Following to the previous mail. I really need to recover the data in the
array. I didn't think it was sure to fsck during a stuck reconstruction so I
set faulty the disk that is probably faulty
mdadm /dev/md3 --fail /dev/hda7 (devfs way really...)
mdadm /dev/md3 --remove /dev/hda7 (devfs way really...)
now I read
srv-ornago:~# cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
(...)
md3 : active raid1 ide/host0/bus1/target0/lun0/part7[1]
74340672 blocks [2/1] [_U]
[>....................] recovery = 0.0% (192/74340672) finish=328392.5min speed=0K/sec
unused devices: <none>
so it is marked _U but is still under recovery!!!
Is it safe to fsck now? (at least as w/ 1 single disk...)
TIA
sandro
*:-)
--
Sandro Dentella *:-)
e-mail: sandro@xxxxxxxx
http://www.tksql.org TkSQL Home page - My GPL work
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
