Physical Processor ID: 0
[ 0.001636] CPU: Processor Core ID: 0
[ 0.001640] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001640] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.002386] mce: CPU supports 9 MCE banks
[ 0.002397] CPU0: Thermal monitoring enabled (TM1)
[ 0.002404] using mwait in idle threads.
[ 0.002647] ACPI: Core revision 20110623
[ 0.010626] DMAR: Host address width 39
[ 0.010627] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.010632] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462
ecap f010da
[ 0.010633] DMAR: RMRR base: 0x000000df697000 end: 0x000000df6a5fff
[ 0.010703] IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
[ 0.010704] HPET id 0 under DRHD base 0xfed90000
[ 0.010705] ------------[ cut here ]------------
[ 0.010710] WARNING: at
/build/linux-pTuYXd/linux-3.2.63/drivers/iommu/intr_remapping.c:558
enable_intr_remapping+0x71/0x266()
[ 0.010711] Hardware name: X10SLM-F
[ 0.010712] Your BIOS is broken and requested that x2apic be disabled
[ 0.010713] This will leave your machine vulnerable to irq-injection
attacks
[ 0.010713] Use 'intremap=no_x2apic_optout' to override BIOS request
[ 0.010714] Modules linked in:
[ 0.010716] Pid: 1, comm: swapper/0 Not tainted 3.2.0-4-amd64 #1 Debian
3.2.63-2+deb7u2
[ 0.010717] Call Trace:
[ 0.010722] [<ffffffff81046d61>] ? warn_slowpath_common+0x78/0x8c
[ 0.010724] [<ffffffff81046e0d>] ? warn_slowpath_fmt+0x45/0x4a
[ 0.010726] [<ffffffff816dfd68>] ? enable_intr_remapping+0x71/0x266
[ 0.010728] [<ffffffff816b7e2f>] ? enable_IR_x2apic+0x7a/0x1d3
[ 0.010732] [<ffffffff81350a07>] ? _raw_spin_unlock_irqrestore+0xe/0xf
[ 0.010733] [<ffffffff816b9b0c>] ? default_setup_apic_routing+0xd/0x71
[ 0.010736] [<ffffffff816b60eb>] ? native_smp_prepare_cpus+0x2dc/0x2f4
[ 0.010739] [<ffffffff816aabc5>] ? kernel_init+0x7f/0x157
[ 0.010741] [<ffffffff81357b74>] ? kernel_thread_helper+0x4/0x10
[ 0.010743] [<ffffffff816aab46>] ? start_kernel+0x3c8/0x3c8
[ 0.010744] [<ffffffff81357b70>] ? gs_change+0x13/0x13
[ 0.010749] ---[ end trace 30192ee56e7d07ea ]---
[ 0.010855] Enabled IRQ remapping in xapic mode
[ 0.010863] x2apic not enabled, IRQ remapping is in xapic mode
[ 0.011266] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050905] CPU0: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz stepping 03
[ 0.156877] Performance Events: no PEBS fmt2+, generic architected
perfmon, Intel PMU driver.
[ 0.156881] ... version: 3
[ 0.156882] ... bit width: 48
[ 0.156882] ... generic registers: 4
[ 0.156883] ... value mask: 0000ffffffffffff
[ 0.156884] ... max period: 000000007fffffff
[ 0.156885] ... fixed-purpose events: 3
[ 0.156886] ... event mask: 000000070000000f
[ 0.157008] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.157071] Booting Node 0, Processors #1
[ 0.157072] smpboot cpu 1: start_ip = 94000
[ 0.265668] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.265730] #2
[ 0.265731] smpboot cpu 2: start_ip = 94000
[ 0.373498] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.373562] #3
[ 0.373563] smpboot cpu 3: start_ip = 94000
[ 0.481431] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.481493] #4
[ 0.481494] smpboot cpu 4: start_ip = 94000
[ 0.589296] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.589367] #5
[ 0.589368] smpboot cpu 5: start_ip = 94000
[ 0.697143] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.697207] #6
[ 0.697207] smpboot cpu 6: start_ip = 94000
[ 0.805079] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.805141] #7 Ok.
[ 0.805141] smpboot cpu 7: start_ip = 94000
[ 0.913015] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.913034] Brought up 8 CPUs
[ 0.913035] Total of 8 processors activated (52797.54 BogoMIPS).
[ 0.919984] devtmpfs: initialized
[ 0.921614] PM: Registering ACPI NVS region at cd892000 (28672 bytes)
[ 0.921616] PM: Registering ACPI NVS region at dd945000 (1269760 bytes)
[ 0.921719] print_constraints: dummy:
[ 0.921757] NET: Registered protocol family 16
[ 0.921812] ACPI: bus type pci registered
[ 0.921855] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.921857] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.923658] PCI: Using configuration type 1 for base access
[ 0.924161] bio: create slab <bio-0> at 0
[ 0.924220] ACPI: Added _OSI(Module Device)
[ 0.924221] ACPI: Added _OSI(Processor Device)
[ 0.924222] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.924223] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.925565] ACPI: EC: Look up EC in DSDT
[ 0.927134] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.983366] ACPI: Dynamic OEM Table Load:
[ 0.983368] ACPI: PRAD (null) 000CE (v02 PRADID PRADTID
00000001 MSFT 03000001)
[ 1.012113] ACPI: SSDT 00000000dd8aac18 003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 1.012452] ACPI: Dynamic OEM Table Load:
[ 1.012453] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 1.024189] ACPI: SSDT 00000000dd8aa618 005AA (v01 PmRef ApIst
00003000 INTL 20051117)
[ 1.024584] ACPI: Dynamic OEM Table Load:
[ 1.024585] ACPI: SSDT (null) 005AA (v01 PmRef ApIst
00003000 INTL 20051117)
[ 1.036074] ACPI: SSDT 00000000dd8a9d98 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 1.036410] ACPI: Dynamic OEM Table Load:
[ 1.036412] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 1.048902] ACPI: Interpreter enabled
[ 1.048905] ACPI: (supports S0 S4 S5)
[ 1.048927] ACPI: Using IOAPIC for interrupt routing
[ 1.049209] ACPI: Power Resource [PG00] (on)
[ 1.060180] ACPI: Power Resource [PG01] (on)
[ 1.072161] ACPI: Power Resource [PG02] (on)
[ 1.088102] ACPI: Power Resource [FN00] (off)
[ 1.088151] ACPI: Power Resource [FN01] (off)
[ 1.088198] ACPI: Power Resource [FN02] (off)
[ 1.088244] ACPI: Power Resource [FN03] (off)
[ 1.088292] ACPI: Power Resource [FN04] (off)
[ 1.088826] ACPI: No dock devices found.
[ 1.088845] HEST: Table parsing has been initialized.
[ 1.088847] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 1.089063] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.089366] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.089368] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.089369] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 1.089370] pci_root PNP0A08:00: host bridge window [mem
0x000cc000-0x000cffff]
[ 1.089371] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d3fff]
[ 1.089373] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 1.089374] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 1.089375] pci_root PNP0A08:00: host bridge window [mem
0x000dc000-0x000dffff]
[ 1.089376] pci_root PNP0A08:00: host bridge window [mem
0x000e0000-0x000e3fff]
[ 1.089377] pci_root PNP0A08:00: host bridge window [mem
0x000e4000-0x000e7fff]
[ 1.089378] pci_root PNP0A08:00: host bridge window [mem
0xe0000000-0xfeafffff]
[ 1.089387] pci 0000:00:00.0: [8086:0c08] type 0 class 0x000600
[ 1.089440] pci 0000:00:14.0: [8086:8c31] type 0 class 0x000c03
[ 1.089456] pci 0000:00:14.0: reg 10: [mem 0xf7220000-0xf722ffff 64bit]
[ 1.089509] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.089527] pci 0000:00:16.0: [8086:8c3a] type 0 class 0x000780
[ 1.089544] pci 0000:00:16.0: reg 10: [mem 0xf7238000-0xf723800f 64bit]
[ 1.089600] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.089617] pci 0000:00:16.1: [8086:8c3b] type 0 class 0x000780
[ 1.089634] pci 0000:00:16.1: reg 10: [mem 0xf7237000-0xf723700f 64bit]
[ 1.089689] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 1.089714] pci 0000:00:19.0: [8086:153a] type 0 class 0x000200
[ 1.089728] pci 0000:00:19.0: reg 10: [mem 0xf7200000-0xf721ffff]
[ 1.089735] pci 0000:00:19.0: reg 14: [mem 0xf7235000-0xf7235fff]
[ 1.089743] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
[ 1.089794] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.089816] pci 0000:00:1a.0: [8086:8c2d] type 0 class 0x000c03
[ 1.089834] pci 0000:00:1a.0: reg 10: [mem 0xf7234000-0xf72343ff]
[ 1.089913] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.089934] pci 0000:00:1c.0: [8086:8c10] type 1 class 0x000604
[ 1.089991] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.090011] pci 0000:00:1c.1: [8086:8c12] type 1 class 0x000604
[ 1.090067] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.090095] pci 0000:00:1d.0: [8086:8c26] type 0 class 0x000c03
[ 1.090113] pci 0000:00:1d.0: reg 10: [mem 0xf7233000-0xf72333ff]
[ 1.090192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.090214] pci 0000:00:1f.0: [8086:8c54] type 0 class 0x000601
[ 1.090320] pci 0000:00:1f.2: [8086:8c02] type 0 class 0x000106
[ 1.090333] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 1.090340] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 1.090347] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 1.090353] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 1.090360] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf01f]
[ 1.090366] pci 0000:00:1f.2: reg 24: [mem 0xf7232000-0xf72327ff]
[ 1.090398] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.090412] pci 0000:00:1f.3: [8086:8c22] type 0 class 0x000c05
[ 1.090425] pci 0000:00:1f.3: reg 10: [mem 0xf7231000-0xf72310ff 64bit]
[ 1.090442] pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f]
[ 1.090472] pci 0000:00:1f.6: [8086:8c24] type 0 class 0x001180
[ 1.090489] pci 0000:00:1f.6: reg 10: [mem 0xf7230000-0xf7230fff 64bit]
[ 1.090600] pci 0000:01:00.0: [1a03:1150] type 1 class 0x000604
[ 1.090709] pci 0000:01:00.0: supports D1 D2
[ 1.090710] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.090734] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 1.090743] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[ 1.090746] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 1.090749] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.090832] pci 0000:02:00.0: [1a03:2000] type 0 class 0x000300
[ 1.090858] pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 1.090871] pci 0000:02:00.0: reg 14: [mem 0xf7000000-0xf701ffff]
[ 1.090884] pci 0000:02:00.0: reg 18: [io 0xe000-0xe07f]
[ 1.090983] pci 0000:02:00.0: supports D1 D2
[ 1.090984] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.091049] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 1.091056] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 1.091060] pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.091146] pci 0000:03:00.0: [8086:1533] type 0 class 0x000200
[ 1.091168] pci 0000:03:00.0: reg 10: [mem 0xf7100000-0xf717ffff]
[ 1.091200] pci 0000:03:00.0: reg 18: [io 0xd000-0xd01f]
[ 1.091217] pci 0000:03:00.0: reg 1c: [mem 0xf7180000-0xf7183fff]
[ 1.091356] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.095963] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.095966] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 1.095970] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff]
[ 1.095983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.096068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.096087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.096184] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.096414] pci0000:00: ACPI _OSC control (0x1d) granted
[ 1.099639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 10 *11 12 14 15)
[ 1.099678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *10 11 12 14 15)
[ 1.099718] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 10 *11 12 14 15)
[ 1.099758] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *10 11 12 14 15)
[ 1.099796] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10 *11 12 14 15)
[ 1.099835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 10 11 12 14 15)
*0, disabled.
[ 1.099874] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 10 11 12 14 15)
*0, disabled.
[ 1.099908] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 1.099986] vgaarb: device added:
PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.099988] vgaarb: loaded
[ 1.099988] vgaarb: bridge control possible 0000:02:00.0
[ 1.100009] PCI: Using ACPI for IRQ routing
[ 1.101247] PCI: pci_cache_line_size set to 64 bytes
[ 1.101334] reserve RAM buffer: 0000000000099c00 - 000000000009ffff
[ 1.101335] reserve RAM buffer: 00000000cd892000 - 00000000cfffffff
[ 1.101336] reserve RAM buffer: 00000000dd818000 - 00000000dfffffff
[ 1.101338] reserve RAM buffer: 00000000dd945000 - 00000000dfffffff
[ 1.101339] reserve RAM buffer: 00000000df800000 - 00000000dfffffff
[ 1.101404] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.101408] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.103420] Switching to clocksource hpet
[ 1.104505] pnp: PnP ACPI init
[ 1.104511] ACPI: bus type pnp registered
[ 1.104671] pnp 00:00: [bus 00-3e]
[ 1.104673] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.104674] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.104675] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.104676] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.104678] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.104679] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.104680] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.104681] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.104682] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.104684] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.104685] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.104686] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.104687] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.104688] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.104689] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.104690] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.104691] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.104692] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 1.104694] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.104695] pnp 00:00: [mem 0x00000000 window]
[ 1.104728] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 1.104769] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.104799] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.104800] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.104807] pnp 00:02: [io 0x0000-0x001f]
[ 1.104808] pnp 00:02: [io 0x0081-0x0091]
[ 1.104809] pnp 00:02: [io 0x0093-0x009f]
[ 1.104810] pnp 00:02: [io 0x00c0-0x00df]
[ 1.104811] pnp 00:02: [dma 4]
[ 1.104827] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.104831] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.104846] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.104915] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.104931] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.104946] pnp 00:05: [io 0x00f0]
[ 1.104957] pnp 00:05: [irq 13]
[ 1.104974] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.104990] pnp 00:06: [io 0x0800-0x087f]
[ 1.105012] system 00:06: [io 0x0800-0x087f] has been reserved
[ 1.105014] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.105019] pnp 00:07: [io 0x0070-0x0077]
[ 1.105023] pnp 00:07: [irq 8]
[ 1.105039] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.105051] pnp 00:08: [io 0x1854-0x1857]
[ 1.105073] system 00:08: [io 0x1854-0x1857] has been reserved
[ 1.105075] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 1.105111] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 1.105112] pnp 00:09: [io 0x0a00-0x0a1f]
[ 1.105136] system 00:09: [io 0x0a00-0x0a1f] has been reserved
[ 1.105138] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.105297] pnp 00:0a: [io 0x03f8-0x03ff]
[ 1.105307] pnp 00:0a: [irq 4]
[ 1.105308] pnp 00:0a: [dma 0 disabled]
[ 1.105345] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.105508] pnp 00:0b: [io 0x02f8-0x02ff]
[ 1.105513] pnp 00:0b: [irq 3]
[ 1.105514] pnp 00:0b: [dma 0 disabled]
[ 1.105549] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.105562] pnp 00:0c: [io 0x0010-0x001f]
[ 1.105563] pnp 00:0c: [io 0x0022-0x003f]
[ 1.105564] pnp 00:0c: [io 0x0044-0x005f]
[ 1.105565] pnp 00:0c: [io 0x0062-0x0063]
[ 1.105566] pnp 00:0c: [io 0x0065-0x006f]
[ 1.105567] pnp 00:0c: [io 0x0072-0x007f]
[ 1.105568] pnp 00:0c: [io 0x0080]
[ 1.105569] pnp 00:0c: [io 0x0084-0x0086]
[ 1.105570] pnp 00:0c: [io 0x0088]
[ 1.105571] pnp 00:0c: [io 0x008c-0x008e]
[ 1.105572] pnp 00:0c: [io 0x0090-0x009f]
[ 1.105573] pnp 00:0c: [io 0x00a2-0x00bf]
[ 1.105574] pnp 00:0c: [io 0x00e0-0x00ef]
[ 1.105575] pnp 00:0c: [io 0x04d0-0x04d1]
[ 1.105603] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 1.105604] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.105662] pnp 00:0d: [io 0x0ca2]
[ 1.105663] pnp 00:0d: [io 0x0ca3]
[ 1.105680] pnp 00:0d: Plug and Play ACPI device, IDs IPI0001 (active)
[ 1.105917] pnp 00:0e: [mem 0xfed1c000-0xfed1ffff]
[ 1.105918] pnp 00:0e: [mem 0xfed10000-0xfed17fff]
[ 1.105919] pnp 00:0e: [mem 0xfed18000-0xfed18fff]
[ 1.105920] pnp 00:0e: [mem 0xfed19000-0xfed19fff]
[ 1.105921] pnp 00:0e: [mem 0xf8000000-0xfbffffff]
[ 1.105922] pnp 00:0e: [mem 0xfed20000-0xfed3ffff]
[ 1.105923] pnp 00:0e: [mem 0xfed90000-0xfed93fff]
[ 1.105924] pnp 00:0e: [mem 0xfed45000-0xfed8ffff]
[ 1.105925] pnp 00:0e: [mem 0xff000000-0xffffffff]
[ 1.105926] pnp 00:0e: [mem 0xfee00000-0xfeefffff]
[ 1.105928] pnp 00:0e: [mem 0xf7fe0000-0xf7feffff]
[ 1.105964] system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.105966] system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.105967] system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.105968] system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.105970] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.105971] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.105972] system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.105974] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.105975] system 00:0e: [mem 0xff000000-0xffffffff] has been reserved
[ 1.105977] system 00:0e: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 1.105978] system 00:0e: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.105980] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.106136] pnp: PnP ACPI: found 15 devices
[ 1.106137] ACPI: ACPI bus type pnp unregistered
[ 1.112270] PCI: max bus depth: 2 pci_try_num: 3
[ 1.112300] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 1.112303] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 1.112309] pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.112320] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[ 1.112322] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 1.112326] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.112332] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.112335] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 1.112339] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff]
[ 1.112362] pci 0000:00:1c.0: setting latency timer to 64
[ 1.112373] pci 0000:01:00.0: setting latency timer to 64
[ 1.112383] pci 0000:00:1c.1: setting latency timer to 64
[ 1.112385] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.112386] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.112388] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.112389] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
[ 1.112390] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
[ 1.112391] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
[ 1.112392] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
[ 1.112393] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
[ 1.112394] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
[ 1.112395] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff]
[ 1.112396] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xfeafffff]
[ 1.112397] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.112399] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.112400] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 1.112401] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.112402] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.112403] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 1.112479] NET: Registered protocol family 2
[ 1.113810] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 1.114293] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 1.115813] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.116015] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.116016] TCP reno registered
[ 1.116021] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.116038] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.116136] NET: Registered protocol family 1
[ 1.116511] pci 0000:00:14.0: power state changed by ACPI to D0
[ 1.116524] pci 0000:00:14.0: power state changed by ACPI to D0
[ 1.155383] pci 0000:02:00.0: Boot video device
[ 1.155399] PCI: CLS 64 bytes, default 64
[ 1.155425] Unpacking initramfs...
[ 1.287946] Freeing initrd memory: 10056k freed
[ 1.288732] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.288734] Placing 64MB software IO TLB between ffff8800d9818000 -
ffff8800dd818000
[ 1.288735] software IO TLB at phys 0xd9818000 - 0xdd818000
[ 1.289277] audit: initializing netlink socket (disabled)
[ 1.289285] type=2000 audit(1420854353.028:1): initialized
[ 1.298685] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.299164] VFS: Disk quotas dquot_6.5.2
[ 1.299198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.299252] msgmni has been set to 7848
[ 1.299369] alg: No test for stdrng (krng)
[ 1.299397] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.299399] io scheduler noop registered
[ 1.299400] io scheduler deadline registered
[ 1.299424] io scheduler cfq registered (default)
[ 1.299482] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.299523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.299582] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.299611] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.299685] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
interrupt
[ 1.299687] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.299688] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.299697] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.299708] pcieport 0000:00:1c.1: Signaling PME through PCIe PME
interrupt
[ 1.299709] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.299717] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 1.299727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.299738] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.299739] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.300004] intel_idle: does not run on family 6 model 60
[ 1.300087] ERST: Error Record Serialization Table (ERST) support is
initialized.
[ 1.300198] GHES: APEI firmware first mode is enabled by APEI bit and
WHEA _OSC.
[ 1.300239] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.320826] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.403700] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.511769] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.532430] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.532685] Linux agpgart interface v0.103
[ 1.532764] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.665388] i8042: No controller found
[ 2.665485] Refined TSC clocksource calibration: 3299.992 MHz.
[ 2.665487] Switching to clocksource tsc
[ 2.665542] mousedev: PS/2 mouse device common for all mice
[ 2.665568] rtc_cmos 00:07: RTC can wake from S4
[ 2.665651] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.665679] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.665685] cpuidle: using governor ladder
[ 2.665686] cpuidle: using governor menu
[ 2.665786] TCP cubic registered
[ 2.665819] NET: Registered protocol family 10
[ 2.666070] Mobile IPv6
[ 2.666071] NET: Registered protocol family 17
[ 2.666074] Registering the dns_resolver key type
[ 2.666136] PM: Hibernation image not present or could not be loaded.
[ 2.666141] registered taskstats version 1
[ 2.666583] rtc_cmos 00:07: setting system clock to 2015-01-10 01:45:54
UTC (1420854354)
[ 2.666617] Initializing network drop monitor service
[ 2.667265] Freeing unused kernel memory: 576k freed
[ 2.667316] Write protecting the kernel read-only data: 6144k
[ 2.668688] Freeing unused kernel memory: 648k freed
[ 2.670176] Freeing unused kernel memory: 688k freed
[ 2.676197] udevd[78]: starting version 175
[ 2.684978] usbcore: registered new interface driver usbfs
[ 2.685007] usbcore: registered new interface driver hub
[ 2.685368] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.685370] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.685547] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.685549] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.686211] usbcore: registered new device driver usb
[ 2.686527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.686585] ACPI: Fan [FAN0] (off)
[ 2.686593] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.686597] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.686621] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 2.686632] ACPI: Fan [FAN1] (off)
[ 2.686658] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.686672] ACPI: Fan [FAN2] (off)
[ 2.686706] ACPI: Fan [FAN3] (off)
[ 2.686739] ACPI: Fan [FAN4] (off)
[ 2.690007] SCSI subsystem initialized
[ 2.690551] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.690662] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7234000
[ 2.692946] libata version 3.00 loaded.
[ 2.693379] dca service started, version 1.12.1
[ 2.694594] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.0.5-k
[ 2.694597] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 2.694691] igb 0000:03:00.0: setting latency timer to 64
[ 2.695944] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.695946] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.696301] igb 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2.696308] igb 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.696313] igb 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.696319] igb 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.696324] igb 0000:03:00.0: irq 47 for MSI/MSI-X
[ 2.705826] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.705842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.705843] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.705844] usb usb1: Product: EHCI Host Controller
[ 2.705845] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.705846] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.705912] hub 1-0:1.0: USB hub found
[ 2.705915] hub 1-0:1.0: 2 ports detected
[ 2.705987] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.705989] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.705995] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 2.706018] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.709913] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.709928] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7233000
[ 2.725839] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.725851] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.725852] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.725854] usb usb2: Product: EHCI Host Controller
[ 2.725855] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 2.725856] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.725927] hub 2-0:1.0: USB hub found
[ 2.725929] hub 2-0:1.0: 2 ports detected
[ 2.725984] ahci 0000:00:1f.2: version 3.0
[ 2.726068] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[ 2.726219] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x3f impl SATA mode
[ 2.726221] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ems apst
[ 2.726225] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.732191] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 2.732193] igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1)
0c:c4:7a:40:c1:3a
[ 2.732258] igb 0000:03:00.0: eth0: PBA No: 011000-000
[ 2.732259] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4
tx queue(s)
[ 2.766042] scsi0 : ahci
[ 2.766100] scsi1 : ahci
[ 2.766131] scsi2 : ahci
[ 2.766162] scsi3 : ahci
[ 2.766192] scsi4 : ahci
[ 2.766222] scsi5 : ahci
[ 2.766509] ata1: SATA max UDMA/133 abar m2048@0xf7232000 port
0xf7232100 irq 48
[ 2.766512] ata2: SATA max UDMA/133 abar m2048@0xf7232000 port
0xf7232180 irq 48
[ 2.766514] ata3: SATA max UDMA/133 abar m2048@0xf7232000 port
0xf7232200 irq 48
[ 2.766517] ata4: SATA max UDMA/133 abar m2048@0xf7232000 port
0xf7232280 irq 48
[ 2.766519] ata5: SATA max UDMA/133 abar m2048@0xf7232000 port
0xf7232300 irq 48
[ 2.766521] ata6: SATA max UDMA/133 abar m2048@0xf7232000 port
0xf7232380 irq 48
[ 2.766563] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.766604] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 2.766630] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 2.940674] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1)
0c:c4:7a:40:c1:3b
[ 2.940676] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network
Connection
[ 2.940724] e1000e 0000:00:19.0: eth1: MAC: 11, PHY: 12, PBA No:
0100FF-0FF
[ 2.940742] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 2.940750] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 2.940773] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.940776] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.940781] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 3
[ 2.940866] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.940904] xhci_hcd 0000:00:14.0: irq 50 for MSI/MSI-X
[ 2.940943] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.940944] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.940945] usb usb3: Product: xHCI Host Controller
[ 2.940946] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 2.940947] usb usb3: SerialNumber: 0000:00:14.0
[ 2.940990] xHCI xhci_add_endpoint called for root hub
[ 2.940991] xHCI xhci_check_bandwidth called for root hub
[ 2.941007] hub 3-0:1.0: USB hub found
[ 2.941025] hub 3-0:1.0: 12 ports detected
[ 2.941079] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.941082] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 4
[ 2.941101] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.941102] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.941104] usb usb4: Product: xHCI Host Controller
[ 2.941104] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 2.941105] usb usb4: SerialNumber: 0000:00:14.0
[ 2.941140] xHCI xhci_add_endpoint called for root hub
[ 2.941141] xHCI xhci_check_bandwidth called for root hub
[ 2.941154] hub 4-0:1.0: USB hub found
[ 2.941169] hub 4-0:1.0: 6 ports detected
[ 3.017521] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.085458] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.085473] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.085490] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.085504] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.085518] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.085533] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.086147] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 3.086149] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 3.086151] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 3.086648] ata1.00: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133
[ 3.086650] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 3.087268] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 3.087270] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 3.087271] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 3.087798] ata1.00: configured for UDMA/133
[ 3.087869] scsi 0:0:0:0: Direct-Access ATA WDC WD40EZRX-00S
80.0 PQ: 0 ANSI: 5
[ 3.090077] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00
TB/3.63 TiB)
[ 3.090080] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.090105] sd 0:0:0:0: [sda] Write Protect is off
[ 3.090107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.090118] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.149756] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.149758] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.149900] hub 1-1:1.0: USB hub found
[ 3.150000] hub 1-1:1.0: 6 ports detected
[ 3.169352] sda: sda1 sda2
[ 3.169469] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.170201] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.261283] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.393513] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 3.393515] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.393663] hub 2-1:1.0: USB hub found
[ 3.393761] hub 2-1:1.0: 6 ports detected
[ 3.560989] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 3.581126] usb 3-3: New USB device found, idVendor=0000, idProduct=0001
[ 3.581127] usb 3-3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.581393] hub 3-3:1.0: USB hub found
[ 3.581460] hub 3-3:1.0: 4 ports detected
[ 3.692854] usb 3-6: new high-speed USB device number 3 using xhci_hcd
[ 3.717139] usb 3-6: New USB device found, idVendor=05ac, idProduct=1006
[ 3.717141] usb 3-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.717142] usb 3-6: Product: Keyboard Hub
[ 3.717143] usb 3-6: Manufacturer: Apple, Inc.
[ 3.717144] usb 3-6: SerialNumber: 000000000000
[ 3.717427] hub 3-6:1.0: USB hub found
[ 3.717491] hub 3-6:1.0: 3 ports detected
[ 3.872712] usb 3-3.1: new low-speed USB device number 4 using xhci_hcd
[ 3.896581] usb 3-3.1: New USB device found, idVendor=0557,
idProduct=2419
[ 3.896583] usb 3-3.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.896620] usb 3-3.1: ep 0x81 - rounding interval to 64 microframes, ep
desc says 80 microframes
[ 3.896622] usb 3-3.1: ep 0x82 - rounding interval to 32 microframes, ep
desc says 40 microframes
[ 3.898738] input: HID 0557:2419 as
/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input0
[ 3.898763] generic-usb 0003:0557:2419.0001: input,hidraw0: USB HID
v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-3.1/input0
[ 3.901316] input: HID 0557:2419 as
/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/input/input1
[ 3.901348] generic-usb 0003:0557:2419.0002: input,hidraw1: USB HID
v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-3.1/input1
[ 3.901356] usbcore: registered new interface driver usbhid
[ 3.901356] usbhid: USB HID core driver
[ 3.988575] usb 3-6.2: new low-speed USB device number 5 using xhci_hcd
[ 4.011528] usb 3-6.2: New USB device found, idVendor=05ac,
idProduct=0220
[ 4.011529] usb 3-6.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.011530] usb 3-6.2: Product: Apple Keyboard
[ 4.011531] usb 3-6.2: Manufacturer: Apple, Inc
[ 4.011569] usb 3-6.2: ep 0x81 - rounding interval to 64 microframes, ep
desc says 80 microframes
[ 4.011571] usb 3-6.2: ep 0x82 - rounding interval to 64 microframes, ep
desc says 80 microframes
[ 4.016618] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.0/input/input2
[ 4.016646] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11
Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input0
[ 4.019777] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.1/input/input3
[ 4.019796] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11
Device [Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input1
[ 4.041992] Btrfs loaded
[ 4.090694] device fsid c772d704-5561-48c5-b324-6e9b3c16b0f0 devid 1
transid 4102 /dev/sda2
[ 4.091996] device fsid c772d704-5561-48c5-b324-6e9b3c16b0f0 devid 1
transid 4102 /dev/disk/by-uuid/c772d704-5561-48c5-b324-6e9b3c16b0f0
[ 4.092119] btrfs: disk space caching is enabled
[ 5.706279] udevd[418]: starting version 175
[ 5.822422] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.886452] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 5.886473] ACPI: Sleep Button [SLPB]
[ 5.886501] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 5.886522] ACPI: Power Button [PWRB]
[ 5.886548] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.886563] ACPI: Power Button [PWRF]
[ 5.899840] iTCO_vendor_support: vendor-support=0
[ 5.900334] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.900408] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by
hardware/BIOS
[ 5.902780] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.013379] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.068586] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.083881] ACPI: Requesting acpi_cpufreq
[ 6.085814] Monitor-Mwait will be used to enter C-1 state
[ 6.085821] Monitor-Mwait will be used to enter C-2 state
[ 6.085827] ACPI: acpi_idle registered with cpuidle
[ 6.476090] device fsid c772d704-5561-48c5-b324-6e9b3c16b0f0 devid 1
transid 4102 /dev/sda2
[ 7.266178] btrfs: disk space caching is enabled
[ 7.345664] btrfs: disk space caching is enabled
[ 7.415235] loop: module loaded
[ 8.395690] RPC: Registered named UNIX socket transport module.
[ 8.395692] RPC: Registered udp transport module.
[ 8.395693] RPC: Registered tcp transport module.
[ 8.395694] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.409368] FS-Cache: Loaded
[ 8.512853] FS-Cache: Netfs 'nfs' registered for caching
[ 8.524279] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 9.356836] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.234676] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX/TX
[ 11.235778] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.755201] eth0: no IPv6 routers present
[ 532.235337] device-mapper: uevent: version 1.0.3
[ 532.235384] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@xxxxxxxxxx
[ 533.956075] EFI Variables Facility v0.08 2004-May-17
[ 534.081868] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 534.082054] SGI XFS Quota Management subsystem
[ 534.084360] JFS: nTxBlock = 8192, nTxLock = 65536
[ 534.101671] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 534.108530] QNX4 filesystem 0.2.3 registered.
[ 534.112065] fuse init (API version 7.17)
[ 721.255256] i2c /dev entries driver
[ 1037.908674] i2c /dev entries driver
[ 1882.390983] i2c /dev entries driver
[ 2006.712778] i2c /dev entries driver
--
Patrik Dufresne
On Sat, Jan 10, 2015 at 8:06 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> On 01/09/2015 06:47 PM, Patrik Dufresne wrote:
>
>> Hello,
>>
>> I'm not particularly familiar with lm-sensors or i2c-tools. I'm trying to
>> hack it so my sensors on motherboard "X10SLM-F" is working. It has a SMBus
>> but sensors-detect doesn't find anything on it. According to the
>> documentation, it should be attached to the PSU. I've played a bit with
>> the
>> i2c-tools without a clue to interpret it.
>>
>> As recommanded, see attachment for sensors-detect, sensors, lspci -nn,
>> lsmod, i2cdetect and dmesg.
>>
>> I don't see anything.
>
> Guenter
>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
