Because pipe buffer allocation is very picky and difficult,
current renesas_usbhs driver is not caring pipe re-allocation.
In this situation, driver will create new pipe without caring old pipe
if "usbhsg_ep_enable" is called after "usbhsg_ep_disable" on current driver.
This mean the limited pipe and buffer will be used as waste.
But it is possible to re-use same buffer to same pipe.
By this patch, driver will initialize pipe when it detected new connection or
new gadget, and doesn't try re-allocation for same pipe in above case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
drivers/usb/renesas_usbhs/mod_gadget.c | 18 +++++++++++++++---
1 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 9a5ac02..7cb30e4 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -787,12 +787,18 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
usbhsg_queue_pop(uep, ureq, -ECONNRESET);
}
- uep->pipe->mod_private = NULL;
- uep->pipe = NULL;
-
return 0;
}
+static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv)
+{
+ int i;
+ struct usbhsg_uep *uep;
+
+ usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
+ uep->pipe = NULL;
+}
+
/*
*
* usb_ep_ops
@@ -809,6 +815,11 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
unsigned long flags;
int ret = -EIO;
+ /* if it already have pipe,
+ * nothing to do */
+ if (uep->pipe)
+ return 0;
+
/******************** spin lock ********************/
spin_lock_irqsave(lock, flags);
@@ -1045,6 +1056,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
* pipe initialize and enable DCP
*/
usbhs_pipe_init(priv);
+ usbhsg_uep_init(gpriv);
usbhsg_dcp_enable(dcp);
/*
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
