Deak Krisztian wrote:
Hi,
i have a big problem. A had a sw raid5 array with 6 partition. The array
has been damaged because problems of power connectors. 2 partitions/disks don't work,
because during the time the SATA power connections didn't work.
Some write/read operations where running. Now when i want to
run the array loading the kernel, i get the next message:
raid5: device sdl1 operational as raid disk 0
raid5: device sdj1 operational as raid disk 5
raid5: device sdh1 operational as raid disk 3
raid5: device sdg1 operational as raid disk 2
raid5: not enough operational devices for md0 (2/6 failed)
Are you using raid autostart (in-kernel auto-activating of raid
arrays) or bring it up using mdadm? If the latter, try adding
--run option. If the former, your only choice is to use some
rescue CD or something, and again, to try this same mdadm --run...
Depending on where/how you got to this state, your data may
be just fine.
/mjt
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
