[PATCH 17/43] USB: EHCI: unlink unused QHs when the controller is stopped

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

This patch (as1458) fixes a problem affecting ultra-reliable systems:
When hardware failover of an EHCI controller occurs, the data
structures do not get released correctly.  This is because the routine
responsible for removing unused QHs from the async schedule assumes
the controller is running properly (the frame counter is used in
determining how long the QH has been idle) -- but when a failover
causes the controller to be electronically disconnected from the PCI
bus, obviously it stops running.

The solution is simple: Allow scan_async() to remove a QH from the
async schedule if it has been idle for long enough _or_ if the
controller is stopped.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Reported-and-Tested-by: Dan Duval <dan.duval@xxxxxxxxxxx>
CC: <stable@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/usb/host/ehci-q.c |   15 +++++++++------
 1 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 98ded66..42abd0f 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1247,24 +1247,27 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 static void scan_async (struct ehci_hcd *ehci)
 {
+	bool			stopped;
 	struct ehci_qh		*qh;
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
 rescan:
+	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
 	qh = ehci->async->qh_next.qh;
 	if (likely (qh != NULL)) {
 		do {
 			/* clean any finished work for this qh */
-			if (!list_empty (&qh->qtd_list)
-					&& qh->stamp != ehci->stamp) {
+			if (!list_empty(&qh->qtd_list) && (stopped ||
+					qh->stamp != ehci->stamp)) {
 				int temp;
 
 				/* unlinks could happen here; completion
 				 * reporting drops the lock.  rescan using
 				 * the latest schedule, but don't rescan
-				 * qhs we already finished (no looping).
+				 * qhs we already finished (no looping)
+				 * unless the controller is stopped.
 				 */
 				qh = qh_get (qh);
 				qh->stamp = ehci->stamp;
@@ -1285,9 +1288,9 @@ rescan:
 			 */
 			if (list_empty(&qh->qtd_list)
 					&& qh->qh_state == QH_STATE_LINKED) {
-				if (!ehci->reclaim
-					&& ((ehci->stamp - qh->stamp) & 0x1fff)
-						>= (EHCI_SHRINK_FRAMES * 8))
+				if (!ehci->reclaim && (stopped ||
+					((ehci->stamp - qh->stamp) & 0x1fff)
+						>= EHCI_SHRINK_FRAMES * 8))
 					start_unlink_async(ehci, qh);
 				else
 					action = TIMER_ASYNC_SHRINK;
-- 
1.7.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux