On Sun Aug 31, 2014 at 12:43:26PM +0000, Mike Muratet wrote:
> I am doing some experiments with mdadm to combine two 1TB disks into a RAID
> array. I used fdisk to create the partitions and mdadm to create a two disk
> RAID5 array. I would like to have more space and I can live without
> redundancy. I searched the man pages and boards for a way to do that and found:
>
> $ sudo mdadm /dev/md0 -f /dev/sdd
> mdadm: set /dev/sdd faulty in /dev/md0
> $ sudo mdadm /dev/md0 -r /dev/sdd
> mdadm: hot removed /dev/sdd from /dev/md0
> $ sudo echo raid0 > /sys/block/md0/md/level
>
> -bash: /sys/block/md0/md/level: Permission denied
>
> which was not the result I expected.
>
> Is it possible to convert RAID5 to RAID0?
>
It should be, yes. I'd use "mdadm --grow --level=0" rather than direct
interaction with sysfs though. You may need to add "--force" in order to
get a 1-disk RAID0 array though (it's mentioned as being required for
create anyway).
> There are no data on the disk. Is there a way to start over?
>
Sure. Just stop the arrays (mdadm -S /dev/md0) and then run a new create
command. You'll be prompted about an existing array (and filesystem, if
you'd created that) but can continue to overwrite with the new settings.
Cheers,
Robin
--
___
( ' } | Robin Hill <robin@xxxxxxxxxxxxxxx> |
/ / ) | Little Jim says .... |
// !! | "He fallen in de water !!" |
Attachment:
signature.asc
Description: Digital signature
