Re: 2.6.38: rt2800usb: driver is crashing the kernel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Tue, 26 Apr 2011, Larry Finger wrote:


I am trying a different driver now: rt2870sta
I've read a few reports this may be the 'proper' one to use.
So far so good, no lag or anything and I did not have to set power off
either.

Driver rtl2870sta is not the proper one to use. In fact, a patch to delete rt2860sta and rt2870sta from the kernel was queued yesterday, and they will be gone by the time 2.6.40 is released.

New firmware for rt2800usb was just accepted into the linux-firmware git tree. Please obtain a copy and try it.

Larry


Hello,

With latest rt2800usb (and firmware from the git tree ~5 minutes ago)

Without wlan0 power off:

PING atomw (192.168.0.2) 56(84) bytes of data.
64 bytes from atomw (192.168.0.2): icmp_req=1 ttl=64 time=103 ms
64 bytes from atomw (192.168.0.2): icmp_req=2 ttl=64 time=106 ms
64 bytes from atomw (192.168.0.2): icmp_req=3 ttl=64 time=99.7 ms
64 bytes from atomw (192.168.0.2): icmp_req=4 ttl=64 time=102 ms
64 bytes from atomw (192.168.0.2): icmp_req=5 ttl=64 time=98.5 ms
64 bytes from atomw (192.168.0.2): icmp_req=6 ttl=64 time=9.74 ms
64 bytes from atomw (192.168.0.2): icmp_req=7 ttl=64 time=217 ms
64 bytes from atomw (192.168.0.2): icmp_req=8 ttl=64 time=141 ms
64 bytes from atomw (192.168.0.2): icmp_req=11 ttl=64 time=13.2 ms
^C
--- atomw ping statistics ---
11 packets transmitted, 9 received, 18% packet loss, time 10003ms
rtt min/avg/max/mdev = 9.744/99.095/217.349/58.880 ms

With latest rt2800usb (and firmware from the git tree ~5 minutes ago)

With wlan0 power off:

PING atomw (192.168.0.2) 56(84) bytes of data.
64 bytes from atomw (192.168.0.2): icmp_req=3 ttl=64 time=40.6 ms
64 bytes from atomw (192.168.0.2): icmp_req=4 ttl=64 time=0.894 ms
64 bytes from atomw (192.168.0.2): icmp_req=5 ttl=64 time=0.735 ms
64 bytes from atomw (192.168.0.2): icmp_req=6 ttl=64 time=0.693 ms
64 bytes from atomw (192.168.0.2): icmp_req=7 ttl=64 time=0.680 ms
^C
-- atomw ping statistics ---
7 packets transmitted, 5 received, 28% packet loss, time 6005ms
rtt min/avg/max/mdev = 0.680/8.723/40.615/15.946 ms

Switching back to rt2870sta, rt2800usb is unusable for me at this time.

With rt2870sta and the Media Link 150 / USB stick, (I have two, the problems
occur on both, using different USB ports as well using the rt2800usb driver)

$ ping atomw
PING atomw (192.168.0.2) 56(84) bytes of data.
64 bytes from atomw (192.168.0.2): icmp_req=1 ttl=64 time=1.07 ms
64 bytes from atomw (192.168.0.2): icmp_req=2 ttl=64 time=0.709 ms
64 bytes from atomw (192.168.0.2): icmp_req=3 ttl=64 time=0.921 ms
64 bytes from atomw (192.168.0.2): icmp_req=4 ttl=64 time=0.723 ms
64 bytes from atomw (192.168.0.2): icmp_req=5 ttl=64 time=0.752 ms
64 bytes from atomw (192.168.0.2): icmp_req=6 ttl=64 time=0.718 ms
64 bytes from atomw (192.168.0.2): icmp_req=7 ttl=64 time=0.745 ms
64 bytes from atomw (192.168.0.2): icmp_req=8 ttl=64 time=0.787 ms
64 bytes from atomw (192.168.0.2): icmp_req=9 ttl=64 time=0.835 ms
64 bytes from atomw (192.168.0.2): icmp_req=10 ttl=64 time=0.878 ms
64 bytes from atomw (192.168.0.2): icmp_req=11 ttl=64 time=0.704 ms
^C
--- atomw ping statistics ---
11 packets transmitted, 11 received, 0% packet loss, time 10010ms
rtt min/avg/max/mdev = 0.704/0.804/1.074/0.111 ms

Flawless, I hope the issues can be worked out with the rt2800usb driver, or
someone keeps a backport of the rt2870sta driver, thanks!

Here is some debug output from when I was using rt2800usb:

[  102.432319] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 0
[  102.913430] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 1
[  103.876437] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 2
[  103.918554] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 3
[  103.924421] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 5
[  103.939051] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 7
[  103.944339] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 8
[  103.959539] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 9
[  103.964800] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 10
[  103.973788] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 13
[  103.978632] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 14
[  103.984294] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 16
[  103.989152] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 17
[  104.249186] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 19
[  104.254079] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 20
[  104.259670] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 23
[  116.706277] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
[  116.845043] phy0 -> rt2800_txdone_entry_check: Warning - TX status report missed for queue 2 entry 24
[  122.706346] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
[  123.706360] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 2 status timed out, invoke forced tx handler
[  124.706329] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
[  126.706328] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
[  128.706301] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
[  129.706281] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 2 status timed out, invoke forced tx handler
[  130.706403] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 2 status timed out, invoke forced tx handler
[  153.706296] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler
[  162.706335] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 2 status timed out, invoke forced tx handler

Justin.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux