Linux USB Users

• Thread Index

• Re: [PATCH 3/5] usb/isp1760: Clean up urb enqueueing
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• Re: How to handle USB_ENDPOINT_XFER_BULK in gadget API?
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: How to handle USB_ENDPOINT_XFER_BULK in gadget API?
  • From: baseplast <baseplast@xxxxxxx>
• [PATCH] usbnet: add support for some Huawei modems with cdc-ether ports
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• RE: State of g_ether/RNDIS?
  • From: "Marc St-Jean" <Marc.St-Jean@xxxxxxxxxx>
• Re: [PATCH 2/5] usb/isp1760: Remove false error printout
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• Re: [PATCH 1/5] usb/isp1760: Report correct urb status after unlink
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• Re: [PATCH 4/6 v3] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• [PATCH 3/3] usb: Configure octeon2 glue logic for proper uSOF cycle period.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] usb: octeon2-common.c: Configure ports for proper electrical characteristics.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] USB: octeon2-common: Don't reinitialize the clocks.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] USB: Fix Octeon2 timing and electrical characteristics
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ARM unaligned MMIO access with attribute((packed))
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ARM unaligned MMIO access with attribute((packed))
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb/isp1760: Remove unneeded OR map and HcBufferStatus code
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCHv2] echi: remove structure packing from ehci_def
  • From: Rabin Vincent <rabin@xxxxxx>
• Re: [PATCH 3/6 v3] xHCI: Set link state support
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] echi: remove structure packing from ehci_def
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• [PATCH] echi: remove structure packing from ehci_def
  • From: Rabin Vincent <rabin@xxxxxx>
• Re: ARM unaligned MMIO access with attribute((packed))
  • From: Rabin Vincent <rabin@xxxxxx>
• [PATCH] usb: musb: omap2430: Fix retention idle on musb peripheral only boards
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 3/6 v3] xHCI: Set link state support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Dmitry Artamonow <mad_soft@xxxxxxxx>
• [PATCH 4/6 v3] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 3/6 v3] xHCI: Set link state support
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 5/6 v3] usbcore: Refine USB3.0 device suspend and resume
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/6 v3] xHCI: warm reset support
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 6/6 v3] usbcore: warm reset USB3 port in SS.Inactive state
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/6 v3] xHCI: Clear link state change support
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 0/6 v3] USB3 hub support refine
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 3/5] usb/isp1760: Clean up urb enqueueing
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 2/5] usb/isp1760: Remove false error printout
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] usb/isp1760: Report correct urb status after unlink
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci: tegra: fix USB1 port reset issue
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 2/6 v2] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Jano <jano.ita@xxxxxxxxx>
• Re: Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: Valdis.Kletnieks@xxxxxx
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [RFC 0/4] xHCI updates for 1.0 spec compliance
  • From: Greg KH <greg@xxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• [RFC 4/4] xhci 1.0: Set transfer burst last packet count field.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 3/4] xhci 1.0: Set transfer burst count field.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 2/4] xhci 1.0: Update TD size field format.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 1/4] xhci 1.0: Only interrupt on short packet for IN EPs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 0/4] xHCI updates for 1.0 spec compliance
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/5] usb/isp1760: Improve urb queueing, get rid of BUG():s in normal code paths
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• [PATCH 4/5] usb/isp1760: Remove unneeded OR map and HcBufferStatus code
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• [PATCH 3/5] usb/isp1760: Clean up urb enqueueing
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• [PATCH 2/5] usb/isp1760: Remove false error printout
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• [PATCH 1/5] usb/isp1760: Report correct urb status after unlink
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• [PATCH 0/5] usb/isp1760: remove BUG() calls etc
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: Valdis.Kletnieks@xxxxxx
• Re: Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to handle USB_ENDPOINT_XFER_BULK in gadget API?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ARM unaligned MMIO access with attribute((packed))
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCHv7] usbnet: Resubmit interrupt URB if device is open
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• [PATCH] USB: gadget: g_multi: fixed vendor and product ID in inf files
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: State of g_ether/RNDIS?
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
• State of g_ether/RNDIS?
  • From: "Marc St-Jean" <Marc.St-Jean@xxxxxxxxxx>
• Wonkiness with keyboard adapter - not sure if it's in USB or input systems
  • From: Valdis.Kletnieks@xxxxxx
• How to handle USB_ENDPOINT_XFER_BULK in gadget API?
  • From: baseplast <baseplast@xxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: ARM unaligned MMIO access with attribute((packed))
  • From: Rabin Vincent <rabin@xxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 2/6 v2] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/6 v2] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] usb: merge the two dummy_hcds into one
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• RE: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] usb: merge the two dummy_hcds into one
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• RE: [Regression?] Removed regulator support in ehci-omap
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/6 v2] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 2/6] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] xhci-hcd: Include <linux/slab.h> in xhci-pci.c
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Thomas Lindroth <thomas.lindroth@xxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Roland Dreier <roland@xxxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci-hcd: Include <linux/slab.h> in xhci-pci.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5 v2] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv5] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci-hcd: Include <linux/slab.h> in xhci-pci.c
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci-hcd: Include <linux/slab.h> in xhci-pci.c
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Questions about USB core reset behavior
  • From: Greg KH <greg@xxxxxxxxx>
• Questions about USB core reset behavior
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• RE: [Regression?] Removed regulator support in ehci-omap
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH] xhci-hcd: Include <linux/slab.h> in xhci-pci.c
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [PATCH 2/6] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• UASP (UAS) for Linux: Updates
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• RE: [PATCH 4/5 v2] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCH] cdc_ncm: fix short packet issue on some devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] cdc_ncm: fix short packet issue on some devices
  • From: Greg KH <greg@xxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Greg KH <greg@xxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Greg KH <greg@xxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Marius Kotsbak <marius.kotsbak@xxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• RE: [Regression?] Removed regulator support in ehci-omap
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCHv5] usbnet: Resubmit interrupt URB once if halted
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Greg KH <greg@xxxxxxxxx>
• Re: PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• resend: error in hiddev_read when interrupted
  • From: Peter Waechtler <pwaechtler@xxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Thomas Lindroth <thomas.lindroth@xxxxxxxxx>
• Re: PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Greg KH <greg@xxxxxxxxx>
• Re: PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Thomas Lindroth <thomas.lindroth@xxxxxxxxx>
• PROBLEM: Mouse connected to USB-3 stopped working 2.6.38->39 regression
  • From: Thomas Lindroth <thomas.lindroth@xxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Matthias Benesch <twoofseven@xxxxxxxxxx>
• Re: [PATCH 4/5 v2] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: CDC NCM missing Zero Length Packets
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: [PATCH 4/5 v2] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCHv6] usbnet: Resubmit interrupt URB if device is open
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCHv6] usbnet: Resubmit interrupt URB if device is open
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCHv6] usbnet: Resubmit interrupt URB if device is open
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv5] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv5] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCHv5] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• CDC NCM missing Zero Length Packets
  • From: Matthias Benesch <twoofseven@xxxxxxxxxx>
• Re: 2.6.39-rc3: usb-storage hotplug kref corruption/ list corruption
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] EHCI : introduce a common ehci_setup
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] EHCI : introduce a common ehci_setup
  • From: matthieu castet <castet.matthieu@xxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 2.6.38.3 w/nut: libusb_get_string: error sending control message: Broken pipe
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/ch9: use proper endianess for wBytesPerInterval
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: How to reset the USB CDC device through an application or from command prompt?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH] omap:usb: add regulator support for EHCI
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH] mfd: Fix usbhs_enable error handling
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: How to reset the USB CDC device through an application or from command prompt?
  • From: Ramya Desai <ramya.desai@xxxxxxxxx>
• Re: problem with USB mass storage when the device interface >= 3
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB HUB issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/ch9: use proper endianess for wBytesPerInterval
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Allow function drivers to defer setup responses
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Allow function drivers to defer setup responses
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• [PATCH 3/6] USB: s3c-hsotg: Fix control request processing
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 2/6] USB: s3c-hsotg: Fix interrupt cleaning code
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 1/6] USB: s3c-hsotg: Fix core reset
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 5/6] USB: s3c-hsotg: Fix hang up after reset
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 6/6] USB: s3c-hsotg: Add copyright string
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 4/6] USB: s3c-hsotg: Fix stall condition processing
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 6/6] usb: renesas_usbhs: add error reason for usbhs_pipe_malloc
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 5/6] usb: renesas_usbhs: remove callback when module removed.
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 3/6] usb: renesas_usbhs: modify spinlock method
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 4/6] usb: renesas_usbhs: return error if wrong recip request
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 2/6] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 1/6] usb: renesas_usbhs: modify fifo clear timing
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 0/6] usb: renesas_usbhs: fixup/modify patches
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: problem with USB mass storage when the device interface >= 3
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• [PATCHv4] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• [PATCHv3] usbnet: Resubmit interrupt URB once if halted
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCHv2] USB: URB: Return -EALREADY for urbs in flight
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH] USB: URB: Return -EALREADY for urbs in flight
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCHv2] USB: URB: Return -EALREADY for urbs in flight
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCH] USB: URB: Return -EALREADY for urbs in flight
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: Driver for r5u870 USB webcams
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH] USB: URB: Return -EALREADY for urbs in flight
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Driver for r5u870 USB webcams
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Driver for r5u870 USB webcams
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Driver for r5u870 USB webcams
  • From: Jon Mason <jdmason@xxxxxxxx>
• [PATCH] USB: URB: Return -EALREADY for urbs in flight
  • From: Paul Stewart <pstew@xxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Support controllers with big endian capability regs
  • From: Jan Andersson <jan@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Support controllers with big endian capability regs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] USB: EHCI: Support controllers with big endian capability regs
  • From: Jan Andersson <jan@xxxxxxxxxxx>
• [PATCH 2/2] USB: EHCI: Add bus glue for GRLIB GRUSBHC controller
  • From: Jan Andersson <jan@xxxxxxxxxxx>
• [PATCH 0/2] USB: EHCI: Add support for GRLIB GRUSBHC EHCI HC
  • From: Jan Andersson <jan@xxxxxxxxxxx>
• Re: problem with USB mass storage when the device interface >= 3
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: problem with USB mass storage when the device interface >= 3
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• Re: problem with USB mass storage when the device interface >= 3
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• problem with USB mass storage when the device interface >= 3
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• RE: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH 10/43] USB: musb: blackfin: work around anomaly 05000450
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH 10/43] USB: musb: blackfin: work around anomaly 05000450
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 0/2] usb: gadget: Make mass_storage pass USBCV MSC Compliance tests
  • From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
• Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• [PATCH] drivers/hid/usbhid/hiddev.c error in hiddev_read when interrupted
  • From: Peter Wächtler <pwaechtler@xxxxxxx>
• Re: [PATCH V2] xHCI: Clear PLC in xhci_bus_resume()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: f_mass_storage: Make us pass USBCV MSC Compliance tests
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Allow function drivers to defer setup responses
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Allow function drivers to defer setup responses
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to reset the USB CDC device?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to reset the USB CDC device?
  • From: Ramya Desai <ramya.desai@xxxxxxxxx>
• [PATCH 2/2] usb: gadget: f_mass_storage: Make us pass USBCV MSC Compliance tests
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• [PATCH 1/2] usb: gadget: composite: Allow function drivers to defer setup responses
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• [PATCH 0/2] usb: gadget: Make mass_storage pass USBCV MSC Compliance tests
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: How to reset the USB CDC device?
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: How to reset the USB CDC device?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How to reset the USB CDC device?
  • From: Ramya Desai <ramya.desai@xxxxxxxxx>
• Re: How to reset the USB CDC device?
  • From: Oliver Neukum <oneukum@xxxxxxx>
• How to reset the USB CDC device?
  • From: Ramya Desai <ramya.desai@xxxxxxxxx>
• RE: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH V2] xHCI: Clear PLC in xhci_bus_resume()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: the problem with general serail gadget driver when re-connect usb cable
  • From: Greg KH <greg@xxxxxxxxx>
• Re: the problem with general serail gadget driver when re-connect usb cable
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• RE: [PATCH] xHCI: Clear PLC in xhci_bus_resume()
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH 6/6] USB: extend ehci-fsl and fsl_udc_core driver for OTG operation
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 5/6] USB: add Freescale USB OTG Transceiver driver
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 4/6] USB: fsl_udc_core: support device mode of MPC5121E DR USB Controller
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 3/6] USB: fsl_udc_core: prepare for SoCs with BE registers and descriptors
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 2/6] USB: fix build of FSL MPH DR OF platform driver
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 1/6] USB: ehci-fsl: add MPC5121E specific suspend and resume
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 0/6] add USB Device and OTG support for MPC5121E SoC
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: USB Disconnects / resets after commit b963801164618e25fbdc0cd452ce49c3628b46c8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB Disconnects / resets after commit b963801164618e25fbdc0cd452ce49c3628b46c8
  • From: Matej Kenda <matejken@xxxxxxxxx>
• Re: kdump regression related to usb3 hub update
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Wanlong Gao <wanlong.gao@xxxxxxxxx>
• Re: USB Disconnects / resets after commit b963801164618e25fbdc0cd452ce49c3628b46c8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USBCV MSC test failing
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: USBCV MSC test failing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Resume freezes laptop with Nova-TD Stick dvb-t tuner
  • From: Zdenek Kabelac <zdenek.kabelac@xxxxxxxxx>
• Re: Endless print of uhci_result_common: failed with status 440000
  • From: Zdenek Kabelac <zdenek.kabelac@xxxxxxxxx>
• USB Disconnects / resets after commit b963801164618e25fbdc0cd452ce49c3628b46c8
  • From: Matej Kenda <matejken@xxxxxxxxx>
• Re: [PATCH] Fixed gpio polarity of gpio USB-phy reset.
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] gpio-vbus: ask for vbus_draw regulator before registering xceiv
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: USBCV MSC test failing
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Thiago Farina <tfransosi@xxxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Wanlong Gao <wanlong.gao@xxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: Driver is depend on SuperH
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/net/usb/usbnet.c: Use FIELD_SIZEOF macro in usbnet_init() function.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH 1/1] drivers/net/usb/usbnet.c: Use FIELD_SIZEOF macro in usbnet_init() function.
  • From: Thiago Farina <tfransosi@xxxxxxxxx>
• [PATCH 1/1] drivers/usb/image/mdc800.c: Remove "typdef enum".
  • From: Thiago Farina <tfransosi@xxxxxxxxx>
• [PATCH] USB: ehci: tegra: fix USB1 port reset issue
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: Re: USB HUB issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: USB HUB issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• [PATCH 1/1] moto_modem: Add USB identifier for the Motorola VE240.
  • From: Elizabeth Jennifer Myers <elizabeth@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• RE: [PATCH/RESEND v6 2/6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• RE: [RFC/PATCH v6 1/5] usb: Add streams support to the gadget framework
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• RE: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• Re: USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• Re: USB HUB issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Greg KH <greg@xxxxxxxxx>
• USB HUB issue
  • From: Marcel <korgull@xxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: "Hans-J. Ullrich" <hans.ullrich@xxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 11/43] usb: fix ips1760-hcd printk format warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 16/43] usb: gadget: eem: fix echo command processing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 14/43] usb: r8a66597-udc: fix spinlock usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 10/43] USB: musb: blackfin: work around anomaly 05000450
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 19/43] USB: ftdi_sio: add PID for OCT DK201 docking station
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 22/43] USB host: Fix lockdep warning in AMD PLL quirk
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 20/43] USB: ohci-au1xxx: fix warning "__BIG_ENDIAN" is not defined
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 23/43] usb: pch_udc: unlock on allocation failure
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 21/43] usb/gadget: don't leak hs_descriptors
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 28/43] usb: qcserial add missing errorpath kfrees
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 26/43] usb: Fix qcserial memory leak on rmmod
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 33/43] USB: xhci: unsigned char never equals -1
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 36/43] USB: xhci - fix math in xhci_get_endpoint_interval()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 35/43] USB: xhci: simplify logic of skipping missed isoc TDs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 39/43] USB: Fix unplug of device with active streams
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 41/43] xhci: Tell USB core both roothubs lost power.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 43/43] Revert "USB: isp1760-hcd: move imask clear after pending work is done"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 42/43] xHCI: Implement AMD PLL quirk
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 40/43] usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 37/43] xhci: Fix NULL pointer deref in handle_port_status()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 38/43] USB: xhci - also free streams when resetting devices
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 34/43] USB: xhci - remove excessive 'inline' markings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 32/43] USB: xhci - fix unsafe macro definitions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 31/43] USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 30/43] USB: isp1760-hcd: move imask clear after pending work is done
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 29/43] USB: fsl_qe_udc: send ZLP when zero flag and length % maxpacket == 0
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 27/43] usb: qcserial avoid pointing to freed memory
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 25/43] USB: ftdi_sio: add ids for Hameg HO720 and HO730
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 24/43] USB: option: Added support for Samsung GT-B3730/GT-B3710 LTE USB modem.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 18/43] usb: musb: omap2430: fix build failure
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 17/43] USB: EHCI: unlink unused QHs when the controller is stopped
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 13/43] usb: Fix Kconfig unmet dependencies for Microblaze EHCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 15/43] USB: ftdi_sio: Added IDs for CTI USB Serial Devices
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 12/43] USB: usb-gadget: unlock data->lock mutex on error path in ep_read()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 09/43] usb: musb: Fix the crash issue during reboot
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 08/43] usb: musb: gadget: check the correct list_head
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 06/43] USB: musb: dereferencing an iomem pointer
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 05/43] USB: musb: silence printk format warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 04/43] USB: musb: using 0 instead of NULL
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 03/43] USB: musb: add missing unlock in cppi_interrupt()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 02/43] usb: musb: ux500: copy dma mask from platform device to musb device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 01/43] usb: musb: clear AUTOSET while clearing DMAENAB
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB fixes for .39
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: "Hans-J. Ullrich" <hans.ullrich@xxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: "Hans-J. Ullrich" <hans.ullrich@xxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: Driver is depend on SuperH
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: "Hans-J. Ullrich" <hans.ullrich@xxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Marius Kotsbak <marius.kotsbak@xxxxxxxxx>
• Re: USBCV MSC test failing
  • From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: [PATCH v3] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v3] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: USB driver for finger print reader
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] xHCI: Clear PLC in xhci_bus_resume()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Richard Ash <richardashaudacity@xxxxxxxxxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Richard Ash <richardashaudacity@xxxxxxxxxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Marius Kotsbak <marius.kotsbak@xxxxxxxxx>
• USB driver for finger print reader
  • From: Devang S <devang221129@xxxxxxxxx>
• [PATCH] usb: factor out state_string() on otg drivers
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Optimising cdc-acm throughput (problems interpreting usbmon output)
  • From: Richard Ash <richardashaudacity@xxxxxxxxxxxxxx>
• Re: [PATCH] Fixed gpio polarity of gpio USB-phy reset.
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH] xHCI: Clear PLC in xhci_bus_resume()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH] usb: renesas_usbhs: Driver is depend on SuperH
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: Bug#622649: linux-image-2.6.38-2-amd64: unable to enumerate USB device on port 6
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v6 1/5] usb: Add streams support to the gadget framework
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: the problem with general serail gadget driver when re-connect usb cable
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• Re: [PATCH/RESEND v6 2/6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Elly Jones <ellyjones@xxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Elly Jones <ellyjones@xxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Elly Jones <ellyjones@xxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Elly Jones <ellyjones@xxxxxxxxxx>
• Re: patch "usb: usb_storage: do not align length of request for CBW to maxp size" added to usb tree
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Elly Jones <ellyjones@xxxxxxxxxx>
• Re: the problem with general serail gadget driver when re-connect usb cable
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb 3.0 not working
  • From: Sergey Galanov <sergey.e.galanov@xxxxxxxxx>
• Re: 2.6.39-rc3: usb-storage hotplug kref corruption/ list corruption
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: hcd: allow wakeups while suspended for Moorestown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 2.6.39-rc3: usb-storage hotplug kref corruption/ list corruption
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: merge the two dummy_hcds into one
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC/PATCH v6 1/5] usb: Add streams support to the gadget framework
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: patch "usb: usb_storage: do not align length of request for CBW to maxp size" added to usb tree
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: hcd: allow wakeups while suspended for Moorestown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Tell USB core both roothubs lost power.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCHv3] usb: core: Change usb_create_sysfs_intf_files()' return type to void
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: merge the two dummy_hcds into one
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb/hcd: don't return 0 on error in usb_add_hcd()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Pull request: More xHCI bug fix patches for 2.6.39
  • From: Greg KH <greg@xxxxxxxxx>
• Re: patch "usb: usb_storage: do not align length of request for CBW to maxp size" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH| Added several new devices to ldusb
  • From: Greg KH <gregkh@xxxxxxx>
• Re: usb 3.0 not working
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: UAS gadget driver & UAS host driver [UPD]
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH ver. 2] USB: add queued-unlinks test case to usbtest driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Tell USB core both roothubs lost power.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/2 v2] usb/usbtest: fix test10 on superpseed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/usbtest: fix test10 on superpseed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb/usbtest: print super on super speed
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] usb/usbtest: fix test10 on superpseed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] USB: Mark ehci_adjust_port_wakeup_flags as __maybe_unused
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• [PATCH 1/2] usb/usbtest: print super on super speed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC/PATCH v1 5/5] uas: HS-UAS mode implementation
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH/RESEND v1 4/5] uas: TASK MANAGEMENT IU implementation
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH v3 3/5] uas: COMMAND IU implementation
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH v3 2/5] uas: MS UAS Gadget driver - Infrastructure
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH v6 1/5] usb: Add streams support to the gadget framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH v3 0/5] UAS Gadget Driver
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH 6/6] usb:gadget: Introduce usb_generate_ss_descriptors()
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v6 5/6] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v6 4/6] usb: Modify existing gadget drivers to use config_ep_by_speed() instead of ep_choose.
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v5 3/6] usb: Configure endpoint according to gadget speed.
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v6 2/6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v8 1/6] usb: Adding SuperSpeed support to dummy_hcd
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v7 0/6] usb gadget: Add SuperSpeed support to the Gadget Framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH] USB: ohci-s3c2410: use __devinit and __devexit macros for probe and remove
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH] USB: ohci-s3c2410: use resource_size()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH] usb: merge the two dummy_hcds into one
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] Fixed gpio polarity of gpio USB-phy reset.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: musb: omap2430: fix build failure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] Fixed gpio polarity of gpio USB-phy reset.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: storage_common: use kstrto*()
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [40/52] kstrtox: convert drivers/usb/
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: storage_common: use kstrto*()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] usb: gadget: storage_common: use kstrto*() [bug fix]
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• RE: Question about USB keyboard remote wakeup from hibernation
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH 2/2] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] usb/hcd: don't return 0 on error in usb_add_hcd()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] Add Qualcomm Gobi 2000/3000 driver.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] xhci: Tell USB core both roothubs lost power.
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH 4/4] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v4 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 1/4] ARM: S3C2416: Add USB Phy register definitions
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH RESEND v2 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] Fixed gpio polarity of gpio USB-phy reset.
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: resetep problem though hub
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• RE: [PATCH 5/5 v5] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH] Fixed gpio polarity of gpio USB-phy reset.
  • From: Juergen Kilb <J.Kilb@xxxxxxxxx>
• the problem with general serail gadget driver when re-connect usb cable
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• Re: 2.6.38: rt2800usb: high latency (1000ms)?
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• Re: 2.6.38: rt2800usb: high latency (1000ms)?
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• [PATCH v2] usb: renesas_usbhs: fixup cast warning
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: EXYNOS4: Add usb ehci device to the NURI board
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: fixup cast warning
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH] usb: renesas_usbhs: fixup cast warning
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCHv2] usb: gadget: storage_common: use kstrto*()
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Pull request: More xHCI bug fix patches for 2.6.39
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] USB: OHCI: Fix build warning on Alchemy
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCHv2] usb: gadget: storage_common: use kstrto*()
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] USB: OHCI: Fix build warning on Alchemy
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 11/11] xHCI: Implement AMD PLL quirk
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 08/11] USB: Fix unplug of device with active streams
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 05/11] USB: xhci - fix math in xhci_get_endpoint_interval()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 03/11] USB: xhci - remove excessive 'inline' markings
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 09/11] usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 10/11] xhci: Tell USB core both roothubs lost power.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 07/11] USB: xhci - also free streams when resetting devices
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 06/11] xhci: Fix NULL pointer deref in handle_port_status()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 04/11] USB: xhci: simplify logic of skipping missed isoc TDs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 02/11] USB: xhci: unsigned char never equals -1
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 01/11] USB: xhci - fix unsafe macro definitions
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Pull request: More xHCI bug fix patches for 2.6.39
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hcd: allow wakeups while suspended for Moorestown
  • From: Kristen Carlson Accardi <kristen@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: EXYNOS4: Add usb ehci device to the NURI board
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: xhci - fix comparison when checking for duplicate ports
  • From: Dmitry Torokhov <dtor@xxxxxxxxxx>
• Re: [PATCH] twl4030-usb: Report correct vbus value for accessory charger adapters1
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: OHCI: Fix build warning on Alchemy
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] USB: xhci - fix comparison when checking for duplicate ports
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v3 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv3] usb: core: Change usb_create_sysfs_intf_files()' return type to void
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: OHCI: Fix build warning on Alchemy
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: add queued-unlinks test case to usbtest driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2 v2] usb: renesas_usbhs: Add Renesas USBHS common code
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: option: ZTE MF626 does respond to DTS/RTS setting, blacklist it
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] xhci: Tell USB core both roothubs lost power.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: storage_common: use kstrto*()
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: musb: omap2430: fix build failure
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: Mark ehci_adjust_port_wakeup_flags as __maybe_unused
  • From: Greg KH <greg@xxxxxxxxx>