Hi,
I have personal nas with open media vault. It is working quite good, if it is up and running. When I turn it off for a week, it does not assemble my raid, or it assembles it in degraded mode. Problem is in hardware. I use port replicators. They probably need to be warmed up before they provide access to all hdd. Beside this problem, can someone guide me to magic of linux software raid?
I have one disk for OS (no raid, no problems :)
Than I have three disks without raid.
And than I have nine disks which should assemble single raid with raid10, n3 layout. I have done mdadm --examine on all of them. Results are attached. I reference all disks by ID. Here is my mdadm.conf:
root@nas:~# grep ARRAY /etc/mdadm/mdadm.conf
ARRAY /dev/md/3 metadata=1.2 name=nas:3 devices=/dev/disk/by-id/ata-ST320LT012-9WS14C_W0V0VD64,/dev/disk/by-id/ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DJTWJ,/dev/disk/by-id/ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DHUUW,/dev/disk/by-id/ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DUVZY,/dev/disk/by-id/ata-ST320LT012-9WS14C_W0V0WAP9,/dev/disk/by-id/ata-ST320LT012-9WS14C_W0V0VCHR,/dev/disk/by-id/ata-WDC_WD3200BPVT-80JJ5T0_WD-WXG1C12P3593,/dev/disk/by-id/ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1CHAWF,/dev/disk/by-id/ata-ST320LT012-9WS14C_W0V0V9A4
See that if you do "grep "Array UUID" *" command on all attachement, that all disks have same array UUID and despite this, array state is not same from point of view of given disk:
root@nas:~/temp/raid10n3examine$ grep "Array State" *
disk1-ata-ST320LT012-9WS14C_W0V0VD64: Array State : AAAAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
disk2-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DJTWJ: Array State : .AA.AA..A ('A' == active, '.' == missing, 'R' == replacing)
disk3-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DHUUW: Array State : ..A.....A ('A' == active, '.' == missing, 'R' == replacing)
disk4-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DUVZY: Array State : AAAAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
disk5-ata-ST320LT012-9WS14C_W0V0WAP9: Array State : .AA.AA..A ('A' == active, '.' == missing, 'R' == replacing)
disk6-ata-ST320LT012-9WS14C_W0V0VCHR: Array State : .AA.AA..A ('A' == active, '.' == missing, 'R' == replacing)
disk7-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXG1C12P3593: Array State : AAAAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
disk8-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1CHAWF: Array State : AAAAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
disk9-ata-ST320LT012-9WS14C_W0V0V9A4: Array State : .AA.AA..A ('A' == active, '.' == missing, 'R' == replacing)
I have these questions:
1. why does my array assemble automatically?
2. is there possibility to assemble array in a such way, that array will "elect" which data is on more disks and rewrite last disk if needed?
3. is there possibility to assemble array in cooperation with filesystem? That filesystem will have chance to choose blocks from all three disks and choose correct one from his point of view?
4. what should I do to have my data OK?
PS: I have lvm on top of that raid with a few volumes. All volumes with ext4 fs on them.
Attachment:
disk1-ata-ST320LT012-9WS14C_W0V0VD64
Description: Binary data
Attachment:
disk2-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DJTWJ
Description: Binary data
Attachment:
disk3-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DHUUW
Description: Binary data
Attachment:
disk4-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1DUVZY
Description: Binary data
Attachment:
disk5-ata-ST320LT012-9WS14C_W0V0WAP9
Description: Binary data
Attachment:
disk6-ata-ST320LT012-9WS14C_W0V0VCHR
Description: Binary data
Attachment:
disk7-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXG1C12P3593
Description: Binary data
Attachment:
disk8-ata-WDC_WD3200BPVT-80JJ5T0_WD-WXF1EC1CHAWF
Description: Binary data
Attachment:
disk9-ata-ST320LT012-9WS14C_W0V0V9A4
Description: Binary data
