Re: disk failed, operator error: Now can't use RAID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday July 13, hbarta@xxxxxxxxx wrote:
> 
> I would very much appreciate suggestions on how to get the raid
> running again.

Remove the 
>    devices=/dev/hde1,/dev/sdd1,/dev/sdc1,/dev/sdb1,/dev/sda1

line from mdadm.conf (it is wrong and un-needed).

Then
  mdadm -S /dev/md0  # just to be sure
  mdadm -A /dev/md0 -f /dev/sd[abcd]1 /dev/hd[eg]1

and see if that works.

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux