Linux RAID Storage Date Index

Thread Index

Re: raid1 data corruption during resync
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
Re: ext4 vs btrfs performance on SSD array
- From: Austin S Hemmelgarn <ahferroin7@xxxxxxxxx>
Re: ext4 vs btrfs performance on SSD array
- From: Zack Coffey <clickwir@xxxxxxxxx>
Re: ext4 vs btrfs performance on SSD array
- From: "Theodore Ts'o" <tytso@xxxxxxx>
Re: [RFC]RAID5: batch adjacent full stripe write
- From: NeilBrown <neilb@xxxxxxx>
Re: ext4 vs btrfs performance on SSD array
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Converting RAID5 to RAID0
- From: Michael Muratet <muratetm@xxxxxxxxx>
Re: Converting RAID5 to RAID0
- From: NeilBrown <neilb@xxxxxxx>
Re: Converting RAID5 to RAID0
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
RAID6 rmw - new numbers
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Converting RAID5 to RAID0
- From: Mike Muratet <muratetm@xxxxxxxxx>
Re: Seeking help to get a failed RAID5 system back to life
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Seeking help to get a failed RAID5 system back to life
- From: Fabio Bacigalupo <info1@xxxxxxxxxxxx>
Installing CentOS7 on to MDADM RAID1 or RAID10
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Good hardware for mdadm
- From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Roberto Spadim <rspadim@xxxxxxxxx>
Re: Good hardware for mdadm
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Good hardware for mdadm
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: Good hardware for mdadm
- From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
[PATCH 1/1] Grow: Report when grow needs metadata update
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Good hardware for mdadm
- From: Roberto Spadim <rspadim@xxxxxxxxx>
Good hardware for mdadm
- From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
raid1 data corruption during resync
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
Re: Units for mdadm --data-offset ?
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Units for mdadm --data-offset ?
- From: "Patrick J. LoPresti" <lopresti@xxxxxxxxx>
Re: Seeking help to get a failed RAID5 system back to life
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Seeking help to get a failed RAID5 system back to life
- From: Fabio Bacigalupo <info1@xxxxxxxxxxxx>
Re: Seeking help to get a failed RAID5 system back to life
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
Mirroring seek optimization
- From: Robert Long <boblong@xxxxxxxxxxxxxx>
Failed drive in RAID10 using Intel IHC
- From: "Glen Whittenberg" <glenewhittenberg@xxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
Seeking help to get a failed RAID5 system back to life
- From: Fabio Bacigalupo <info1@xxxxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Add BBL to existing array
- From: Peter Hoeg <peter@xxxxxxxx>
Re: Add BBL to existing array
- From: NeilBrown <neilb@xxxxxxx>
Re: Add BBL to existing array
- From: Peter Hoeg <peter@xxxxxxxx>
Re: Add BBL to existing array
- From: NeilBrown <neilb@xxxxxxx>
Add BBL to existing array
- From: Peter Hoeg <peter@xxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: [PATCH] Memory leak once alloc superblock page failed
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: AW: [PATCH v3 5/6] md/raid5: activate raid6 rmw feature
- From: "John Stoffel" <john@xxxxxxxxxxx>
AW: [PATCH v3 5/6] md/raid5: activate raid6 rmw feature
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: [PATCH v3 5/6] md/raid5: activate raid6 rmw feature
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: RAID partitions, or RAID disks and partition array?
- From: David Brown <david.brown@xxxxxxxxxxxx>
[PATCH v3 6/6] md/raid5: introduce configuration option rmw_level
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v3 5/6] md/raid5: activate raid6 rmw feature
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v3 4/6] md/raid6 algorithms: xor_syndrome() for SSE2
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v3 3/6] md/raid6 algorithms: xor_syndrome() for generic int
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v3 2/6] md/raid6 algorithms: improve test program
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v3 1/6] md/raid6 algorithms: delta syndrome functions
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v3 0/6] md/raid6: support read-modify-write
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
RE: Shrinking number of devices on a RAID-10 (near 2) array
- From: Craig Curtin <craigc@xxxxxxxxxxxxx>
Re: Shrinking number of devices on a RAID-10 (near 2) array
- From: NeilBrown <neilb@xxxxxxx>
Re: Mirroring seek optimization
- From: NeilBrown <neilb@xxxxxxx>
Mirroring seek optimization
- From: Robert Long <boblong@xxxxxxxxxxxxxx>
Re: RAID partitions, or RAID disks and partition array?
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Shrinking number of devices on a RAID-10 (near 2) array
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: RAID partitions, or RAID disks and partition array?
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID partitions, or RAID disks and partition array?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: RAID partitions, or RAID disks and partition array?
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: RAID partitions, or RAID disks and partition array?
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
RAID partitions, or RAID disks and partition array?
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
ANNOUNCE: mdadm 3.3.2 - A tool for managing md Soft RAID under Linux
- From: NeilBrown <neilb@xxxxxxx>
AW: [PATCH v2 0/6] raid6: support read-modify-write
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: The parallel make patch for mdadm
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH v2 0/6] raid6: support read-modify-write
- From: NeilBrown <neilb@xxxxxxx>
Re: The parallel make patch for mdadm
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
performance degrade with RAID6 against RAID0
- From: "Mandar Joshi" <mandar.joshi@xxxxxxxxxxxxxx>
Re: Correct RAID options
- From: Chris Knipe <savage@xxxxxxxxxxxxx>
Re: [PATCH v1 0/0] raid5: fix init_stripe() inconsistencies
- From: NeilBrown <neilb@xxxxxxx>
AW: [PATCH v1 0/0] raid5: fix init_stripe() inconsistencies
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: Correct RAID options
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Correct RAID options
- From: Chris Schanzle <mdadm@xxxxxxxxxxxxxxxxx>
AW: [PATCH v2 0/6] raid6: support read-modify-write
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
RE: Correct RAID options
- From: Craig Curtin <craigc@xxxxxxxxxxxxx>
Re: [PATCH v1 0/0] raid5: fix init_stripe() inconsistencies
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] md: fix for wrong state in superblock issue in assemble process
- From: NeilBrown <neilb@xxxxxxx>
Re: Correct RAID options
- From: Chris Knipe <savage@xxxxxxxxxxxxx>
RE: Correct RAID options
- From: Craig Curtin <craigc@xxxxxxxxxxxxx>
Re: Correct RAID options
- From: Chris Knipe <savage@xxxxxxxxxxxxx>
Re: Correct RAID options
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: [PATCH v2 0/6] raid6: support read-modify-write
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: Correct RAID options
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
RE: Correct RAID options
- From: Craig Curtin <craigc@xxxxxxxxxxxxx>
Correct RAID options
- From: Chris Knipe <savage@xxxxxxxxxxxxx>
AW: [PATCH v1 0/8] raid6: support read-modify-write
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 6/6] raid5: introduce configuration option rmw_level
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 3/6] raid6 algorithms: xor_syndrome() for generic int
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 5/6] raid6: activate rmw feature
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 4/6] raid6 algorithms: xor_syndrome() for SSE2
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 2/6] raid6 algorithms: improve test program
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 1/6] raid6 algorithms: delta syndrome functions
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
[PATCH v2 0/6] raid6: support read-modify-write
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: Can I replace raid6 disk using dd?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Can I replace raid6 disk using dd?
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
[GIT PULL REQUEST] bugfixes for md.
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH v1 0/8] raid6: support read-modify-write
- From: NeilBrown <neilb@xxxxxxx>
Re: Can I replace raid6 disk using dd?
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: Full stripe write in RAID6
- From: NeilBrown <neilb@xxxxxxx>
Re: raid5.c internal stripe layout
- From: NeilBrown <neilb@xxxxxxx>
Re: Can I replace raid6 disk using dd?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Can I replace raid6 disk using dd?
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
Can I replace raid6 disk using dd?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
raid5.c internal stripe layout
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: ALERT: md/raid6 data corruption risk.
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Larkin Lowrey <llowrey@xxxxxxxxxxxxxxxxx>
RE: Full stripe write in RAID6
- From: "Mandar Joshi" <mandar.joshi@xxxxxxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
[RFC]RAID5: batch adjacent full stripe write
- From: Shaohua Li <shli@xxxxxxxxxx>
ALERT: md/raid6 data corruption risk.
- From: NeilBrown <neilb@xxxxxxx>
Re: memory leak with linux-3.14.16
- From: NeilBrown <neilb@xxxxxxx>
Re: memory leak with linux-3.14.16
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
Re: memory leak with linux-3.14.16
- From: NeilBrown <neilb@xxxxxxx>
Re: memory leak with linux-3.14.16
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
Re: memory leak with linux-3.14.16
- From: NeilBrown <neilb@xxxxxxx>
memory leak with linux-3.14.16
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
Re: RAID10-shrink does not work
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
Re: Unable to re-add a disk after a reboot.
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Unable to re-add a disk after a reboot.
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Unable to re-add a disk after a reboot.
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Unable to re-add a disk after a reboot.
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Unable to re-add a disk after a reboot.
- From: NeilBrown <neilb@xxxxxxx>
Unable to re-add a disk after a reboot.
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Larkin Lowrey <llowrey@xxxxxxxxxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Larkin Lowrey <llowrey@xxxxxxxxxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: How to use --freeze-reshape and is it safe?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: How to use --freeze-reshape and is it safe?
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
Re: How to use --freeze-reshape and is it safe?
- From: NeilBrown <neilb@xxxxxxx>
Re: Bigger stripe size
- From: NeilBrown <neilb@xxxxxxx>
AW: Bigger stripe size
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: How to use --freeze-reshape and is it safe?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Raid5 to raid6 reshape or recreate?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: How to use --freeze-reshape and is it safe?
- From: NeilBrown <neilb@xxxxxxx>
How to use --freeze-reshape and is it safe?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Bigger stripe size
- From: NeilBrown <neilb@xxxxxxx>
Re: Raid5 to raid6 reshape or recreate?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Raid5 to raid6 reshape or recreate?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: Raid5 to raid6 reshape or recreate?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
[PATCH v1 0/0] raid5: fix init_stripe() inconsistencies
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: Raid5 to raid6 reshape or recreate?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Raid5 to raid6 reshape or recreate?
- From: Ram Ramesh <rramesh2400@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: "Wilson, Jonathan" <piercing_male@xxxxxxxxxxx>
Re: RAID6 - RMW logic
- From: NeilBrown <neilb@xxxxxxx>
Re: Making spare device into active
- From: NeilBrown <neilb@xxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Can Jeuleers <can.jeuleers@xxxxxxxxx>
Re: Clone failed
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Larkin Lowrey <llowrey@xxxxxxxxxxxxxxxxx>
Re: Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Sleepy drives and MD RAID 6
- From: Adam Talbot <ajtalbot1@xxxxxxxxx>
Reads from write-mostly HDD instead from _non_ write-mostly SDD as expected?
- From: Mateusz Korniak <mateusz-lists@xxxxxxxxxxxxxx>
Re: Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
[GIT PULL REQUEST] md updates for 3.17
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID10-shrink does not work
- From: NeilBrown <neilb@xxxxxxx>
Re: Clone failed
- From: NeilBrown <neilb@xxxxxxx>
Clone failed
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: NeilBrown <neilb@xxxxxxx>
add vs. re-add
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
AW: RAID6 - RMW logic
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
RAID10-shrink does not work
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
[PATCH v1 8/8] raid6 algorithms: xor_syndrome() for SSE2
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 7/8] raid6 algorithms: xor_syndrome() for generic int
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 6/8] raid6: activate rmw feature
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 5/8] async_pq: add logic for improved rmw syndrome calculation
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 4/8] raid6 algorithms: show xor_syndrome() benchmarks on startup
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 3/8] raid6 algorithms: improve test program
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 2/8] raid6 algorithms: delta syndrome dummy functions
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 1/8] raid5: introduce configuration option rmw_level
- From: <stockhausen@xxxxxxxxxxx>
[PATCH v1 0/8] raid6: support read-modify-write
- From: <stockhausen@xxxxxxxxxxx>
Re: Making spare device into active
- From: Patrik Horník <patrik@xxxxxx>
Re: Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: NeilBrown <neilb@xxxxxxx>
Re: Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID10-reshape crashed due to memory allocation problem
- From: NeilBrown <neilb@xxxxxxx>
Re: Making spare device into active
- From: NeilBrown <neilb@xxxxxxx>
Mdadm misuse or bug ? mdadm: Cannot find 8:18: No such file or directory
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Making spare device into active
- From: Patrik Horník <patrik@xxxxxx>
Fwd: Making spare device into active
- From: Patrik Horník <patrik@xxxxxx>
parallel access to RAID10-array
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
parallel access to RAID10-array
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
RAID10-reshape crashed due to memory allocation problem
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
RAID10-reshape crashed due to memory allocation problem
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
Re: [PATCH] Recovery speed is wrong
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: After reshaping raid1 to raid0 with bitmap, then stop md panic
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: After reshaping raid1 to raid0 with bitmap, then stop md panic
- From: NeilBrown <neilb@xxxxxxx>
Add drives and restripe performance
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: RAID10-reshape crashed due to memory allocation problem
- From: NeilBrown <neilb@xxxxxxx>
Re: need expert advice for growing raid10-array
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Recovery speed is wrong
- From: NeilBrown <neilb@xxxxxxx>
RAID10-reshape crashed due to memory allocation problem
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
Re: Status of Tripe Parity RAID
- From: David Brown <david.brown@xxxxxxxxxxxx>
[PATCH] Recovery speed is wrong
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: After reshaping raid1 to raid0 with bitmap, then stop md panic
- From: NeilBrown <neilb@xxxxxxx>
Re: One patch just review the code
- From: NeilBrown <neilb@xxxxxxx>
Re: One patch just review the code
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: After reshaping raid1 to raid0 with bitmap, then stop md panic
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: Are we forced to use bad blocks list?
- From: NeilBrown <neilb@xxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re[3]: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
[PATCH] IMSM: do not use comma expression for simple assignments
- From: Jürg Billeter <j@xxxxxxxxx>
need expert advice for growing raid10-array
- From: mdraid.pkoch@xxxxxxxx (Peter Koch)
stray raid10 with 9 hdd with -n3 layout
- From: luvar@xxxxxxxxxxxx
Re: Full stripe write in RAID6
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: Full stripe write in RAID6
- From: NeilBrown <neilb@xxxxxxx>
Re: One patch just review the code
- From: NeilBrown <neilb@xxxxxxx>
Re: After reshaping raid1 to raid0 with bitmap, then stop md panic
- From: NeilBrown <neilb@xxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Full stripe write in RAID6
- From: "Mandar Joshi" <mandar.joshi@xxxxxxxxxxxxxx>
One patch just review the code
- From: Xiao Ni <xni@xxxxxxxxxx>
After reshaping raid1 to raid0 with bitmap, then stop md panic
- From: Xiao Ni <xni@xxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] V2 cast print arguments in super-ddf.c
- From: NeilBrown <neilb@xxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
[PATCH] V2 cast print arguments in super-ddf.c
- From: Michel Normand <normand@xxxxxxxxxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Re: Are we forced to use bad blocks list?
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
[PATCH] cast print arguments in super-ddf.c
- From: Michel Normand <normand@xxxxxxxxxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: NeilBrown <neilb@xxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Are we forced to use bad blocks list?
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 - RMW logic
- From: NeilBrown <neilb@xxxxxxx>
Re: Status of Tripe Parity RAID
- From: NeilBrown <neilb@xxxxxxx>
Re: [patch 1/2 v2]RAID5: make stripe size configurable
- From: NeilBrown <neilb@xxxxxxx>
Re: On URE and RAID rebuild - again!
- From: NeilBrown <neilb@xxxxxxx>
raid5: introduce rmw_level option
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Status of Tripe Parity RAID
- From: Ronny Egner <ronnyegner@xxxxxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/5] Add __designated_init, wrapping __attribute__((designated_init))
- From: josh@xxxxxxxxxxxxxxxx
Re: [PATCH 1/5] Add __designated_init, wrapping __attribute__((designated_init))
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/5] raid: Require designated initialization of structures
- From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
Re: [PATCH 2/5] raid: Require designated initialization of structures
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 1/5] Add __designated_init, wrapping __attribute__((designated_init))
- From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
[PATCH 2/5] raid: Require designated initialization of structures
- From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
[PATCH 3/5] fs: Require designated initialization of structures
- From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
[PATCH 4/5] ftrace: Require designated initialization of structures
- From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
[PATCH 5/5] include/linux/interrupt.h: Require designated initialization of structures
- From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
Re: [dm-devel] [PATCH] dm bufio: fully initialize shrinker
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
[PATCH] dm bufio: fully initialize shrinker
- From: Greg Thelen <gthelen@xxxxxxxxxx>
Are we forced to use bad blocks list?
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
AW: RAID6 - RMW logic
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: RAID6 - RMW logic
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 - RMW logic
- From: NeilBrown <neilb@xxxxxxx>
RAID6 - RMW logic
- From: Markus Stockhausen <stockhausen@xxxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Re: On URE and RAID rebuild - again!
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
On URE and RAID rebuild - again!
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
Re: [PATCH] md/raid1: always set MD_RECOVERY_INTR flag in raid1 error handler to avoid potential data corruption
- From: NeilBrown <neilb@xxxxxxx>
AW: Crash during recover
- From: "Matthias Appel" <appel.matthias@xxxxxxxxx>
Re: Crash during recover
- From: NeilBrown <neilb@xxxxxxx>
Crash during recover
- From: "Matthias Appel" <appel.matthias@xxxxxxxxx>
Re: [PATCH] md/raid1: always set MD_RECOVERY_INTR flag in raid1 error handler to avoid potential data corruption
- From: jiao hui <jiaohui@xxxxxxxxxxxxx>
Re: changing to fewer larger disks
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] md/raid1: always set MD_RECOVERY_INTR flag in raid1 error handler to avoid potential data corruption
- From: NeilBrown <neilb@xxxxxxx>
changing to fewer larger disks
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: [PATCH] md/raid1: always set MD_RECOVERY_INTR flag in raid1 error handler to avoid potential data corruption
- From: jiao hui <jiaohui@xxxxxxxxxxxxx>
[PATCH] md/raid1: always set MD_RECOVERY_INTR flag in raid1 error handler to avoid potential data corruption
- From: jiao hui <jiaohui@xxxxxxxxxxxxx>
Re: Fedora 20 RAID 6 errors on rebuild / check / repair
- From: George Rapp <george.rapp@xxxxxxxxx>
Re: udev 215 creates inactive MD devices upon stopping them
- From: NeilBrown <neilb@xxxxxxx>
Re: udev 215 creates inactive MD devices upon stopping them
- From: Kay Sievers <kay@xxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Fedora 20 RAID 6 errors on rebuild / check / repair
- From: George Rapp <george.rapp@xxxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Theophanis Kontogiannis <tkonto@xxxxxxxxx>
Re: udev 215 creates inactive MD devices upon stopping them
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Theophanis Kontogiannis <tkonto@xxxxxxxxx>
udev 215 creates inactive MD devices upon stopping them
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: /sys/block/md126 still exists even after stopping the array
- From: Artur Paszkiewicz <artur.paszkiewicz@xxxxxxxxx>
Re: /sys/block/md126 still exists even after stopping the array
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: Fedora 20 RAID 6 errors on rebuild / check / repair
- From: "Wilson, Jonathan" <piercing_male@xxxxxxxxxxx>
Re: Fedora 20 RAID 6 errors on rebuild / check / repair
- From: Kay Diederichs <kay.diederichs@xxxxxxxxxxxxxxx>
Fedora 20 RAID 6 errors on rebuild / check / repair
- From: George Rapp <george.rapp@xxxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Theophanis Kontogiannis <tkonto@xxxxxxxxx>
[patch 1/2 v2]RAID5: make stripe size configurable
- From: Shaohua Li <shli@xxxxxxxxxx>
[patch 2/2 v2]raid5: add a sysfs entry to change stripe size
- From: Shaohua Li <shli@xxxxxxxxxx>
Re: Problem with RAID-5 not adding disks
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Problem with RAID-5 not adding disks
- From: Theophanis Kontogiannis <tkonto@xxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: SOLVED Booting after Debian upgrade: /dev/md5 does not exist
- From: Ron Leach <ronleach@xxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Ron Leach <ronleach@xxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Ron Leach <ronleach@xxxxxxxxx>
The problem that trim is malfunction at the present of DM-layer
- From: Chia-Hung Chang <fredchang.tc@xxxxxxxxx>
Re: Booting after Debian upgrade: /dev/md5 does not exist
- From: Phil Turmel <philip@xxxxxxxxxx>
Booting after Debian upgrade: /dev/md5 does not exist
- From: Ron Leach <ronleach@xxxxxxxxx>
Re: Possible leak during reshaping layout
- From: Kenny Root <kenny@xxxxxxxxx>
RE: [PATCH] IMSM: move "validate_container_imsm" to be included in mdassemble
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Re: [PATCH] IMSM: move "validate_container_imsm" to be included in mdassemble
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
Re: Drive replace question
- From: NeilBrown <neilb@xxxxxxx>
Re: Possible leak during reshaping layout
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] IMSM: move "validate_container_imsm" to be included in mdassemble
- From: NeilBrown <neilb@xxxxxxx>
dm-cache-policy-mq.c
- From: Nick Krause <xerofoify@xxxxxxxxx>
Possible leak during reshaping layout
- From: Kenny Root <kenny@xxxxxxxxx>
Re: Two Questions about Linux MD
- From: NeilBrown <neilb@xxxxxxx>
Fwd: Re: Two Questions about Linux MD
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: Two Questions about Linux MD
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
RE: [REGRESSION] mdadm git fails to compile with "make mdassemble" after 0c21b485e4beb7bcfe631412a231f7c1ea1067bc
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
[PATCH] IMSM: move "validate_container_imsm" to be included in mdassemble
- From: Pawel Baldysiak <pawel.baldysiak@xxxxxxxxx>
Two Questions about Linux MD
- From: Henry Cai <henryplusplus@xxxxxxxxx>
[REGRESSION] mdadm git fails to compile with "make mdassemble" after 0c21b485e4beb7bcfe631412a231f7c1ea1067bc
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
Re: [PATCH] Parallel make bug in Makefile of mdadm-3.3.1 (corrupted udev rules and/or systemd services)
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
Re: Unable to reduce raid size.
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: Unable to reduce raid size.
- From: NeilBrown <neilb@xxxxxxx>
Re: Unable to reduce raid size.
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: Unable to reduce raid size.
- From: NeilBrown <neilb@xxxxxxx>
Unable to reduce raid size.
- From: Killian De Volder <killian.de.volder@xxxxxxxxxxx>
Re: [PATCH] Parallel make bug in Makefile of mdadm-3.3.1 (corrupted udev rules and/or systemd services)
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
Re: [PATCH] Parallel make bug in Makefile of mdadm-3.3.1 (corrupted udev rules and/or systemd services)
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Parallel make bug in Makefile of mdadm-3.3.1 (corrupted udev rules and/or systemd services)
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
[PATCH] Parallel make bug in Makefile of mdadm-3.3.1 (corrupted udev rules and/or systemd services)
- From: Samuli Suominen <ssuominen@xxxxxxxxxx>
Re: [PATCH] Grow: Do not try to restart if reshape is running
- From: NeilBrown <neilb@xxxxxxx>
[patch 1/1] raid0: prevent unaligned discard requests
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
[PATCH] Grow: Do not try to restart if reshape is running
- From: Pawel Baldysiak <pawel.baldysiak@xxxxxxxxx>
re: raid5: offload stripe handle to workqueue
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: How to fix this superblock?
- From: Pete <psid@xxxxxxxxxxxxxxxx>
Re: Identify actual drives/partitions behind RAID
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Identify actual drives/partitions behind RAID
- From: Sachin Garg <sgarg.bugreporter@xxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Vlad Dobrotescu <vlad@xxxxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Vlad Dobrotescu <vlad@xxxxxxxxxxxxx>
Re: Fwd: Recovering RAID5 array from multiple disk failure with different partition sizes
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Vlad Dobrotescu <vlad@xxxxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: Partitioning on top of raid mirror device questions.
- From: "Wilson, Jonathan" <i400s@xxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Vlad Dobrotescu <vlad@xxxxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Vlad Dobrotescu <vlad@xxxxxxxxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
RAID6 questions (mdadm 3.2.6/3.3.x)
- From: Vlad Dobrotescu <vlad@xxxxxxxxxxxxx>
Drive replace question
- From: Wakko Warner <wakko@xxxxxxxxxxxx>
Re: Partitioning on top of raid mirror device questions.
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Fwd: Recovering RAID5 array from multiple disk failure with different partition sizes
- From: Florian Spickenreither <florian.spickenreither@xxxxxxxxx>
Re: [patch 1/2]RAID5: make stripe size configurable
- From: Shaohua Li <shli@xxxxxxxxxx>
Re: Partitioning on top of raid mirror device questions.
- From: Phil Turmel <philip@xxxxxxxxxx>
Partitioning on top of raid mirror device questions.
- From: Wilson Jonathan <i400s@xxxxxxxxxxx>
Re: [patch 1/2]RAID5: make stripe size configurable
- From: NeilBrown <neilb@xxxxxxx>
Re: no automatic resync after device disconnect then reconnect
- From: NeilBrown <neilb@xxxxxxx>
Re: no automatic resync after device disconnect then reconnect
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: no automatic resync after device disconnect then reconnect
- From: NeilBrown <neilb@xxxxxxx>
Re: no automatic resync after device disconnect then reconnect
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
no automatic resync after device disconnect then reconnect
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: dm: fix an error code in local_init()
- From: Mike Snitzer <snitzer@xxxxxxxxxx>
[patch] dm: fix an error code in local_init()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: [PATCH] Forbid merging with partially assembled IMSM array
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Grow: Do not use grow-continue unit file if reshape is starting
- From: NeilBrown <neilb@xxxxxxx>
[patch 2/2]raid5: add a sysfs entry to change stripe size
- From: Shaohua Li <shli@xxxxxxxxxx>
[patch 1/2]RAID5: make stripe size configurable
- From: Shaohua Li <shli@xxxxxxxxxx>
RE: [PATCH] Grow: Do not use grow-continue unit file if reshape is starting
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Re: Re[6]: RAID 6 crashes system when being accessed
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: [PATCH] Grow: Do not use grow-continue unit file if reshape is starting
- From: NeilBrown <neilb@xxxxxxx>
Re[6]: RAID 6 crashes system when being accessed
- From: "Justin Stephenson" <justin@xxxxxxxxxxxxxxxxx>
RE: Poor performance with raid 0 with 2 devices at partition level
- From: Stephen Thomas <scjthm@xxxxxxxx>
Poor performance with raid 0 with 2 devices at partition level
- From: Stephen Thomas <scjthm@xxxxxxxx>
Re: Re[4]: RAID 6 crashes system when being accessed
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re[4]: RAID 6 crashes system when being accessed
- From: "Justin Stephenson" <justin@xxxxxxxxxxxxxxxxx>
Re: Re[2]: RAID 6 crashes system when being accessed
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re[2]: RAID 6 crashes system when being accessed
- From: "Justin Stephenson" <justin@xxxxxxxxxxxxxxxxx>
Showing my appreciation for your past effort-kindly claim your ATM CARD !!
- From: Andre Lampard <alampard03@xxxxxxxxx>
Re: RAID 6 crashes system when being accessed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
RAID 6 crashes system when being accessed
- From: "Justin Stephenson" <justin@xxxxxxxxxxxxxxxxx>
[PATCH] Grow: Do not use grow-continue unit file if reshape is starting
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
[GIT PULL REQUEST] two minor bugfixes for md in 3.16.
- From: NeilBrown <neilb@xxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: PATCH: RAID10-layout-descriptions
- From: keld@xxxxxxxxxx
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: PATCH: RAID10-layout-descriptions
- From: NeilBrown <neilb@xxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: NeilBrown <neilb@xxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Fwd: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Ethan Wilson <ethan.wilson@xxxxxxxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Lars Täuber <taeuber@xxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: NeilBrown <neilb@xxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: strange problem with raid6 read errors on active non-degraded array
- From: Roman Mamedov <rm@xxxxxxxxxxx>
strange problem with raid6 read errors on active non-degraded array
- From: Pedro Teixeira <finas@xxxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: Bill <billstuff2001@xxxxxxxxxxxxx>
RE: [PATCH] Forbid merging with partially assembled IMSM array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Re: [dm-devel] [PATCH] dm-io: Prevent the danging point of the sync io callback function
- From: Joe Thornber <thornber@xxxxxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: Bill <billstuff2001@xxxxxxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: NeilBrown <neilb@xxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
[PATCH] dm-io: Fix a race condition in the wake up code for sync_io
- From: Minfei Huang <huangminfei@xxxxxxxxx>
Re: dm-io: Prevent the danging point of the sync io callback function
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Re: [dm-devel] [PATCH] dm-io: Prevent the danging point of the sync io callback function
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Re: dm-io: Prevent the danging point of the sync io callback function
- From: Mike Snitzer <snitzer@xxxxxxxxxx>
Re: [dm-devel] [PATCH] dm-io: Prevent the danging point of the sync io callback function
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Re: [dm-devel] [PATCH] dm-io: Prevent the danging point of the sync io callback function
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Re: Deadlock/high load
- From: Alin Dobre <alin.dobre@xxxxxxxxxxxxxxxx>
Re: [dm-devel] [PATCH] dm-io: Prevent the danging point of the sync io callback function
- From: Joe Thornber <thornber@xxxxxxxxxx>
[PATCH] dm-io: Prevent the danging point of the sync io callback function
- From: Minfei Huang <huangminfei@xxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Lars Ellenberg <lars.ellenberg@xxxxxxxxxx>
Re: /sys/block/md126 still exists even after stopping the array
- From: Francis Moreau <francis.moro@xxxxxxxxx>
Re: [PATCH] Forbid merging with partially assembled IMSM array
- From: NeilBrown <neilb@xxxxxxx>
Re: /sys/block/md126 still exists even after stopping the array
- From: NeilBrown <neilb@xxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
/sys/block/md126 still exists even after stopping the array
- From: Francis Moreau <francis.moro@xxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Lars Ellenberg <lars.ellenberg@xxxxxxxxxx>
Re: Fwd: Adding a new drive to an array
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Fwd: Adding a new drive to an array
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: [RFC PATCH 0/4] md/mdadm: introduce request function mode support
- From: NeilBrown <neilb@xxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Fwd: Adding a new drive to an array
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Fwd: Adding a new drive to an array
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Restoring a RAID 10 disk array
- From: Theodotos Andreou <theo@xxxxxxxxxxxx>
Fwd: Adding a new drive to an array
- From: George Duffield <forumscollective@xxxxxxxxx>
Restoring a RAID 10 disk array
- From: Theodotos Andreou <theo@xxxxxxxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: Bill <billstuff2001@xxxxxxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Lars Ellenberg <lars.ellenberg@xxxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: NeilBrown <neilb@xxxxxxx>
Re: raid5 (re)-add recovery data corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: Adding a new drive to an array
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Adding a new drive to an array
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Stefan Priebe <s.priebe@xxxxxxxxxxxx>
raid5 (re)-add recovery data corruption
- From: Bill <billstuff2001@xxxxxxxxxxxxx>
Re: md kernel thread hung in raid1_add_disk
- From: Matthias Eble <psychotrahe@xxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Lars Ellenberg <lars.ellenberg@xxxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Lars Ellenberg <lars.ellenberg@xxxxxxxxxx>
Re: sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Failed RAID5 & recovery advise
- From: Henry Golas <henry.golas@xxxxxxxxxxx>
sd_setup_discard_cmnd: BUG: unable to handle kernel NULL pointer dereference at (null)
- From: Stefan Priebe - Profihost AG <s.priebe@xxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: "Wilson, Jonathan" <piercing_male@xxxxxxxxxxx>
Re: mismatches after growing raid1 and re-adding a failed drive
- From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: [RFC PATCH 0/4] md/mdadm: introduce request function mode support
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: [RFC PATCH 0/4] md/mdadm: introduce request function mode support
- From: Roberto Spadim <rspadim@xxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Dag Nygren <dag@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: "Wilson, Jonathan" <piercing_male@xxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Failed RAID5 & recovery advise
- From: Henry Golas <Henry.Golas@xxxxxxxxxxx>
Re[2]: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
Re: [RFC PATCH 0/4] md/mdadm: introduce request function mode support
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Re: 3.16-rc1 kernel BUG triggered at mutex.c:586
- From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
Re[2]: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
PATCH: align-spelling-of-md
- From: Christoph Anton Mitterer <calestyo@xxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Phil Turmel <philip@xxxxxxxxxx>
Re[2]: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Phil Turmel <philip@xxxxxxxxxx>
3.16-rc1 kernel BUG triggered at mutex.c:586
- From: Vlad Yasevich <vyasevich@xxxxxxxxx>
Re[2]: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
Re: raid5.c::grow_stripes() kmem_cache_create() race
- From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
Re: PATCH: RAID10-layout-descriptions
- From: Christoph Anton Mitterer <calestyo@xxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: How to fix this superblock?
- From: Pete <psid@xxxxxxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: How to fix this superblock?
- From: NeilBrown <neilb@xxxxxxx>
How to fix this superblock?
- From: Pete <psid@xxxxxxxxxxxxxxxx>
Re: PATCH: RAID10-layout-descriptions
- From: NeilBrown <neilb@xxxxxxx>
Re: Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
PATCH: RAID10-layout-descriptions
- From: Christoph Anton Mitterer <calestyo@xxxxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Found duplicate PV: using /dev/sda3 not /dev/md1
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
Re: RAID newbie, 1 vs 5, chunk sizes
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
RAID newbie, 1 vs 5, chunk sizes
- From: Nuno Magalhães <nunomagalhaes@xxxxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: "ptschack ." <ptschack@xxxxxxxxxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: NeilBrown <neilb@xxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: "ptschack ." <ptschack@xxxxxxxxxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: NeilBrown <neilb@xxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: "ptschack ." <ptschack@xxxxxxxxxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: "ptschack ." <ptschack@xxxxxxxxxxxxxx>
Re: Help with corrupted MDADM Raid6
- From: NeilBrown <neilb@xxxxxxx>
RE: [PATCH] Forbid merging with partially assembled IMSM array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Help with corrupted MDADM Raid6
- From: "ptschack ." <ptschack@xxxxxxxxxxxxxx>
Re: WD Red vs SE/RE drives for mdadm RAID1 (TLER?)
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: md-raid paranoia mode?
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: md-raid paranoia mode?
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: md-raid paranoia mode?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: md-raid paranoia mode?
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: raid5.c::grow_stripes() kmem_cache_create() race
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Do not set default 'before.layout' when reshaping from RAID4 to RAID4
- From: NeilBrown <neilb@xxxxxxx>
Re: md-raid paranoia mode?
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: md-raid paranoia mode?
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: md-raid paranoia mode?
- From: NeilBrown <neilb@xxxxxxx>
Re: md-raid paranoia mode?
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: WD Red vs SE/RE drives for mdadm RAID1 (TLER?)
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: WD Red vs SE/RE drives for mdadm RAID1 (TLER?)
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: md-raid paranoia mode?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: md-raid paranoia mode?
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: RAID-10 explicitly defined drive pairs?
- From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
raid5.c::grow_stripes() kmem_cache_create() race
- From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
WD Red vs SE/RE drives for mdadm RAID1 (TLER?)
- From: Mark Knecht <markknecht@xxxxxxxxx>
RE: [PATCH] Do not set default 'before.layout' when reshaping from RAID4 to RAID4
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Re: md-raid paranoia mode?
- From: Bart Kus <me@xxxxxxxx>
Re: Unable to re-assemble a raid 10 after it has FAILED.
- From: Alberto Morell <amp4tj@xxxxxxxxx>
md-raid paranoia mode?
- From: Bart Kus <me@xxxxxxxx>
Re: md kernel thread hung in raid1_add_disk
- From: NeilBrown <neilb@xxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
Re: Fwd: Unable to re-assemble a raid 10 after it has FAILED.
- From: "John Stoffel" <john@xxxxxxxxxxx>
md kernel thread hung in raid1_add_disk
- From: Matthias Eble <psychotrahe@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: Unable to re-assemble a raid 10 after it has FAILED.
- From: NeilBrown <neilb@xxxxxxx>
Fwd: Unable to re-assemble a raid 10 after it has FAILED.
- From: Alberto Morell <amp4tj@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Wilson Jonathan <piercing_male@xxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: [patch 1/1] raid5: speedup sync_request processing
- From: NeilBrown <neilb@xxxxxxx>
Re: mismatches after growing raid1 and re-adding a failed drive
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID-10 explicitly defined drive pairs?
- From: NeilBrown <neilb@xxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
[patch 1/1] raid5: speedup sync_request processing
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
[patch 1/1] raid5: speedup sync_request processing
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Wolfgang Denk <wd@xxxxxxx>
Re: RAID-10 explicitly defined drive pairs?
- From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Wilson Jonathan <piercing_male@xxxxxxxxxxx>
Re: Recovering RAID set after OS disk failed
- From: Davide Guarisco <guarisco@xxxxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Roman Mamedov <rm@xxxxxxxxxxx>
Re: writing zeros to bad sector results in persistent read error
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
writing zeros to bad sector results in persistent read error
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
mismatches after growing raid1 and re-adding a failed drive
- From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
Re: Recovering data from a shrunk RAID 10 array
- From: NeilBrown <neilb@xxxxxxx>
ANNOUNCE: mdadm 3.3.1 - A tool for managing md Soft RAID under Linux
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Forbid merging with partially assembled IMSM array
- From: NeilBrown <neilb@xxxxxxx>
deadlock between retry_aligned_read with barrier io
- From: hui jiao <simonjiaoh@xxxxxxxxx>
[RFC PATCH 4/4] mdadm: introduce '--use-requestfn' create/assembly option
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
[RFC PATCH 3/4] md: handle IO latency accounting in rqfn mode
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
[RFC PATCH 2/4] md: introduce request function mode support
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
[RFC PATCH 1/4] md: complete bio accounting and add io_latency extension
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
[RFC PATCH 0/4] md/mdadm: introduce request function mode support
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Recovering data from a shrunk RAID 10 array
- From: RedShift <redshift@xxxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
RE: [PATCH] Forbid merging with partially assembled IMSM array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Re: Recovering RAID set after OS disk failed
- From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
Re: Recovering RAID set after OS disk failed
- From: Davide Guarisco <guarisco@xxxxxxxxxxxxx>
Re: [patch 1/1] raid0: discard requests do not align to chunk boundary
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
Re: [PATCH] Forbid merging with partially assembled IMSM array
- From: NeilBrown <neilb@xxxxxxx>
Re: [patch 1/1] raid0: discard requests do not align to chunk boundary
- From: NeilBrown <neilb@xxxxxxx>
[patch 1/1] raid0: discard requests do not align to chunk boundary
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: Roberto Spadim <rspadim@xxxxxxxxx>
RE: [PATCH] Forbid merging with partially assembled IMSM array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
RE: [PATCH 1/1] md: Do only necessary operations when adding device to RO array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Recovering RAID set after OS disk failed
- From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
Re: Recovering RAID set after OS disk failed
- From: Davide Guarisco <guarisco@xxxxxxxxxxxxx>
Re: [PULL REQUEST - 3.15] to md bugfixes, tagged for -stable
- From: NeilBrown <neilb@xxxxxxx>
[PULL REQUEST - 3.15] to md bugfixes, tagged for -stable
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] imsm: retry load_and_parse_mpb if we suspect mdmon has made modifications
- From: NeilBrown <neilb@xxxxxxx>
Re: Home desktop/server RAID upgrade
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: [PATCH] imsm: retry load_and_parse_mpb if we suspect mdmon has made modifications
- From: Artur Paszkiewicz <artur.paszkiewicz@xxxxxxxxx>
RE: Recovering RAID set after OS disk failed
- From: Kővári Péter <peter@xxxxxxxxxxxxxx>
Re: [RFC] Process requests instead of bios to use a scheduler
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: [RFC] Process requests instead of bios to use a scheduler
- From: NeilBrown <neilb@xxxxxxx>
Re: [RFC] Process requests instead of bios to use a scheduler
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Recovering RAID set after OS disk failed
- From: Davide Guarisco <guarisco@xxxxxxxxxxxxx>
Re: [PATCH 2/2] Grow: Do not fork via systemd if freeze_reshape is set
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 1/2] Grow: Use 'forked' also for reshape_container in Grow_continue
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] imsm: retry load_and_parse_mpb if we suspect mdmon has made modifications
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 1/1] md: Do only necessary operations when adding device to RO array
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Do not set default 'before.layout' when reshaping from RAID4 to RAID4
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] Forbid merging with partially assembled IMSM array
- From: NeilBrown <neilb@xxxxxxx>
Re: [RFC] Process requests instead of bios to use a scheduler
- From: NeilBrown <neilb@xxxxxxx>
Re: How to identify a failed md array
- From: NeilBrown <neilb@xxxxxxx>
Help fixing broken array after power loss
- From: "Andrew Hodgetts" <andrew.hodgetts@xxxxxxxxxxxxxx>
Re: How to identify a failed md array
- From: Sebastian Herbszt <herbszt@xxxxxx>
Re: Home desktop/server RAID upgrade
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: Roberto Spadim <rspadim@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: Home desktop/server RAID upgrade
- From: "L.M.J" <linuxmasterjedi@xxxxxxx>
Home desktop/server RAID upgrade
- From: Mark Knecht <markknecht@xxxxxxxxx>
FW: [PATCH 2/2] Grow: Do not fork via systemd if freeze_reshape is set
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
FW: [PATCH 1/2] Grow: Use 'forked' also for reshape_container in Grow_continue
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
[PATCH 1/1] md: Do only necessary operations when adding device to RO array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
[PATCH] Do not set default 'before.layout' when reshaping from RAID4 to RAID4
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
[PATCH] Forbid merging with partially assembled IMSM array
- From: "Baldysiak, Pawel" <pawel.baldysiak@xxxxxxxxx>
[PATCH] imsm: retry load_and_parse_mpb if we suspect mdmon has made modifications
- From: Artur Paszkiewicz <artur.paszkiewicz@xxxxxxxxx>
Keep existing slot number after replacing drive
- From: Thomas Leuxner <tlx@xxxxxxxxxxx>
[patch] DM RAID: fix a couple integer overflows
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: [RFC]raid5: add an option to avoid copy data from bio to stripe cache
- From: NeilBrown <neilb@xxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: NeilBrown <neilb@xxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: forumscollective@xxxxxxxxx
Re: How to identify a failed md array
- From: NeilBrown <neilb@xxxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: NeilBrown <neilb@xxxxxxx>
RE: [PATCH 1/1] driver/md/block: Alloc space for member flush_rq
- From: "Li, Zhen-Hua" <zhen-hual@xxxxxx>
Re: Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: [PATCH 1/1] driver/md/block: Alloc space for member flush_rq
- From: Mike Snitzer <snitzer@xxxxxxxxxx>
[RFC] Process requests instead of bios to use a scheduler
- From: Sebastian Parschauer <sebastian.riemer@xxxxxxxxxxxxxxxx>
Re: [patch 1/3]raid5: adjust order of some operations in handle_stripe
- From: Shaohua Li <shli@xxxxxxxxxx>
[PATCH 1/1] driver/md/block: Alloc space for member flush_rq
- From: "Li, Zhen-Hua" <zhen-hual@xxxxxx>
Re: Which RAID do you recommend for home use?
- From: linuxmasterjedi@xxxxxxx
Re: [patch 1/3]raid5: adjust order of some operations in handle_stripe
- From: NeilBrown <neilb@xxxxxxx>
Re: [patch 1/3]raid5: adjust order of some operations in handle_stripe
- From: Shaohua Li <shli@xxxxxxxxxx>
Re: [patch 1/3]raid5: adjust order of some operations in handle_stripe
- From: NeilBrown <neilb@xxxxxxx>
Re: [patch 1/1] raid5: avoid release list until last reference of the stripe
- From: NeilBrown <neilb@xxxxxxx>
[patch 1/1] raid5: avoid release list until last reference of the stripe
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
Re: Which RAID do you recommend for home use?
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Which RAID do you recommend for home use?
- From: "L. M. J" <linuxmasterjedi@xxxxxxx>
"not enough operational devices (2/4 failed)" Can I recover?
- From: Steve Lorimer <steve.lorimer@xxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: NeilBrown <neilb@xxxxxxx>
Understanding raid array status: Active vs Clean
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: George Duffield <forumscollective@xxxxxxxxx>
How to identify a failed md array
- From: Sebastian Herbszt <herbszt@xxxxxx>
Re: bcache errors
- From: roma1390 <roma1390@xxxxxxxxx>
Re: Seeking help fixing a failed array
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
color box, display box, corrugated box, color card, blister card, color sleeve, hang tag, label
- From: Jinghao Printing - CHINA <dewaynerw5v@xxxxxxxxx>
Re: Seeking help fixing a failed array
- From: Marnitz Gray <marnitz@xxxxxxxxxxxxxx>
Re: Seeking help fixing a failed array
- From: Marnitz Gray <marnitz@xxxxxxxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: NeilBrown <neilb@xxxxxxx>
Aiming for release of mdadm-3.3.1 next week (early June)
- From: NeilBrown <neilb@xxxxxxx>
Re: Seeking help fixing a failed array
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Seeking help fixing a failed array
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
md raid hanging in raid1 rebuild
- From: Thilo Molitor <thilo@xxxxxxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: Dylan Distasio <interzone@xxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: Seeking help fixing a failed array
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Seeking help fixing a failed array
- From: Marnitz Gray <marnitz@xxxxxxxxxxxxxx>
Re: Broken raid 5
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
Invalid bitmap file superblock: bad magic
- From: "Liu H.T" <liuhongtong86@xxxxxxxxx>
[PATCH] md: Use time_in_range()
- From: Manuel Schölling <manuel.schoelling@xxxxxx>
RE: raid6 - data integrity issue - data mis-compare on rebuilding RAID 6 - with 100 Mb resync speed.
- From: "Manibalan P" <pmanibalan@xxxxxxxxxxxxxx>
RE: raid6 - data integrity issue - data mis-compare on rebuilding RAID 6 - with 100 Mb resync speed.
- From: "Manibalan P" <pmanibalan@xxxxxxxxxxxxxx>
[patch 3/3]raid5: reduce handle_stripe() called times for full stripe write
- From: Shaohua Li <shli@xxxxxxxxxx>
[patch 1/3]raid5: adjust order of some operations in handle_stripe
- From: Shaohua Li <shli@xxxxxxxxxx>
[patch 2/3]raid5: make raid_run_ops take reference of ops_request
- From: Shaohua Li <shli@xxxxxxxxxx>
Re: Broken raid 5
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
Re: Rebuilding a RAID5 array after drive (hardware) failure
- From: NeilBrown <neilb@xxxxxxx>
Rebuilding a RAID5 array after drive (hardware) failure
- From: George Duffield <forumscollective@xxxxxxxxx>
Re: [PATCH] mdadm: Do not reimplment offsetof
- From: NeilBrown <neilb@xxxxxxx>
Broken raid 5
- From: "L. M. J" <linuxmasterjedi@xxxxxxx>
[PATCH] mdadm: Do not reimplment offsetof
- From: Cristian Rodríguez <crrodriguez@xxxxxxxxxxxx>
Re: [RFC]raid5: add an option to avoid copy data from bio to stripe cache
- From: Shaohua Li <shli@xxxxxxxxxx>
Re: [RFC]raid5: add an option to avoid copy data from bio to stripe cache
- From: NeilBrown <neilb@xxxxxxx>
Re: Stuck array after reshape
- From: NeilBrown <neilb@xxxxxxx>
Re: System freeze triggered by RAID 10 resync and high io
- From: NeilBrown <neilb@xxxxxxx>
System freeze triggered by RAID 10 resync and high io
- From: christian.schwarz@xxxxxxxxx
Stuck array after reshape
- From: Davíð Steinn Geirsson <david@xxxxxx>
Re: Stuck array after reshape
- From: Davíð Steinn Geirsson <david@xxxxxx>
Re: Sequential writing to degraded RAID6 causing a lot of reading
- From: NeilBrown <neilb@xxxxxxx>
Re: Sequential writing to degraded RAID6 causing a lot of reading
- From: Patrik Horník <patrik@xxxxxx>
Re: evacuating drives in a RAID10 array
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: [RFC]raid5: adjust operation order of handle_stripe
- From: NeilBrown <neilb@xxxxxxx>
Re: IMSM - problem with reshape+systemd
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 9/13] md: make return of 0 explicit
- From: NeilBrown <neilb@xxxxxxx>
Re: Sequential writing to degraded RAID6 causing a lot of reading
- From: NeilBrown <neilb@xxxxxxx>
evacuating drives in a RAID10 array
- From: Bryan Carmula <bryancarmula@xxxxxxxxx>
Re: raid6 - data integrity issue - data mis-compare on rebuilding RAID 6 - with 100 Mb resync speed.
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: bcache errors
- From: Kent Overstreet <kmo@xxxxxxxxxxxxx>
bcache errors
- From: roma1390 <roma1390@xxxxxxxxx>
[PATCH 0/13] make return of 0 explicit
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
[PATCH 9/13] md: make return of 0 explicit
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
Re: [RFC]raid5: adjust operation order of handle_stripe
- From: NeilBrown <neilb@xxxxxxx>

[Index of Archives] [Linux RAID Wiki] [ATA RAID] [Linux SCSI Target Infrastructure] [Linux Block] [Linux IDE] [Linux SCSI] [Linux Hams] [Device Mapper] [Kernel] [Linux Admin] [Linux Net] [GFS] [RPM] [git] [Yosemite Forum] [Linux Networking]