Linux RAID Storage Date Index

• Thread Index

• resize2fs failing--how to resize my fs?
  • From: Michael Stumpf <mjstumpf@xxxxxxxxx>
• Re: stripe_cache_size ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH md 020 of 20] Allow sync-speed to be controlled per-device
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: [PATCH md 013 of 20] Count corrected read errors per drive.
  • From: Andrew Morton <akpm@xxxxxxxx>
• [PATCH md 020 of 20] Allow sync-speed to be controlled per-device
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 019 of 20] Support adding new devices to md arrays via sysfs
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 018 of 20] Allow available size of component devices to be set via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 017 of 20] Export rdev->data_offset via sysfs
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 016 of 20] Expose device slot information via sysfs
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 015 of 20] Keep better track of dev/array size when assembling md arrays.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 014 of 20] Allow md/raid_disks to be settable.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 013 of 20] Count corrected read errors per drive.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 012 of 20] Allow array level to be set textually via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 011 of 20] Expose md metadata format in sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 010 of 20] Allow md array component size to be accessed and set via sysfs
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 009 of 20] Allow chunk_size to be settable through sysfs
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 008 of 20] Fix rdev->pending counts in raid1
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 007 of 20] Make sure bitmap updates are visible through filesystem.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 006 of 20] Make a couple of names in md.c static
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 005 of 20] Fix typo in comment.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 20] Helper function to match commands written to sysfs files.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 20] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 20] Use correct size of raid5 stripe cache when measuring how full it is.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 20] Define and use safe_put_page for md.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 20] Fix a use-after-free bug in raid1
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Yanggun <yang.geum.seok@xxxxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: raid1 mysteriously switching to read-only
  • From: Yanggun <yang.geum.seok@xxxxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Yanggun <yang.geum.seok@xxxxxxxxx>
• raidreconf on raid-5, SATA, inf. Write Errors
  • From: Jean-Luc Cooke <jlcooke@xxxxxxxxxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Yanggun <yang.geum.seok@xxxxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Yanggun <yang.geum.seok@xxxxxxxxx>
• Re: raid1 mysteriously switching to read-only
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 017 of 18] Handle errors when read-only
  • From: Yanggun <yang.geum.seok@xxxxxxxxx>
• Re: stripe_cache_size ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: stripe_cache_size ?
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Re: stripe_cache_size ?
  • From: Neil Brown <neilb@xxxxxxx>
• stripe_cache_size ?
  • From: "Kyle Wong" <kylewong@xxxxxxxxxx>
• Re: mdadm source rpm build error + command-line parsing error + resync reporting problem
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: mdadm source rpm build error + command-line parsing error + resync reporting problem
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm source rpm build error + command-line parsing error + resync reporting problem
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: mdadm source rpm build error + command-line parsing error + resync reporting problem
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm source rpm build error + command-line parsing error + resync reporting problem
  • From: Mike Hardy <mhardy@xxxxxxx>
• mdadm source rpm build error + command-line parsing error + resync reporting problem
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: RAID5 resync question BUGREPORT!
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 resync question BUGREPORT!
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: raid5 in degraded mode; trying to revive
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 in degraded mode; trying to revive
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 resync question BUGREPORT!
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 resync question BUGREPORT!
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: [Ext2-devel] Re: Journal-guided Resynchronization for Software RAID
  • From: Andreas Dilger <adilger@xxxxxxxxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: Holger Kiehl <Holger.Kiehl@xxxxxx>
• Re: RAID5 problem
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: raid5 in degraded mode; trying to revive
  • From: Milo <search.lists@xxxxxxxxx>
• Re: raid5 in degraded mode; trying to revive
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• performance question about cache/buffers (not exactly raid)
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: random lockups, raid problems SOLVED (plus a question)
  • From: Mattias Wadenstein <maswan@xxxxxxxxxx>
• Re: raid5 in degraded mode; trying to revive
  • From: Milo <search.lists@xxxxxxxxx>
• Re: RAID5 resync question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: raid5 in degraded mode; trying to revive
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid1 "synchronous" mirror question
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 resync question
  • From: Neil Brown <neilb@xxxxxxx>
• random lockups, raid problems SOLVED (plus a question)
  • From: Michael Stumpf <mjstumpf@xxxxxxxxx>
• RAID card
  • From: Sharif Islam <mislam@xxxxxxxx>
• Re: ANNOUNCE: mdadm 2.2 - A tool for managing Soft RAID under Linux
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: RAID5 resync question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Raid1 "synchronous" mirror question
  • From: Robert Heinzmann <Robert.Heinzmann@xxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• raid5 in degraded mode; trying to revive
  • From: Milo <search.lists@xxxxxxxxx>
• Re: [PATCH md 002 of 14] Allow raid1 to check consistency
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: RAID5 problem
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: RAID5 resync question
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 resync question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: RAID5 resync question
  • From: Neil Brown <neilb@xxxxxxx>
• RAID5 resync question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: [PATCH md 010 of 14] Convert various kmap calls to kmap_atomic
  • From: Neil Brown <neilb@xxxxxxx>
• Re: 2.6.15-rc5-mm1: raid related oops
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 002 of 14] Allow raid1 to check consistency
  • From: Neil Brown <neilb@xxxxxxx>
• 2.6.15-rc5-mm1: raid related oops
  • From: jurriaan <thunder7@xxxxxxxxx>
• Re: mdadm --size and --update=uuid etc options...
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: Alfons Andorfer <a_a@xxxxxx>
• mdadm --size and --update=uuid etc options...
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: what does this mean: ioctl lock interrupted
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• ANNOUNCE: mdadm 2.2 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH md 001 of 2] Change case of raid level reported in sys/mdX/md/level
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 2] Remove inappropriate limits in md/bitmap configuration.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 2] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: need help with raid6 recovery
  • From: Neil Brown <neilb@xxxxxxx>
• Re: is it possible to change the UUID of an array?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: what does this mean: ioctl lock interrupted
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• RAID 0 and 1 Benchmark
  • From: Carles Pina i Estany <carles@xxxxxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: Neil Brown <neilb@xxxxxxx>
• Re: newbie - mdadm create raid1 mirrors on large drives
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Does mdadm --create harm existing data?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 problem
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• RAID5 problem
  • From: Alfons Andorfer <a_a@xxxxxx>
• Problems with 2.6.14.3
  • From: Clemens Schwaighofer <cs@xxxxxxxxxxxxx>
• Re: Does mdadm --create harm existing data?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Does mdadm --create harm existing data?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: building a disk server
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: Bill Davidsen <davidsen@xxxxxxx>
• what does this mean: ioctl lock interrupted
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: RAID0 performance question
  • From: Al Boldi <a1426z@xxxxxxxxx>
• is it possible to change the UUID of an array?
  • From: Adam Nevins <univac@xxxxxxxxxxx>
• Re: need help with raid6 recovery
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: ATAn timeout errors
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: need help with raid6 recovery
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Please help with reconstruction of RAID 5
  • From: Mats Johnson <mats@xxxxxxx>
• Re: Data errors on clean, degraded Raid5. Help Please.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Data errors on clean, degraded Raid5. Help Please.
  • From: Erich Newell <erich.newell@xxxxxxxxx>
• Re: Data errors on clean, degraded Raid5. Help Please.
  • From: Neil Brown <neilb@xxxxxxx>
• Data errors on clean, degraded Raid5. Help Please.
  • From: Erich Newell <erich.newell@xxxxxxxxx>
• Re: quick Q re raid reconstruction
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: quick Q re raid reconstruction
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 010 of 14] Convert various kmap calls to kmap_atomic
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md 008 of 14] Convert md to use kzalloc throughout
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: quick Q re raid reconstruction
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: [PATCH md 006 of 14] Make /proc/mdstat pollable.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md 002 of 14] Allow raid1 to check consistency
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: quick Q re raid reconstruction
  • From: Neil Brown <neilb@xxxxxxx>
• Re: /proc/mdstat bug: 2.6.14.2
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: quick Q re raid reconstruction
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: Jure Pečar <pegasus@xxxxxxxxxxx>
• Re: /proc/mdstat bug: 2.6.14.2
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Failed Recovery - Errors in Degraded Mode
  • From: Erich Newell <erich.newell@xxxxxxxxx>
• quick Q re raid reconstruction
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: What is the status of the raid5 online resize patch ?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: What is the status of the raid5 online resize patch ?
  • From: Francois Barre <francois.barre@xxxxxxxxx>
• Re: What is the status of the raid5 online resize patch ?
  • From: Neil Brown <neilb@xxxxxxx>
• What is the status of the raid5 online resize patch ?
  • From: Francois Barre <francois.barre@xxxxxxxxx>
• Re: Journal-guided Resynchronization for Software RAID
  • From: Neil Brown <neilb@xxxxxxx>
• Re: building a disk server
  • From: Sebastian Kuzminsky <seb.kuzminsky@xxxxxxxxx>
• [PATCH md 014 of 14] Fix possible problem in raid1/raid10 error overwriting.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 013 of 14] Remove personality numbering from md.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 012 of 14] Break out of a loop that doesn't need to run to completion.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 011 of 14] Convert recently exported symbol to GPL
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 010 of 14] Convert various kmap calls to kmap_atomic
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 009 of 14] Tidy up raid5/6 hash table code.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 008 of 14] Convert md to use kzalloc throughout
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 007 of 14] Clean up 'page' related names in md
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 006 of 14] Make /proc/mdstat pollable.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 14] auto-correct correctable read errors in raid10
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 005 of 14] raid10 read-error handling - resync and read-only
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 14] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 14] Make sure read error on last working drive of raid1 actually returns failure.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 14] Allow raid1 to check consistency
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 14] Support check-without-repair of raid10 arrays
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH md 013 of 18] Improve handing of read errors with raid6
  • From: Neil Brown <neilb@xxxxxxx>
• need help with raid6 recovery
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: /proc/mdstat bug: 2.6.14.2
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: [PATCH md 013 of 18] Improve handing of read errors with raid6
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Journal-guided Resynchronization for Software RAID
  • From: "Timothy E. Denehy" <tedenehy@xxxxxxxxxxx>
• Re: Linux Raid boot - stuck in a raid start loop - Advice
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Linux Raid boot - stuck in a raid start loop - Advice
  • From: Matt Darcy <kernel-lists@xxxxxxxxxxxxxxxxx>
• md workings, new raid
  • From: Burton Rosenberg <burt@xxxxxxxxxxxx>
• RE: /proc/mdstat bug: 2.6.14.2
  • From: "Callahan, Tom" <CallahanT@xxxxxxxxxx>
• Re: /proc/mdstat bug: 2.6.14.2
  • From: Neil Brown <neilb@xxxxxxx>
• Re: building a disk server
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: [PATCH md 014 of 18] Attempt to auto-correct read errors in raid1.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: building a disk server
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: building a disk server
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• /proc/mdstat bug: 2.6.14.2
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: building a disk server
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: building a disk server
  • From: Sebastian Kuzminsky <seb.kuzminsky@xxxxxxxxx>
• Re: [PATCH md 014 of 18] Attempt to auto-correct read errors in raid1.
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: building a disk server
  • From: Lajber Zoltan <lajbi@xxxxxxxxxxxx>
• Re: building a disk server
  • From: Brad Dameron <brad@xxxxxxxxxx>
• building a disk server
  • From: Sebastian Kuzminsky <seb.kuzminsky@xxxxxxxxx>
• Promise sx4100 (PDC20621) with sata_sx4
  • From: "Jan Reiter" <The-Fallen@xxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: [PATCH] Fix for "Booting from raid1 -- md: invalid raid superblock mag"
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• [PATCH md 018 of 18] Fix up some rdev rcu locking in raid5/6
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 017 of 18] Handle errors when read-only
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 015 of 18] Tidyup some issues with raid1 resync and prepare for catching read errors.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 016 of 18] Better handling for read error in raid1 during resync
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 014 of 18] Attempt to auto-correct read errors in raid1.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 008 of 18] Small cleanups for raid5
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 010 of 18] Move bitmap_create to after md array has been initialised.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 013 of 18] Improve handing of read errors with raid6
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 012 of 18] Fix raid6 resync check/repair code.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 011 of 18] Write intent bitmap support for raid10
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 009 of 18] Allow dirty raid[456] arrays to be started at boot.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 006 of 18] Improve raid1 "IO Barrier" concept.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 007 of 18] Improve raid10 "IO Barrier" concept.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 18] Fix locking problem in r5/r6
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 18] Improve read speed to raid10 arrays using 'far copies'.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 005 of 18] Fix --re-add for raid1 and raid6
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 18] Fix problem with raid6 intent bitmap
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 18] Set default_bitmap_offset properly in set_array_info
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 18] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH] Fix for "Booting from raid1 -- md: invalid raid superblock mag"
  • From: Raphaël Rigo <raphael.rigo@xxxxxxxxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: Al Boldi <a1426z@xxxxxxxxx>
• DeviceDisappeared events on reboot
  • From: Trevor Cordes <trevor@xxxxxxxxxxxxx>
• Re: mdadm HOWTO
  • From: Andreas Haumer <andreas@xxxxxxxxx>
• mdadm HOWTO
  • From: Mike Smith <easygreenus@xxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID0 performance question
  • From: Lajber Zoltan <lajbi@xxxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: Lajber Zoltan <lajbi@xxxxxxxxxxxx>
• Booting from raid1 -- md: invalid raid superblock magic on sdb1
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: RAID0 performance question
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• RAID0 performance question
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• mdadm: What does "Failed devices : -1" mean ?
  • From: Ivor Joseph Dvorecky <ivorjoseph@xxxxxxxxxxxx>
• Re: mdadm 2.1: command line option parsing bug?
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: mdadm 2.1: command line option parsing bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm 2.1: command line option parsing bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Poor Software RAID-0 performance with 2.6.14.2
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: mdadm 2.1: command line option parsing bug?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Poor Software RAID-0 performance with 2.6.14.2
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: Poor Software RAID-0 performance with 2.6.14.2
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: mdadm 2.1: command line option parsing bug?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: mdadm 2.1: command line option parsing bug?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: mdadm upgrade easy or brain surgery?
  • From: Neil Brown <neilb@xxxxxxx>
• mdadm upgrade easy or brain surgery?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: mdadm 2.1: command line option parsing bug?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: comparing FreeBSD to linux
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• RE: comparing FreeBSD to linux
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: Adding Reed-Solomon Personality to MD, need help/advice
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Crooked raid [solved]
  • From: Guillaume Filion <gfk@xxxxxxxxxxx>
• RE: comparing FreeBSD to linux
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: raid5 write performance
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 write performance
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: Recovering a 4-disk RAID5 array from 2 clean disks and 2 spares
  • From: Remi Broemeling <rbroemeling@xxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: comparing FreeBSD to linux
  • From: Lajber Zoltan <lajbi@xxxxxxxxxxxx>
• comparing FreeBSD to linux
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Recovering a 4-disk RAID5 array from 2 clean disks and 2 spares
  • From: Remi Broemeling <rbroemeling@xxxxxxxxx>
• RE: raid5 reliability (was raid5 write performance)
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: no reconstruction in 2.6.14.2?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: no reconstruction in 2.6.14.2?
  • From: Mike Hardy <mhardy@xxxxxxx>
• no reconstruction in 2.6.14.2?
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: raid5 write performance
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• raid5 reliability (was raid5 write performance)
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: raid5 write performance
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• RE: raid5 write performance
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: raid5 write performance
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 write performance
  • From: Mike Hardy <mhardy@xxxxxxx>
• RE: raid5 write performance
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• mdadm 2.1: command line option parsing bug?
  • From: Andreas Haumer <andreas@xxxxxxxxx>
• Re: raid5 write performance
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: raid5 write performance
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• raid5 write performance
  • From: Jure Pečar <pegasus@xxxxxxxxxxx>
• Re: [PATCH md 002 of 2] Make md threads interruptible again.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: raidtools-1.00.3-234 bug report
  • From: "d binderman" <dcb314@xxxxxxxxxxx>
• Re: raidtools-1.00.3-234 bug report
  • From: Neil Brown <neilb@xxxxxxx>
• raidtools-1.00.3-234 bug report
  • From: "d binderman" <dcb314@xxxxxxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH md ] Fix is_mddev_idle calculation now that disk/sector accounting happens when request completes.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Crooked raid
  • From: Guillaume Filion <gfk@xxxxxxxxxxx>
• Re: RAID-6
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• RAID-6
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: udev and mdadm -- I'm lost
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Crooked raid
  • From: Guillaume Filion <gfk@xxxxxxxxxxx>
• Re: Crooked raid
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Crooked raid
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Crooked raid
  • From: Guillaume Filion <gfk@xxxxxxxxxxx>
• Re: 3-disk RAID1 - only two disks active
  • From: Ville Herva <vherva@xxxxxxxxxx>
• Re: HELP 13 disk raid 5 not starting
  • From: "Jim Buttafuoco" <jim@xxxxxxxxxxxxxx>
• Re: HELP 13 disk raid 5 not starting
  • From: "Jim Buttafuoco" <jim@xxxxxxxxxxxxxx>
• Re: HELP 13 disk raid 5 not starting
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: Crooked raid
  • From: Guillaume Filion <gfk@xxxxxxxxxxx>
• Re: HELP 13 disk raid 5 not starting
  • From: "Jim Buttafuoco" <jim@xxxxxxxxxxxxxx>
• Re: HELP 13 disk raid 5 not starting
  • From: Neil Brown <neilb@xxxxxxx>
• Re: High system load on 2.6.15-r1 & software raid
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Crooked raid
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Autostart RAID1 on boot
  • From: Spencer Tuttle <rodeojones@xxxxxxxxxxx>
• Re: 3-disk RAID1 - only two disks active
  • From: Neil Brown <neilb@xxxxxxx>
• HELP 13 disk raid 5 not starting
  • From: "Jim Buttafuoco" <jim@xxxxxxxxxxxxxx>
• Re: Crooked raid
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• High system load on 2.6.15-r1 & software raid
  • From: Frido Ferdinand <frido@xxxxxxxxxx>
• Re: Autostart RAID1 on boot
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: [PATCH md 000 of 2] Introduction
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Autostart RAID1 on boot
  • From: Spencer Tuttle <rodeojones@xxxxxxxxxxx>
• Crooked raid
  • From: Guillaume Filion <gfk@xxxxxxxxxxx>
• Re: help!
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• 3-disk RAID1 - only two disks active
  • From: vherva@xxxxxxxxxxxxxxxxx
• Re: raid5 recovery fails
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 recovery fails
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: [PATCH md 002 of 2] Make md threads interruptible again.
  • From: Andrew Morton <akpm@xxxxxxxx>
• [PATCH md 002 of 2] Make md threads interruptible again.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 2] Mark START_ARRAY deprecated with a date.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 2] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid5 recovery fails
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• raid5 recovery fails
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: help!
  • From: Shane Bishop <sbishop@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: help!
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• help!
  • From: Shane Bishop <sbishop@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] minor bugfix in expected_spares logic
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• [PATCH] syslog support for monitor mode
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• [PATCH] add text message mode for terse reports
  • From: ross@xxxxxxxxxxxxxxxxx (Ross Vandegrift)
• Re: questions about ext3, raid-5, small files and wasted disk space
  • From: Neil Brown <neilb@xxxxxxx>
• Re: questions about ext3, raid-5, small files and wasted disk space
  • From: "kyle" <kylewong@xxxxxxxxxx>
• Re: Raid-6 Rebuild question
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid-6 Rebuild question
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Raid-6 Rebuild question
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Unable to compile mdadm-2.1 in IA64 enviroment
  • From: Krzysztof Oledzki <olel@xxxxxx>
• Re: questions about ext3, raid-5, small files and wasted disk space
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: questions about ext3, raid-5, small files and wasted disk space
  • From: Neil Brown <neilb@xxxxxxx>
• Re: doubts about intent-logging
  • From: Neil Brown <neilb@xxxxxxx>
• Re: /boot on RAID5 with GRUB
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: /boot on RAID5 with GRUB
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Re: /boot on RAID5 with GRUB
  • From: berk walker <berk@xxxxxxxxx>
• /boot on RAID5 with GRUB
  • From: Spencer Tuttle <rodeojones@xxxxxxxxxxx>
• [ANNOUNCE] multipath-tools-0.4.6
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxx>
• questions about ext3, raid-5, small files and wasted disk space
  • From: "kyle" <kylewong@xxxxxxxxxx>
• Re: New raid5 took 5 days for initial build on spare drive
  • From: Spencer Tuttle <rodeojones@xxxxxxxxxxx>
• doubts about intent-logging
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: Still Need Help on mdadm and udev
  • From: Andy Liebman <AndyLiebman@xxxxxxxxxxxxx>
• Re: Still Need Help on mdadm and udev
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: Still Need Help on mdadm and udev
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Re: Still Need Help on mdadm and udev
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH] proactive raid5 disk replacement, 2.6.14
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: how to understand this bitmap_zero
  • From: Neil Brown <neilb@xxxxxxx>
• Re: intent-logging, not synchronizing written blocks?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: New raid5 took 5 days for initial build on spare drive
  • From: Spencer Tuttle <rodeojones+Postfix@xxxxxxxxxxx>
• Re: Replacement disk is slightly smaller
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: how to understand this bitmap_zero
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• New raid5 took 5 days for initial build on spare drive
  • From: "Spencer Tuttle" <rodeojones@xxxxxxxxxxx>
• Re: intent-logging, not synchronizing written blocks?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: how to understand this bitmap_zero
  • From: Neil Brown <neilb@xxxxxxx>
• intent-logging, not synchronizing written blocks?
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: Still Need Help on mdadm and udev
  • From: andyliebman@xxxxxxxxxxxxx
• Still Need Help on mdadm and udev
  • From: andyliebman@xxxxxxxxxxxxx
• how to understand this bitmap_zero
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: "md: could not lock unknown-block" error with two RAID1s, two disks
  • From: "Thomas F. O'Connell" <tfo@xxxxxxxxxxxx>
• "md: could not lock unknown-block" error with two RAID1s, two disks
  • From: "Thomas F. O'Connell" <tfo@xxxxxxxxxxxx>
• Re: udev and mdadm -- I'm lost
  • From: Konstantin Olchanski <olchansk@xxxxxxxxxxxxx>
• Re: Replacement disk is slightly smaller
  • From: Neil Brown <neilb@xxxxxxx>
• Replacement disk is slightly smaller
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: udev and mdadm -- I'm lost
  • From: AndyLiebman@xxxxxxx
• Re: udev and mdadm -- I'm lost
  • From: Dave Jiang <djiang@xxxxxxxxxx>
• Re: udev and mdadm -- I'm lost
  • From: Sandro Dentella <sandro@xxxxxxxx>
• udev and mdadm -- I'm lost
  • From: AndyLiebman@xxxxxxx
• Re: RAID 5 array keeps dropping drive on boot
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Troels Bang Jensen <marvin@xxxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Troels Bang Jensen <marvin@xxxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Troels Bang Jensen <marvin@xxxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Troels Bang Jensen <marvin@xxxxxxxx>
• Re: RAID 5 array keeps dropping drive on boot
  • From: Neil Brown <neilb@xxxxxxx>
• RAID 5 array keeps dropping drive on boot
  • From: Troels Bang Jensen <marvin@xxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Weird fdisk -l output
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• Weird fdisk -l output
  • From: Derek Yeung <dky@xxxxxxxxxxxxxxxx>
• Re: [fwd: ECC circuitry error / md weirdness?]
  • From: PinkFreud <pf-raid20051104@xxxxxxxxxxxx>
• Re: [fwd: ECC circuitry error / md weirdness?]
  • From: Neil Brown <neilb@xxxxxxx>
• [fwd: ECC circuitry error / md weirdness?]
  • From: PinkFreud <pf-raid20051104@xxxxxxxxxxxx>
• Re: still a boot issue
  • From: Forrest Taylor <ftaylor@xxxxxxxxxx>
• still a boot issue
  • From: Peter Lauda <plauda@xxxxxxxx>
• Re: Oopsing with md in 2.6.14-rc5-mm1
  • From: Neil Brown <neilb@xxxxxxx>
• Oopsing with md in 2.6.14-rc5-mm1
  • From: Reuben Farrelly <reuben-lkml@xxxxxxxx>
• kernel panic reading root disk (s/w raid0)
  • From: Don Feliciano <don.feliciano@xxxxxxxxxx>
• raid-1 without marking partition as type "fd"
  • From: Hari Bhaskaran <hbhaskaran@xxxxxxxxx>
• Re: [PATCH md 010 of 10] Document sysfs usage of md, and make a couple of small refinements.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH md 009 of 10] Improve 'scan_mode' and rename it to 'sync_action'
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH md 001 of 10] Make sure /block link in /sys/.../md/ goes to correct devices.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH md 004 of 10] Fix some locking and module refcounting issues with md's use of sysfs.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH md 005 of 10] Split off some md attributes in sysfs to a separate group.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: raid0 fail to detect drive failure
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: raid5 two disk failure
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH md 010 of 10] Document sysfs usage of md, and make a couple of small refinements.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 009 of 10] Improve 'scan_mode' and rename it to 'sync_action'
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 008 of 10] Complete conversion of md to use kthreads.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 006 of 10] Only try to print recovery/resync status for personalities that support recovery
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 007 of 10] Ignore auto-readonly flag for arrays where it isn't meaningful.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 005 of 10] Split off some md attributes in sysfs to a separate group.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 10] Fix some locking and module refcounting issues with md's use of sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 10] Make manual repair work for raid1.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 10] Make sure /block link in /sys/.../md/ goes to correct devices.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 10] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 10] Make sure a user-request sync of raid5 ignores intent bitmap
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid0 fail to detect drive failure
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• DS4000 Storage Server (Engenio based) Management Protocol Analyzer
  • From: info@xxxxxxxxxxxx
• raid5 two disk failure
  • From: Meik Nienaber <usenet@xxxxxxxxxxxxxxxx>
• raid0 fail to detect drive failure
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: s/w raid and bios renumbering HDs
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: s/w raid and bios renumbering HDs
  • From: Hari Bhaskaran <hbhaskaran@xxxxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: Neil Brown <neilb@xxxxxxx>
• Re: s/w raid and bios renumbering HDs
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• RE: s/w raid and bios renumbering HDs
  • From: "Callahan, Tom" <CallahanT@xxxxxxxxxx>
• s/w raid and bios renumbering HDs
  • From: Hari Bhaskaran <hbhaskaran@xxxxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 000 of 2] Introduction
  • From: Andrew Morton <akpm@xxxxxxxx>
• [PATCH md 001 of 2] Remove attempt to use dynamic names in sysfs for component devices on an MD array.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 2] Allow md arrays to be started read-only (module parameter).
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 2] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: Superblock updates to failed spare
  • From: Sean Puttergill <puttergi@xxxxxxxx>
• Re: Superblock updates to failed spare
  • From: Neil Brown <neilb@xxxxxxx>
• Superblock updates to failed spare
  • From: Sean Puttergill <puttergi@xxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: split RAID1 during backups?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re[2]: split RAID1 during backups?
  • From: Rainer Fuegenstein <rfu@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: Flappy hotswap disks?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Flappy hotswap disks?
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Flappy hotswap disks?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Thomas Garner <tlg1466@xxxxxxxxxxxx>
• [PATCH] Make sure mdthreads will always respond to kthread_stop
  • From: NeilBrown <neilb@xxxxxxx>
• Re: split RAID1 during backups?
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: split RAID1 during backups?
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Bill Davidsen <tmrbill@xxxxxxx>
• Re: split RAID1 during backups?
  • From: dean gaudet <dean-list-linux-raid@xxxxxxxxxx>
• Re: mdadm 2.0 and 2.1 compile error
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: split RAID1 during backups?
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: split RAID1 during backups?
  • From: "Jurriaan Kalkman" <jurriaan@xxxxxxxxxxxxxxxxxxxxxx>
• split RAID1 during backups?
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: how to add third drive to RAID1 made of two drives without destroying data
  • From: Juraj Holtak <juraj@xxxxxxxxxx>
• Re: how to add third drive to RAID1 made of two drives without destroying data
  • From: Chase Venters <chase.venters@xxxxxxxxxxxx>
• how to add third drive to RAID1 made of two drives without destroying data
  • From: Juraj Holtak <juraj@xxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: raid'ing problems
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: raid'ing problems
  • From: Andy Dawson <A.J.Dawson@xxxxxxxxxxxxxx>
• raid'ing problems
  • From: Peter Lauda <plauda@xxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Make SCSI disks work again?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• [PATCH-STABLE] Fix data-corruption bug in md when delayed recovery is interrupted.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm-2.1-1.i386.rpm and linux-gate.so.1
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: mdadm-2.1-1.i386.rpm and linux-gate.so.1
  • From: berk walker <berk@xxxxxxxxx>
• Re: RAID-5 or RAID-6 with mdadm 1.9.0-4 and 2.6.11.9
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: [PATCH md 000 of 8] Introduction
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• [PATCH md ] Three one-liners in md.c
  • From: NeilBrown <neilb@xxxxxxx>
• RAID-5 or RAID-6 with mdadm 1.9.0-4 and 2.6.11.9
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: [PATCH md 000 of 8] Introduction
  • From: "George Iosif" <giosif@xxxxxx>
• Diff between 2.4 and 2.6 kernels for raid
  • From: "Paul Aviles" <paul.aviles@xxxxxxxxx>
• Re: [PATCH md 000 of 8] Introduction
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Patch: kernel crash while trying to mount XFS on a failed-to-start raid5 array
  • From: Bo Yang <byang@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 000 of 8] Introduction
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Lajber Zoltan <lajbi@xxxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID 6 corruption : please help!
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: All disks in the array suddenly non-fresh??
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: 2.4 and --grow?
  • From: Neil Brown <neilb@xxxxxxx>
• 2.4 and --grow?
  • From: "Carl Jones" <lists@xxxxxxxxxxxxx>
• [PATCH md 008 of 8] Support BIO_RW_BARRIER for md/raid1.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 007 of 8] Make md on-disk bitmaps not host-endian
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 006 of 8] Convert 'faulty' and 'in_sync' fields to bits in 'flags' field.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 8] Fix ref-counting problems with kobjects in md
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 005 of 8] Improvements to raid5 handling of read errors
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 8] Change raid5 sysfs attribute to not create a new directory.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 8] Minor MD fixes
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 8] Provide proper rcu_dereference / rcu_assign_pointer annotations in md
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 8] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• All disks in the array suddenly non-fresh??
  • From: Boris Shingarov <shingarov@xxxxxxxxxxxx>
• RAID
  • From: Makovecz Ádám <adam@xxxxxxxxxxx>
• Re: mdadm-2.1-1.i386.rpm and linux-gate.so.1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 003 of 5] Add kobject/sysfs support to raid5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH md 004 of 5] Allow a manual resync with md
  • From: Neil Brown <neilb@xxxxxxx>
• safe to test SATA array by pulling cables?
  • From: Harry Mangalam <hjm@xxxxxxxxx>
• Re: big fault :-)
  • From: Tim Walberg <twalberg@xxxxxxxxxxxxxx>
• Re: big fault :-)
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: GUI for mdadm
  • From: Erik Karlin <e_karlin@xxxxxxxxx>
• Re: big fault :-)
  • From: Karsten Römke <biermann-roemke@xxxxxxxxxxxxx>
• Re: big fault :-)
  • From: danci@xxxxxxxxx
• Re: Automatic drive partitioning
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• GUI for mdadm
  • From: James Neale <james@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH md 004 of 5] Allow a manual resync with md
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md 004 of 5] Allow a manual resync with md
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md 003 of 5] Add kobject/sysfs support to raid5
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md 002 of 5] Extend md sysfs support to component devices.
  • From: Andrew Morton <akpm@xxxxxxxx>
• big fault :-)
  • From: Karsten Römke <k.roemke@xxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Mattias Wadenstein <maswan@xxxxxxxxxx>
• mdadm-2.1-1.i386.rpm and linux-gate.so.1
  • From: berk walker <berk@xxxxxxxxx>
• softraid growing?
  • From: <drtyc@xxxxxxxxxx>
• Re: Automatic drive partitioning
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Automatic drive partitioning
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• RE: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: "Allen Martin" <AMartin@xxxxxxxxxx>
• Re: Automatic drive partitioning
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Automatic drive partitioning
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Andrew Walrond <andrew@xxxxxxxxxxx>
• unbalance?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Automatic drive partitioning
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: Automatic drive partitioning
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Andrew Walrond <andrew@xxxxxxxxxxx>
• Automatic drive partitioning
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Andrew Walrond <andrew@xxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Lukasz Kosewski <lkosewsk@xxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Andrew Walrond <andrew@xxxxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: RAID 6 corruption : please help!
  • From: Trevor Cordes <trevor@xxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: raid5 resize
  • From: "Andre' Breiler" <andre.breiler@xxxxxxxxxxx>
• Re: raid5 resize
  • From: Neil Brown <neilb@xxxxxxx>
• raid5 resize
  • From: "Andre' Breiler" <andre.breiler@xxxxxxxxxxx>
• Anybody know about nforce4 SATA II hot swapping + linux raid?
  • From: Andrew Walrond <andrew@xxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: bit-rot, crc errors, etc question
  • From: Mike Hardy <mhardy@xxxxxxx>
• bit-rot, crc errors, etc question
  • From: Michael Stumpf <mjstumpf@xxxxxxxxx>
• Re: RAID 6 corruption : please help!
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: RAID 6 corruption : please help!
  • From: Tyler <pml@xxxxxxxx>
• Re: RAID 6 corruption : please help!
  • From: Trevor Cordes <trevor@xxxxxxxxxxxxx>
• RAID 6 corruption : please help!
  • From: Trevor Cordes <trevor@xxxxxxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Andy Smith <andy@xxxxxxxxxx>
• ATAn timeout errors
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: Checking the sanity of SATA disks
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Checking the sanity of SATA disks
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: non-fresh drive?
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: maximum size
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• driver a320raid for kernel 2.4.21-3
  • From: Lukasz Razmuk <Lukasz.Razmuk@xxxxxxxxxx>
• [PATCH md 005 of 5] Teach raid5 the difference between 'check' and 'repair'.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 004 of 5] Allow a manual resync with md
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 003 of 5] Add kobject/sysfs support to raid5
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 002 of 5] Extend md sysfs support to component devices.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 001 of 5] Initial sysfs support for md
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH md 000 of 5] Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: non-fresh drive?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Convert RAID5 to RAID6?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: maximum size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Sebastian Kuzminsky <seb.kuzminsky@xxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: madadm man page ambiguities: '--size' units, superblock affordance
  • From: "Gordon Mohr (@ Bitzi)" <gojomo@xxxxxxxxx>
• Re: madadm man page ambiguities: '--size' units, superblock affordance
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: non-fresh drive?
  • From: Hank Barta <hbarta@xxxxxxxxx>
• non-fresh drive?
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Tyler <pml@xxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• madadm man page ambiguities: '--size' units, superblock affordance
  • From: "Gordon Mohr (@ Bitzi)" <gojomo@xxxxxxxxx>
• Re: Convert RAID5 to RAID6<--correction?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: Shrinking on-disk size of RAID1 array?
  • From: Gordon Mohr <gojomo@xxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Andy Smith <andy@xxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
• Convert RAID5 to RAID5?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Re: Best way to achieve large, expandable, cheap storage?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• Best way to achieve large, expandable, cheap storage?
  • From: Robin Bowes <robin-lists@xxxxxxxxxxxxxx>
• driver a320raid for kernel 2.4.21-3
  • From: lukaszr@xxxxxxxxxxxx (Lukasz Razmuk)
• Re: Shrinking on-disk size of RAID1 array?
  • From: Matthew Coulson <jmcoulson@xxxxxxxxx>
• Shrinking on-disk size of RAID1 array?
  • From: "Gordon Mohr (@ Bitzi)" <gojomo@xxxxxxxxx>
• RE: Where is the performance bottleneck?
  • From: dean gaudet <dean-list-linux-kernel@xxxxxxxxxx>
• RE: Where is the performance bottleneck?
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: still compile error
  • From: Jeff Hanson <jhanson@xxxxxxx>
• Wierd issue with hard-drive, unable to write to/change it
  • From: Tyler <pml@xxxxxxxx>
• Re: Where is the performance bottleneck?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: number of global spares?
  • From: Dan Stromberg <strombrg@xxxxxxxxxxxxxxx>
• Re: number of global spares?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: number of global spares?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: still compile error
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Re: number of global spares?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: still compile error
  • From: Jeff Hanson <jhanson@xxxxxxx>
• Re: mdadm 2.0 and 2.1 compile error
  • From: Jeff Hanson <jhanson@xxxxxxx>
• Re: maximum size
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: maximum size
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• Re: maximum size
  • From: Neil Brown <neilb@xxxxxxx>
• [Fwd: Multipath Tools.]
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Multipath Tools.
  • From: Brad Dameron <brad@xxxxxxxxxx>
• Re: maximum size
  • From: Brad Dameron <brad@xxxxxxxxxx>
• still compile error
  • From: Norman Schmidt <schmidt@xxxxxxx>
• which external disk enclosure?
  • From: Sebastian Kuzminsky <seb.kuzminsky@xxxxxxxxx>
• Re: maximum size
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: maximum size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: maximum size
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• maximum size
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: did I just destroy my data?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm 2.0 and 2.1 compile error
  • From: Neil Brown <neilb@xxxxxxx>
• did I just destroy my data?
  • From: Sebastian Kuzminsky <seb.kuzminsky@xxxxxxxxx>
• mdadm 2.0 and 2.1 compile error
  • From: Stephan van Hienen <raid@xxxxxxxx>
• new megaraid driver problem at Opteron (fwd)
  • From: Evgeny Rodichev <er@xxxxxxxxxx>
• Re: suggestions for SATA controllers (PCI-X or PCI-E), e.g. Highpoint,
  • From: linux@xxxxxxxxxxx
• Root RAID 1+0 micro-HOWTO
  • From: linux@xxxxxxxxxxx
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• mdadm 2.0 and 2.1 compile error
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Re: Software RAID1 problems
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Software RAID1 problems
  • From: Andy Dawson <A.J.Dawson@xxxxxxxxxxxxxx>
• Re: raid5 missing drive at boot question
  • From: Orion Poplawski <orion@xxxxxxxxxxxxx>
• *** Announcement: dmraid 1.0.0.rc9 ***
  • From: Heinz Mauelshagen <mauelshagen@xxxxxxxxxx>
• Re: mdadm core dump
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: mdadm core dump
  • From: Neil Brown <neilb@xxxxxxx>
• mdadm core dump
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: raid5 missing drive at boot question
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• raid5 missing drive at boot question
  • From: Orion Poplawski <orion@xxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: raid5 or raid6 and the maximum size
  • From: berk walker <berk@xxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 or raid6 and the maximum size
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• raid5 or raid6 and the maximum size
  • From: Farkas Levente <lfarkas@xxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Jamie Lokier <jamie@xxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Jamie Lokier <jamie@xxxxxxxxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: OOPS in raid10.c:1448 in vanilla 2.6.13.2
  • From: Guus Houtzager <guus@xxxxxxx>
• Setting NR_STRIPES high increases RAID5 performance
  • From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: OOPS in raid10.c:1448 in vanilla 2.6.13.2
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Fw: OOPS in raid10.c:1448 in vanilla 2.6.13.2
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Implementing Encryption and Decryption in Raid Device Driver.
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: "George N. White III" <aa056@xxxxxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH] Online RAID-5 resizing
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• [PATCH] Online RAID-5 resizing
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Read RAID1 drive member without 3ware RAID controller
  • From: Fabien Salvi <fabien.salvi@xxxxxxx>
• Re: Highpoint 1820A
  • From: "Greg Brackley" <greg.brackley-gmane@xxxxxxxxxxxxxxxxxxxx>
• Re: assembly aborted, superblock is missing. (need help!)
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: Highpoint 1820A
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: "Jonathan Schmidt" <jon@xxxxxxxxxxxxx>
• Re: raidreconf error (bug)
  • From: "Jonathan Schmidt" <jon@xxxxxxxxxxxxx>
• Re: raidreconf error (bug)
  • From: "Jonathan Schmidt" <jon@xxxxxxxxxxxxx>
• Re: Highpoint 1820A
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Re: suggestions for SATA controllers (PCI-X or PCI-E), e.g. Highpoint, wanted
  • From: Norman Schmidt <schmidt@xxxxxxx>
• Re: Good, recent FS comparison?
  • From: Matt Stegman <matts@xxxxxxx>
• assembly aborted, superblock is missing. (need help!)
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: suggestions for SATA controllers (PCI-X or PCI-E), e.g. Highpoint, wanted
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: Promise SATAII150 TX4 or raidreconf broken - answer
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: raidreconf error (bug)
  • From: Tyler <pml@xxxxxxxx>
• Re: suggestions for SATA controllers (PCI-X or PCI-E), e.g. Highpoint, wanted
  • From: Tyler <pml@xxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Tyler <pml@xxxxxxxx>
• Re: raidreconf error (bug)
  • From: Tyler <pml@xxxxxxxx>
• Re: Highpoint 1820A
  • From: Tyler <pml@xxxxxxxx>
• Re: Highpoint 1820A
  • From: Tyler <pml@xxxxxxxx>
• Re: Promise SATAII150 TX4 or raidreconf broken - answer
  • From: Tyler <pml@xxxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Frank Blendinger <fb@xxxxxxxxxxxxxxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Burkhard Carstens <suse-ml@xxxxxxxxxxxxx>
• Highpoint 1820A
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: raidreconf error (bug)
  • From: "Jonathan Schmidt" <jon@xxxxxxxxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Frank Blendinger <fb@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH md ] Better handling of readerrors with raid5.
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: Failed RAID-5 with 4 disks
  • From: Frank Blendinger <fb@xxxxxxxxxxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Tyler <pml@xxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• raidreconf error (bug)
  • From: "Jonathan Schmidt" <jon@xxxxxxxxxxxxx>
• Re: Good, recent FS comparison?
  • From: Tyler <pml@xxxxxxxx>
• [PATCH md ] Better handling of readerrors with raid5.
  • From: NeilBrown <neilb@xxxxxxx>
• Good, recent FS comparison?
  • From: Ewan Grantham <ewan.grantham@xxxxxxxxx>
• Re: Implementing Encryption and Decryption in Raid Device Driver.
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Implementing Encryption and Decryption in Raid Device Driver.
  • From: vinnakota chaitanya <chaitanyaa_v@xxxxxxxxx>
• Re: RAID6 on PowerPC is faulty
  • From: Neil Brown <neilb@xxxxxxx>
• RAID6 on PowerPC is faulty
  • From: hpa@xxxxxxxxx (H. Peter Anvin)
• Re: Implementing Encryption and Decryption in Raid Device Driver.
  • From: Molle Bestefich <molle.bestefich@xxxxxxxxx>
• Re: Implementing Encryption and Decryption in Raid Device Driver.
  • From: vinnakota chaitanya <chaitanyaa_v@xxxxxxxxx>
• Re: Implementing Encryption and Decryption in Raid Device Driver.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Implementing Encryption and Decryption in Raid Device Driver.
  • From: vinnakota chaitanya <chaitanyaa_v@xxxxxxxxx>
• Re: Promise SATAII150 TX4 or raidreconf broken - answer
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>