Linux RAID Storage Date Index

• Thread Index

• Implementing Encryption and Decryption in Raid Device Driver.
  • From: vinnakota chaitanya <chaitanyaa_v@xxxxxxxxx>
• Re: Promise SATAII150 TX4 or raidreconf broken - answer
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Software RAID1 problems
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• suggestions for SATA controllers (PCI-X or PCI-E), e.g. Highpoint, wanted
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Software RAID1 problems
  • From: Andy Dawson <A.J.Dawson@xxxxxxxxxxxxxx>
• Re: Anyone clueful on forcing 3ware drive discovery?
  • From: greg@xxxxxxxxxxxxxxxxx (Dr. Greg Wettstein)
• ANNOUNCE: mdadm 2.1 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm: which device set as source to mirror?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm: which device set as source to mirror?
  • From: Changsen Xu <xucs007@xxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm: which device set as source to mirror?
  • From: Changsen Xu <xucs007@xxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Promise SATAII150 TX4 or raidreconf broken
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Ric Wheeler <ric@xxxxxxx>
• Re: Accelerating Linux software raid
  • From: Konstantin Olchanski <olchansk@xxxxxxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Ric Wheeler <ric@xxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Accelerating Linux software raid
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Ric Wheeler <ric@xxxxxxx>
• RE: Promise SATAII150 TX4 or raidreconf broken
  • From: "Henrik Holst" <henrik.holst@xxxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Colonel Hell <amritanshu@xxxxxxxxx>
• Promise SATAII150 TX4 or raidreconf broken
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• OT: lilo overwriting partition info ?
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Anyone clueful on forcing 3ware drive discovery?
  • From: Konstantin Olchanski <olchansk@xxxxxxxxxxxxx>
• Re: Drive fails & raid6 array is not self rebuild .
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Anyone clueful on forcing 3ware drive discovery?
  • From: greg@xxxxxxxxxxxxxxxxx (Dr. Greg Wettstein)
• Drive fails & raid6 array is not self rebuild .
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• RE: my first raid disaster on reboot :o( update
  • From: Ken Walker <ken.walker@xxxxxxxxxxxxxxxx>
• Issue with MDADM raid 5
  • From: Jay Marsh <gerdalti@xxxxxxxxx>
• Issue with MDADM raid 5
  • From: Jay Marsh <gerdalti@xxxxxxxxx>
• Re: Accelerating Linux software raid
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Accelerating Linux software raid
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• my first raid disaster on reboot :o(
  • From: Ken Walker <ken.walker@xxxxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: MD or MDADM bug?
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• [PATCH md 003 of 3] Fix BUG when raid10 rebuilds without enough drives.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 3] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 3] Fix raid10 assembly when too many devices are missing.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 3] Really get sb_size setting right in all cases.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: MD or MDADM bug?
  • From: berk walker <berk@xxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: why the kernel and mdadm report differently
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: why the kernel and mdadm report differently
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: why the kernel and mdadm report differently
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: why the kernel and mdadm report differently
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: why the kernel and mdadm report differently
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: why the kernel and mdadm report differently
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• error in mdadm man page
  • From: "Pau Oliva - pof" <pau@xxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: danci@xxxxxxxxx
• Re: why the kernel and mdadm report differently
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• why the kernel and mdadm report differently
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: MD or MDADM bug?
  • From: Tyler <pml@xxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• [ANNOUNCE] multipath-tools-0.4.5
  • From: christophe varoqui <christophe.varoqui@xxxxxxx>
• Re: 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• Re: 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: berk walker <berk@xxxxxxxxx>
• Re: 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• RE: question regarding multipath & Linux 2.6
  • From: Jim Faulkner <james.faulkner@xxxxxxxx>
• RE: question regarding multipath & Linux 2.6
  • From: "Callahan, Tom" <CallahanT@xxxxxxxxxx>
• [PATCH md ] Make sure the new 'sb_size' is set properly device added without pre-existing superblock.
  • From: NeilBrown <neilb@xxxxxxx>
• [koenig@xxxxxxxxxxxxxxxxxxxxxxxxxxx: [suse-beta-e] RFC: time_adj for HZ==250 in kernel/timer.c ?]
  • From: Harald Koenig <koenig@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• 3ware RAID (was Re: RAID resync stalled at 99.7% ?)
  • From: Daniel Pittman <daniel@xxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID resync stalled at 99.7% ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxx>
• RAID resync stalled at 99.7% ?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Claas Hilbrecht <claas+maillinglists.linux-raid@xxxxxxxxxxxxxxxxx>
• Re: MD or MDADM bug?
  • From: Claas Hilbrecht <claas+maillinglists.linux-raid@xxxxxxxxxxxxxxxxx>
• Re: question regarding multipath & Linux 2.6
  • From: Luca Berra <bluca@xxxxxxxxxx>
• [PATCH md 002 of 5] Choose better default offset for bitmap.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 5] Add information about superblock version to /proc/mdstat
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 005 of 5] Report spare drives in /proc/mdstat
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 5] Use queue_hardsect_size instead of block_size for md superblock size calc.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 5] drivers/md/raid1.c: make a function static
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 5] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• [2.6 patch] drivers/md/raid1.c: make a function static
  • From: Adrian Bunk <bunk@xxxxxxxxx>
• MD or MDADM bug?
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: djani22@xxxxxxxxxxxxx
• question regarding multipath & Linux 2.6
  • From: Jim Faulkner <james.faulkner@xxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: "Dr. David Alan Gilbert" <dave@xxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: 2 partition kicked from 6 raid5
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: raid5: Disk failure on sdm, disabling device
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• raid5: Disk failure on sdm, disabling device
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Nick Piggin <nickpiggin@xxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: jmerkey <jmerkey@xxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: jmerkey <jmerkey@xxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Tom Callahan <callahant@xxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: jmerkey <jmerkey@xxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: Nick Piggin <nickpiggin@xxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: Jens Axboe <axboe@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Vojtech Pavlik <vojtech@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• RE: Where is the performance bottleneck?
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: 2 partition kicked from 6 raid5
  • From: dechris@xxxxxxxxxxxxx (Deak Krisztian)
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• 2 partition kicked from 6 raid5
  • From: dechris@xxxxxxxxxxxxx (Deak Krisztian)
• Re: Where is the performance bottleneck?
  • From: Peter Chubb <peterc@xxxxxxxxxxxxxxxxxx>
• Re: Fibre Channel Shared Raid 5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID-5 Expansion
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: RAID-5 Expansion
  • From: Patrick Hoover <phoover.eml@xxxxxxxxx>
• Re: RAID-5 Expansion
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• RAID-5 Expansion
  • From: Patrick Hoover <phoover.eml@xxxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Fibre Channel Shared Raid 5
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Where is the performance bottleneck?
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• [PATCH md 004 of 7] write-intent bitmap support for raid6
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 006 of 7] Ensure bitmap_writeback_daemon handles shutdown properly.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 007 of 7] Tidy up daemon stop/start code in md/bitmap.c
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 001 of 7] Remove old cruft from md_k.h header file.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 000 of 7] Introduction
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 003 of 7] Add write-intent-bitmap support to raid5
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 005 of 7] Use kthread infrastructure in md
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 002 of 7] Limit size of sb read/written to appropriate amount.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: Fibre Channel Shared Raid 5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Fibre Channel Shared Raid 5
  • From: Thomas Garner <tlg1466@xxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Fibre Channel Shared Raid 5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Fibre Channel Shared Raid 5
  • From: Thomas Garner <tlg1466@xxxxxxxxxxxx>
• Re: number of global spares?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• RE: number of global spares?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Daniel Pittman <daniel@xxxxxxxxxxxx>
• RE: number of global spares?
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• number of global spares?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Mirko Benz <mirko.benz@xxxxxx>
• Re: RAID 5 write performance advice
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Mirko Benz <mirko.benz@xxxxxx>
• [PATCH md 000 of 2] Introduction
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 001 of 2] Create a MODULE_ALIAS for md corresponding to it's block major number.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 002 of 2] Clear the 'recovery' flags when starting an md array.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• ANNOUNCE: mdadm 2.0 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: raid1 boot issues
  • From: Lewis Shobbrook <mylists@xxxxxxxxxxxxxxx>
• Re: raid1 boot issues
  • From: Lewis Shobbrook <mylists@xxxxxxxxxxxxxxx>
• Re: raid1 boot issues
  • From: Berk Walker <berk@xxxxxxxxx>
• Re: raid1 boot issues
  • From: Lewis Shobbrook <mylists@xxxxxxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Mirko Benz <mirko.benz@xxxxxx>
• Re: raid1 boot issues
  • From: Tyler <pml@xxxxxxxx>
• raid1 boot issues
  • From: Lewis Shobbrook <mylists@xxxxxxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID 5 write performance advice
  • From: Mirko Benz <mirko.benz@xxxxxx>
• Re: RAID 5 write performance advice
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RAID 5 write performance advice
  • From: Mirko Benz <mirko.benz@xxxxxx>
• Re: RAID10 vs. LVM on RAID1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: RAID10 vs. LVM on RAID1
  • From: "Andrew Rechenberg Lists" <flux-ml@xxxxxxxxxxxxx>
• Re: RAID10 vs. LVM on RAID1
  • From: John McMonagle <johnm@xxxxxxxxxxx>
• RE: RAID10 vs. LVM on RAID1
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• [PATCH md 002 of 8] Support md/linear array with components greater than 2 terabytes.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 005 of 8] Do not set mddev->bitmap until bitmap is fully initialised
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 007 of 8] Allow md to load a superblock with feature-bit '1' set
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 001 of 8] Make sure resync gets started when array starts.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 000 of 8] Introduction
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 008 of 8] Fix bitmap/read_sb_page so that it handles errors properly.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 006 of 8] Allow hot-adding devices to arrays with non-persistant superblocks.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 004 of 8] Make sure bitmap_daemon_work actually does work.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 003 of 8] raid1_quiesce is back to front, fix it.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID10 vs. LVM on RAID1
  • From: "J. Ryan Earl" <ryan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• RAID10 vs. LVM on RAID1
  • From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• [2.6 patch] drivers/md/raid1.c: make a function static
  • From: Adrian Bunk <bunk@xxxxxxxxx>
• Re: Oops in raid1?
  • From: djani22@xxxxxxxxxxxxx
• Re: Oops in raid1?
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: Oops in raid1?
  • From: djani22@xxxxxxxxxxxxx
• Re: Oops in raid1?
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Oops in raid1?
  • From: djani22@xxxxxxxxxxxxx
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: perfomance question.
  • From: djani22@xxxxxxxxxxxxx
• Re: Found a new bug!
  • From: djani22@xxxxxxxxxxxxx
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: perfomance question.
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Found a new bug!
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Tyler <pml@xxxxxxxx>
• [PATCH] proactive raid5 disk replacement for 2.6.11, updated
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• [2.4.30] raidstop command hang until recovering of raid 1 finished.
  • From: Ricky <rickycheng@xxxxxxxxxxx>
• Re: RAID6 Query
  • From: Colonel Hell <amritanshu@xxxxxxxxx>
• Re: RAID6 Query
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• RAID6 Query
  • From: Colonel Hell <amritanshu@xxxxxxxxx>
• perfomance question.
  • From: djani22@xxxxxxxxxxxxx
• Re: confused raid1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: confused raid1
  • From: Tyler <pml@xxxxxxxx>
• [-mm PATCH 24/32] drivers/md: fix-up schedule_timeout() usage
  • From: Nishanth Aravamudan <nacc@xxxxxxxxxx>
• Problem compiling 'raidtools'
  • From: "Gary Guthary" <gguthary@xxxxxxxxx>
• Re: confused raid1
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• Re: confused raid1
  • From: Tyler <pml@xxxxxxxx>
• Re: confused raid1
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• Re: confused raid1
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• Re: confused raid1
  • From: Tyler <pml@xxxxxxxx>
• Re: confused raid1
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• confused raid1
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Found a new bug!
  • From: djani22@xxxxxxxxxxxxx
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Claas Hilbrecht <claas+maillinglists.linux-raid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: convert legacy array in place?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID readonly before final shutdown
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Found a new bug!
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Found a new bug!
  • From: djani22@xxxxxxxxxxxxx
• Re: [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• convert legacy array in place?
  • From: Stephen Walton <stephen.walton@xxxxxxxx>
• Re: [PATCH] proactive raid5 disk replacement for 2.6.11 [fixed patch]
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• [PATCH] proactive raid5 disk replacement for 2.6.11
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: How to force a spare drive to take over in a RAID5?
  • From: "Mark Cuss" <mcuss@xxxxxxxxxxxxxx>
• Re: How to recover a multiple raid5 disk failure with mdadm?
  • From: Claas Hilbrecht <claas+maillinglists.linux-raid@xxxxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Brent Walsh <blinux_adm@xxxxxxxxx>
• Re: Rebuilt Array Issue
  • From: Tyler <pml@xxxxxxxx>
• Re: Rebuilt Array Issue
  • From: Tyler <pml@xxxxxxxx>
• Rebuilt Array Issue
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: How to force a spare drive to take over in a RAID5?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID5 spare change
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RAID5 spare change
  • From: djani22@xxxxxxxxxxxxx
• [PATCH md 003 of 6] Improve handling of bitmap initialisation.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 000 of 6] Introduction
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 006 of 6] Add write-behind support for md/raid1
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 002 of 6] Don't allow new md/bitmap file to be set if one already exists
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 005 of 6] Support write-mostly device in raid1
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 001 of 6] Make sure mddev->bitmap_offset gets cleared between array instantiations.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 004 of 6] All hot-add and hot-remove of md intent logging bitmaps
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: Migrating from non-RAID to RAID-1
  • From: Shaun Jackman <sjackman@xxxxxxxxx>
• RAID readonly before final shutdown
  • From: Gaspar Bakos <gbakos@xxxxxxxxxxxxxxx>
• Re: Hitachi 7K500
  • From: Tyler <pml@xxxxxxxx>
• Re: Migrating from non-RAID to RAID-1
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Hitachi 7K500
  • From: Gaspar Bakos <gbakos@xxxxxxxxxxxxxxx>
• Re: Migrating from non-RAID to RAID-1
  • From: Shaun Jackman <sjackman@xxxxxxxxx>
• Migrating from non-RAID to RAID-1
  • From: Shaun Jackman <sjackman@xxxxxxxxx>
• Re: How to force a spare drive to take over in a RAID5?
  • From: "Mark Cuss" <mcuss@xxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Brent Walsh <blinux_adm@xxxxxxxxx>
• Re: How to force a spare drive to take over in a RAID5?
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: How to force a spare drive to take over in a RAID5?
  • From: "Mark Cuss" <mcuss@xxxxxxxxxxxxxx>
• How to recover a multiple raid5 disk failure with mdadm?
  • From: Claas Hilbrecht <claas+maillinglists.linux-raid@xxxxxxxxxxxxxxxxx>
• Re: SOLVED: forcing boot ordering of multilevel RAID arrays
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• NEED TO REPLACE RAID1 EVERYTHING
  • From: berk walker <berk@xxxxxxxxx>
• SOLVED: forcing boot ordering of multilevel RAID arrays
  • From: Trevor Cordes <trevor@xxxxxxxxxxxxx>
• Re: RAID5 question.
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: How to force a spare drive to take over in a RAID5?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Getting md0 to come back automatically
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Getting md0 to come back automatically
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: RAID6 starts before RAID0 component - how to force the order?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: does chunksize matter in raid-1?
  • From: "J. Ryan Earl" <ryan@xxxxxxxxxxxxxxxxxxx>
• Strategy Question
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: does chunksize matter in raid-1?
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: RAID6 starts before RAID0 component - how to force the order?
  • From: Tyler <pml@xxxxxxxx>
• RAID6 starts before RAID0 component - how to force the order?
  • From: Trevor Cordes <trevor@xxxxxxxxxxxxx>
• does chunksize matter in raid-1?
  • From: Jeff Breidenbach <breidenbach@xxxxxxxxx>
• How to force a spare drive to take over in a RAID5?
  • From: "Mark Cuss" <mcuss@xxxxxxxxxxxxxx>
• Re: File corruption on LVM2 on top of software RAID1
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: File corruption on LVM2 on top of software RAID1
  • From: "Simon Matter" <simon.matter@xxxxxxxxx>
• Re: File corruption on LVM2 on top of software RAID1
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: File corruption on LVM2 on top of software RAID1
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: RAID5 question.
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Setup a Raid while OS is running
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Setup a Raid while OS is running
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: RAID5 question.
  • From: djani22@xxxxxxxxxxxxx
• Re: RAID5 question.
  • From: Raz Ben Jehuda <razb@xxxxxxxxxxx>
• Re: RAID5 question.
  • From: djani22@xxxxxxxxxxxxx
• Re: RAID5 question.
  • From: Raz Ben Jehuda <razb@xxxxxxxxxxx>
• Re: RAID5 question.
  • From: djani22@xxxxxxxxxxxxx
• Setup a Raid while OS is running
  • From: "Stefan Majer" <stefan@xxxxxxxxxxxxx>
• Re: RAID5 question.
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: RAID5 question.
  • From: Raz Ben Jehuda <razb@xxxxxxxxxxx>
• RAID5 question.
  • From: djani22@xxxxxxxxxxxxx
• Re: Question about MD multipathing
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• RE: Question about MD multipathing
  • From: <martin.lonkwitz.sp@xxxxxxxxxxxxx>
• Re: Question about MD multipathing
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
• Re: RAID read performance
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Daniel Pittman <daniel@xxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH md 000 of 7] Introduction
  • From: Andrew Morton <akpm@xxxxxxxx>
• ANNOUNCE: mdadm 2.0-devel-3 DEVELOPMENT RELEASE - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH md 000 of 7] Introduction
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH md 000 of 7] Introduction
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: raid5 endian question....
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: 3ware raid question
  • From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
• Re: 3ware raid question
  • From: Raz Ben Jehuda <razb@xxxxxxxxxxx>
• Re: 3ware raid question
  • From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
• Re: endianness of Linux kernel RAID
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Question about MD multipathing
  • From: <martin.lonkwitz.sp@xxxxxxxxxxxxx>
• endianness of Linux kernel RAID
  • From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
• Re: 3ware raid question
  • From: Raz Ben Jehuda <razb@xxxxxxxxxxx>
• RAID read performance
  • From: "Boik Moon" <bmoon@xxxxxxxxxxxxxxxxx>
• Re: 3ware raid question
  • From: Jason Leach <jason.leach@xxxxxxxxx>
• Re: 3ware raid question
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Fun with raid...
  • From: Lars Schimmer <schimmer@xxxxxxxxxxxxx>
• 3ware raid question
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• [PATCH md 003 of 7] Fix minor error in raid10 read-balancing calculation.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 002 of 7] Make 'md' and alias for 'md-mod'
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 004 of 7] Fail IO request to md that require a barrier.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 000 of 7] Introduction
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 007 of 7] Make sure md bitmap updates are flushed when array is stopped.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 006 of 7] Yet another attempt to get bitmap-based resync to do the right thing in all cases...
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 005 of 7] Always honour md bitmap being read from disk
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• [PATCH md 001 of 7] Remove a stray debugging printk.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: One disk busy in RAID5?
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• RE: Multiplexed RAID-1 mode
  • From: "Al Boldi" <a1426z@xxxxxxxxx>
• Re: Multiplexed RAID-1 mode
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Multiplexed RAID-1 mode
  • From: Jeff Breidenbach <breidenbach@xxxxxxxxx>
• [PATCH md ] Make sure raid5/raid6 resync uses correct 'max_sectors'
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: Multiplexed RAID-1 mode
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Multiplexed RAID-1 mode
  • From: "Al Boldi" <a1426z@xxxxxxxxx>
• Re: [RAID] SATA RAID-1 benchmarks
  • From: Jeff Breidenbach <breidenbach@xxxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: [RAID] SATA RAID-1 benchmarks
  • From: Julian Cowley <julian@xxxxxxxx>
• Re: SATA RAID-1 benchmarks
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: One disk busy in RAID5?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• SATA RAID-1 benchmarks
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• One disk busy in RAID5?
  • From: Scott White <scott-raid@xxxxxxxxxxxx>
• Re: Adaptec 79xx HostRAID support
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Adaptec 79xx HostRAID support
  • From: "Tim Kent" <tim.kent@xxxxxxxxxxxxxxxxxxx>
• [patch 01/18] bio_clone fix
  • From: akpm@xxxxxxxx
• Re: raidreconfig advice
  • From: Max Waterman <davidmaxwaterman+news@xxxxxxxxxxxxxx>
• Re: 3ware + RAID5 + xfs performance
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: 3ware + RAID5 + xfs performance
  • From: Jan-Frode Myklebust <Jan-Frode.Myklebust@xxxxxxxxxxx>
• Re: 3ware + RAID5 + xfs performance
  • From: Harry Mangalam <hjm@xxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: 3ware + RAID5 + xfs performance
  • From: Jan-Frode Myklebust <Jan-Frode.Myklebust@xxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: bug report: mdadm-devel-2 , superblock version 1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Tyler <pml@xxxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Tyler <pml@xxxxxxxx>
• Re: Multipath
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Failed RAID-5 with 4 disks
  • From: Frank Blendinger <fb@xxxxxxxxxxxxxxxxxxx>
• Multipath
  • From: Selim Daoud <selim.daoud@xxxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: Can't work out how to recover after multiple failures
  • From: "J. Ali Harlow" <ali@xxxxxxxxxxxxx>
• Re: 3ware + RAID5 + xfs performance
  • From: Harry Mangalam <hjm@xxxxxxxxx>
• 3ware + RAID5 + xfs performance
  • From: Gaspar Bakos <gbakos@xxxxxxxxxxxxxxx>
• strange SATA phenomenon
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: bug report: mdadm-devel-2 , superblock version 1
  • From: Tyler <pml@xxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Tyler <pml@xxxxxxxx>
• Re: bug report: mdadm-devel-2 , superblock version 1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: bug report: mdadm-devel-2 , superblock version 1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Can't work out how to recover after multiple failures
  • From: "J. Ali Harlow" <ali@xxxxxxxxxxxxx>
• Re: Software RAID on Windows using Embedded Linux?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Software RAID on Windows using Embedded Linux?
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Any chance you can look at this Superblock v1 bug Neil?
  • From: Tyler <pml@xxxxxxxx>
• Any chance you can look at this Superblock v1 bug Neil?
  • From: Tyler <tyler@xxxxxxxx>
• Re: strange raid5
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: strange raid5
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: strange raid5
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: strange raid5
  • From: Tyler <pml@xxxxxxxx>
• strange raid5
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• assemble/hot add problem with bitmap raid1
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• Re: Re: Re: Re[2]: Bugreport mdadm-2.0-devel-1
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Jim Radford <jradford@xxxxxxx>
• Re: Re: Re[2]: Bugreport mdadm-2.0-devel-1
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• Re: 2.6.13-rc3 (ide ?) kernel crash
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• 2.6.13-rc3 (ide ?) kernel crash
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Recovery raid5 after sata cable failure.
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• RE: Recovery raid5 after sata cable failure.
  • From: "Francisco Zafra" <fzafra@xxxxxxxxx>
• RE: Recovery raid5 after sata cable failure.
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: Recovery raid5 after sata cable failure.
  • From: "Francisco Zafra" <fzafra@xxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: bug report: mdadm-devel-2 , superblock version 1
  • From: Tyler <pml@xxxxxxxx>
• Re: Raid5 Failure
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Tyler <pml@xxxxxxxx>
• bug report: mdadm-devel-2 , superblock version 1
  • From: Tyler <pml@xxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Tyler <pml@xxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Found a new bug!
  • From: djani22@xxxxxxxxxxxxx
• Re: Found a new bug!
  • From: djani22@xxxxxxxxxxxxx
• Re: Found a new bug!
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Recovery raid5 after sata cable failure.
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• [patch] Boot recreation of md device with failed device
  • From: Chet McNeill <chet@xxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• RE: Recovery raid5 after sata cable failure.
  • From: "Francisco Zafra" <fzafra@xxxxxxxxx>
• Found a new bug!
  • From: djani22@xxxxxxxxxxxxx
• Recovery raid5 after sata cable failure.
  • From: "Francisco Zafra" <fzafra@xxxxxxxxx>
• [PATCH md ] When resizing an array, we need to update resync_max_sectors as well as size.
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: Eric Sandall <eric@xxxxxxxxxx>
• Re: [patch] linear does not need chunksize
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Jim Radford <jradford@xxxxxxx>
• Re: [patch] linear does not need chunksize
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Jim Radford <jradford@xxxxxxx>
• [patch] linear does not need chunksize
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Jim Radford <jradford@xxxxxxx>
• Re: md_import_device returned -16 raid1
  • From: Tyler <pml@xxxxxxxx>
• md_import_device returned -16 raid1
  • From: Jim Radford <jradford@xxxxxxx>
• Re: RAID 5 Grow
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Raid-6 stability gets my vote
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: RAID 5 Grow
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID 5 Grow
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: RAID 5 Grow
  • From: Simon Valiquette <v.simon@xxxxxxxx>
• RAID 5 Grow
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: How to auto rebuild array?
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Re: How to auto rebuild array?
  • From: Rui Santos <rsantos@xxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• [PATCH md ] md/raid1: clear bitmap when fullsync completes
  • From: NeilBrown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: Re[2]: Bugreport mdadm-2.0-devel-1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Raid5 Failure
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Raid5 Failure
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: disk failed, operator error: Now can't use RAID
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: Oops when starting md multipath on a 2.4 kernel
  • From: James Pearson <james-p@xxxxxxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: Oops when starting md multipath on a 2.4 kernel
  • From: Luciano Chavez <lnx1138@xxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Oops when starting md multipath on a 2.4 kernel
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: Oops when starting md multipath on a 2.4 kernel
  • From: James Pearson <james-p@xxxxxxxxxxxxxxxxxx>
• Re: disk failed, operator error: Now can't use RAID
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: How to auto rebuild array?
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Re: Oops when starting md multipath on a 2.4 kernel
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• disk failed, operator error: Now can't use RAID
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• disk failed, operator error: Now can't use RAID
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: How to auto rebuild array?
  • From: Rui Santos <rsantos@xxxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Oops when starting md multipath on a 2.4 kernel
  • From: James Pearson <james-p@xxxxxxxxxxxxxxxxxx>
• Re: Raid, resync and hotspare
  • From: Louis-David Mitterrand <vindex@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: berk walker <berk@xxxxxxxxx>
• Re: RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• Re: RAID-5 streaming read performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Raid, resync and hotspare
  • From: Laurent CARON <lcaron@xxxxxxxxxx>
• How to auto rebuild array?
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Re: sofware raid5 oops
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• RAID-5 streaming read performance
  • From: Dan Christensen <jdc@xxxxxx>
• sofware raid5 oops
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: RAID1 assembly requires manual "mdadm --run"
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: RAID1 assembly requires manual "mdadm --run"
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: mdadm memory leak?
  • From: Eric Sandall <eric@xxxxxxxxxx>
• Re: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• Re: RAID1 assembly requires manual "mdadm --run"
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Re[2]: Bugreport mdadm-2.0-devel-1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Tyler <pml@xxxxxxxx>
• Re: mdadm memory leak?
  • From: Tyler <pml@xxxxxxxx>
• Re: RAID1 assembly requires manual "mdadm --run"
  • From: Tyler <pml@xxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• Re: skip raid5 reconstruction
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID1 assembly requires manual "mdadm --run"
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: skip raid5 reconstruction
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: Degraded raid5 returns mdadm: /dev/hdc5 has no superblock - assembly aborted
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Turbo Fredriksson <turbo@xxxxxxxxxx>
• Re: skip raid5 reconstruction
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID1 assembly requires manual "mdadm --run"
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Degraded raid5 returns mdadm: /dev/hdc5 has no superblock - assembly aborted
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Degraded raid5 returns mdadm: /dev/hdc5 has no superblock - assembly aborted
  • From: Daniel Pittman <daniel@xxxxxxxxxxxx>
• Re: Degraded raid5 returns mdadm: /dev/hdc5 has no superblock - assembly aborted
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: skip raid5 reconstruction
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: Degraded raid5 returns mdadm: /dev/hdc5 has no superblock - assembly aborted
  • From: Daniel Pittman <daniel@xxxxxxxxxxxx>
• Degraded raid5 returns mdadm: /dev/hdc5 has no superblock - assembly aborted
  • From: Melinda Taylor <melinda@xxxxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Mathieu Chouquet-Stringer <ml2news@xxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: RAID5 rebuild question
  • From: David Greaves <david@xxxxxxxxxxxx>
• raid5 crash
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• RAID1 assembly requires manual "mdadm --run"
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re[2]: Bugreport mdadm-2.0-devel-1
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• Re: Bugreport mdadm-2.0-devel-1
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: mdadm memory leak?
  • From: "Bailey, Scott" <scott.bailey@xxxxxxx>
• Re: skip raid5 reconstruction
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: skip raid5 reconstruction
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Bugreport mdadm-2.0-devel-1
  • From: Maxim Kozover <maximkoz@xxxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: Eric Sandall <eric@xxxxxxxxxx>
• Re: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• Re: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• Re: mdadm memory leak?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: AW: skip raid5 reconstruction
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: AW: skip raid5 reconstruction
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• skip raid5 reconstruction
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RE: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• Re: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• RE: mdadm memory leak?
  • From: Eric Sandall <eric@xxxxxxxxxx>
• Re: mdadm memory leak?
  • From: Eric Sandall <eric@xxxxxxxxxx>
• RE: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Inactive RAID5 and different states
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: mdadm memory leak?
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• mdadm memory leak?
  • From: David Kowis <dkowis@xxxxxxxxx>
• RE: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RE: raid0 low performance
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Turbo Fredriksson <turbo@xxxxxxxxxx>
• Re: mdadm -f ?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Why does my drive get set readonly?
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: A general Raid 5 question
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: RAID5 rebuild question
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• RE: RAID5 rebuild question
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: raz ben jehuda <razb@xxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Frank Wittig <fw@xxxxxxxxxxxx>
• RE: RAID5 rebuild question
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: raz ben jehuda <razb@xxxxxxxxxxx>
• RAID5 rebuild question
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Inactive RAID5 and different states
  • From: Jacob Madsen <01771@xxxxxx>
• RE: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RE: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RE: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RE: raid0 low performance
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: raid0 low performance
  • From: "John Madden" <jmadden@xxxxxxxxxxx>
• Re: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: A general Raid 5 question
  • From: Clemens Schwaighofer <cs@xxxxxxxxxxxxx>
• Re: raid0 low performance
  • From: "John Madden" <jmadden@xxxxxxxxxxx>
• Re: raid0 low performance
  • From: Tyler <pml@xxxxxxxx>
• raid0 low performance
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Frank Wittig <fw@xxxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Laurent CARON <lcaron@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID1: What happens when one half of a mirror fails?
  • From: Frank Wittig <fw@xxxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: "J. Ryan Earl" <ryan@xxxxxxxxxxxxxxxxxxx>
• Re: Hung rebuilding
  • From: Sandro Dentella <sandro@xxxxxxxx>
• RAID1: What happens when one half of a mirror fails?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: Hung rebuilding
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: "Dinesh" <dinesh@xxxxxxxxxxxxxxxx>
• Re: Hung rebuilding
  • From: Sandro Dentella <sandro@xxxxxxxx>
• Hung rebuilding
  • From: Sandro Dentella <sandro@xxxxxxxx>
• RE: linux-raid compatable w/ Adaptec AIC-7902?
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Re: linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• linux-raid compatable w/ Adaptec AIC-7902?
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• RE: problems creating my first raid 1 on Debian
  • From: Ken Walker <ken.walker@xxxxxxxxxxxxxxxx>
• Re: problems creating my first raid 1 on debian
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• fast build raid5
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Slow reconstruction
  • From: KELEMEN Peter <Peter.Kelemen@xxxxxxx>
• Re: Slow reconstruction
  • From: Tyler <pml@xxxxxxxx>
• Re: Slow reconstruction
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: Slow reconstruction
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: Slow reconstruction
  • From: KELEMEN Peter <Peter.Kelemen@xxxxxxx>
• Re: Slow reconstruction
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: Slow reconstruction
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: Slow reconstruction
  • From: seth vidal <skvidal@xxxxxxxxxxxx>
• Re: Slow reconstruction
  • From: Mike Hardy <mhardy@xxxxxxx>
• Slow reconstruction
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: David Dougall <davidd@xxxxxxxxxx>
• Re: problems creating my first raid 1 on debian
  • From: Tyler <pml@xxxxxxxx>
• MAX_CHUNK_SIZE
  • From: Sebastian Claßen <Sebastian.Classen@xxxxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Why does my drive get set readonly?
  • From: Ruth Ivimey-Cook <Ruth.Ivimey-Cook@xxxxxxxxxx>
• mdadm -f ?
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• problems creating my first raid 1 on debian
  • From: Ken Walker <ken.walker@xxxxxxxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Trouble with SATA drives: "IRQ disabled"
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: Problems with software RAID + iSCSI or GNBD
  • From: Michael Stumpf <mjstumpf@xxxxxxxxx>
• Re: mdstat: resync=DELAYED
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• mdstat: resync=DELAYED
  • From: Eric Pretorious <eric@xxxxxxxxxxxxxx>
• Repost --- please help, did "mdadm --create" make my data unrecoverable?
  • From: David Wuertele <dave-gnus@xxxxxxxxx>
• Re: Adding spare to running array?
  • From: "Catalin(ux aka Dino) BOIE" <util@xxxxxxxxxxxxxxx>
• Adding spare to running array?
  • From: Michael Frotscher <infomails@xxxxxxxxxxxxxxxxxxxxx>
• Re: what is /dev/.static/dev/md0 ???
  • From: "Bernd Schubert" <Bernd.Schubert@xxxxxxxxxxxxxxxxxxxxxxxx>
• Problems with software RAID + iSCSI or GNBD
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• modify mdadm-raid script
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• /dev/.static/dev/md0 works - weird...
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• what is /dev/.static/dev/md0 ???
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• can we run a degraded raid 1 normally (without adding in a replacement second drive)
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• mdadm --run required to start raid1 device /dev/md0 after removal of one drive. why?
  • From: Mitchell Laks <mlaks@xxxxxxxxxxx>
• Problem with software RAID-5
  • From: Radu Filip <radu@xxxxxxxxx>
• OOPS! Did I screw myself with mdadm --create?
  • From: David Wuertele <dave-gnus@xxxxxxxxx>
• 6 drives (out of 7) and 1 spare
  • From: David Wuertele <dave-gnus@xxxxxxxxx>
• Re: timeouts on 3ware 5800.. driver issue?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• timeouts on 3ware 5800.. driver issue?
  • From: Michael Stumpf <mjstumpf@xxxxxxxxx>
• Re: RAID5 attempt rebuilding despite being incomplete
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Re: from raidtools2 to mdadm
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID5 attempt rebuilding despite being incomplete
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: RAID5 attempt rebuilding despite being incomplete
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• RE: More tales of horror from the linux (HW) raid crypt
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: More tales of horror from the linux (HW) raid crypt
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: RAID5 attempt rebuilding despite being incomplete
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• RE: More tales of horror from the linux (HW) raid crypt
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• RE: More tales of horror from the linux (HW) raid crypt
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• RAID5 attempt rebuilding despite being incomplete
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Detection of drive failure using external USB2/firewire disks
  • From: "Preben Mikael Bohn" <preben@xxxxxxx>
• RE: More tales of horror from the linux (HW) raid crypt
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: More tales of horror from the linux (HW) raid crypt
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: More tales of horror from the linux (HW) raid crypt
  • From: bdameron@xxxxxxxxxxxxx
• Re: More tales of horror from the linux (HW) raid crypt
  • From: bdameron@xxxxxxxxxxxxx
• Re: More tales of horror from the linux (HW) raid crypt
  • From: bdameron@xxxxxxxxxxxxx