Linux USB Users

• Thread Index

• Re: tcm_usb_gadget - how to use?
  • From: Thomas Knauth <thomas.knauth@xxxxxx>
• Re: [PATCH 3/3] usb/gadgets: push iSerialNumber into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb/gadget: make sure each gadget is using same index for Product, Serial,…
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: tcm_usb_gadget - how to use?
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: new device: Foxconn/Novatel E396
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2] usb: otg: Move phy interface to separate file.
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• RE: [PATCH] usb: otg: Move phy interface to separate file.
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: tcm_usb_gadget - how to use?
  • From: Thomas Knauth <thomas.knauth@xxxxxx>
• Re: USB device fails to enumerate after multiple connect and disconnect in host mode
  • From: megha dey <meg161089@xxxxxxxxx>
• RE: [PATCH] usb: tegra: moving phy driver into drivers directory
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] usb: otg: mxs-phy: Allow USB host to work on mx23
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] usb: otg: Move phy interface to separate file.
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH] usb: dwc3: correct default value of maxburst
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• Re: detected XactErr
  • From: "Gary E. Miller" <gem@xxxxxxxxxx>
• Re: [PATCH 3/3] usb/gadgets: push iSerialNumber into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 2/3] usb/gadget: make sure each gadget is using same index for Product, Serial,…
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 1/3] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• [PATCH] usb: remove libusual
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 2/3] usb/gadget: make sure each gadget is using same index for Product, Serial,…
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/3] usb/gadgets: push iSerialNumber into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/3] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• push gadget module options into gadgets, v2
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: detected XactErr
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• detected XactErr
  • From: "Gary E. Miller" <gem@xxxxxxxxxx>
• Re: [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: advice on hardware error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB device fails to enumerate after multiple connect and disconnect in host mode
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v2 0/5] usb: gadget: s3c2410_udc: Fixes and cleanup
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH] usb: tegra: moving phy driver into drivers directory
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] usb: otg: Move phy interface to separate file.
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 0/5] usb: chipidea: fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/5] usb: chipidea: udc: fix error path in udc_start()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] usb: chipidea: udc: fix setup of endpoint maxpacket size
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/5] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/5] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/5] usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 15/20] usb/gadget: push iManufacturer into gadgets
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH] net: qmi_wwan: new device: Foxconn/Novatel E396
  • From: Aleksander Morgado <aleksander@xxxxxxxxxx>
• RE: [PATCH] usb: tegra: moving phy driver into drivers directory
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH] usb: otg: Move phy interface to separate file.
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: tcm_usb_gadget - how to use?
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: tegra: moving phy driver into drivers directory
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: tegra: moving phy driver into drivers directory
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH v2 11/11] USB: chipidea: re-order irq handling to avoid unhandled irq
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 10/11] USB: chipidea: add set_vbus_power support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 09/11] USB: chipidea: add -DDEBUG if CONFIG_USB_CHIPIDEA_DEBUG
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 08/11] USB: chipidea: convert to use devm_request_irq
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 07/11] USB: chipidea: add vbus detect for udc
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 03/11] USB: chipidea: move OTGSC_IDIS clearing from ci_role_work to irq handler
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 02/11] USB: chipidea: delay 2ms before read ID status at probe time
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 01/11] USB: chipidea: imx: add pinctrl support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 00/11] chipidea/imx: add otg support and some bug fix
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v6 2/3] ARM: imx6q: clk_register_clkdev usbmisc clock
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v6 3/3] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v6 0/3] imx: add usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: USB device fails to enumerate after multiple connect and disconnect in host mode
  • From: megha dey <meg161089@xxxxxxxxx>
• Re: SECURITY ERASE UNIT gets IDNF instead of ABRT?
  • From: Norman Diamond <n0diamond@xxxxxxxxxxx>
• SECURITY ERASE UNIT gets IDNF instead of ABRT?
  • From: Norman Diamond <n0diamond@xxxxxxxxxxx>
• Re: USB device fails to enumerate after multiple connect and disconnect in host mode
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• USB device fails to enumerate after multiple connect and disconnect in host mode
  • From: megha dey <meg161089@xxxxxxxxx>
• Re: [PATCH] usb: chipidea: ci13xxx_imx: fix regulator unbalance disable
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: chipidea driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• advice on hardware error
  • From: Bo Brantén <bosse@xxxxxxxxxx>
• Re: [PATCH V4] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH V4] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH] usb: chipidea: ci13xxx_imx: fix regulator unbalance disable
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [Patch v2] block: remove the deprecated ub driver
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: Virtualbox/Vmware usb device is working but on installed linux not.
  • From: "adam ?" <adam3337@xxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH] usbhid: add NOGET quirk for Eaton Ellipse MAX UPS
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 14/20] usb/gadget: push iSerialNumber into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 4/6] drivers/usb/host/ohci-nxp.c: adjust inconsistent IS_ERR and PTR_ERR
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/20] usb/gadget: push iManufacturer into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 14/20] usb/gadget: push iSerialNumber into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: how important is usb_gadget_controller_number() (WAS: Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite)
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: how important is usb_gadget_controller_number() (WAS: Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: how important is usb_gadget_controller_number() (WAS: Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite)
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/20] usb/gadget: push iSerialNumber into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: how important is usb_gadget_controller_number() (WAS: Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: memory ordering fix in close
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: how important is usb_gadget_controller_number() (WAS: Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite)
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 09/20] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Miroslav Sabljic <miroslav.sabljic@xxxxxxx>
• Re: [PATCH] usb/dwc3: Fix Pedning isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] usb/dwc3: Fix Pedning isoc
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 15/20] usb/gadget: push iManufacturer into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/20] usb/gadget: push iSerialNumber into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• how important is usb_gadget_controller_number() (WAS: Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite)
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 09/20] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/20] staging/ccg: make composite.c function static and remove unsused
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH] usb: dwc3: memory ordering fix in close
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [RFT] testers for CDC-EEM devices wanted
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] USB: cp210x: remove useless set memory to zero use memset()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch v2] block: remove the deprecated ub driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch v2] block: remove the deprecated ub driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: memory ordering fix in close
  • From: oliver@xxxxxxxxxx
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: David Ranch <dranch@xxxxxxxxxxx>
• Re: [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: Virtualbox/Vmware usb device is working but on installed linux not.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/xhci: unify parameter of xhci_msi_irq
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [Patch v2] block: remove the deprecated ub driver
  • From: Cong Wang <amwang@xxxxxxxxxx>
• Re: [Patch] block: remove the deprecated ub driver
  • From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
• Re: Virtualbox/Vmware usb device is working but on installed linux not.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/xhci: unify parameter of xhci_msi_irq
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• usb: cdc-acm: remove duplicated include from cdc-acm.c
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH] usb: gadget: remove duplicated include from pxa25x_udc.c
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] drivers/usb/host/ohci-nxp.c: adjust inconsistent IS_ERR and PTR_ERR
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 3/6] drivers/usb/gadget/lpc32xx_udc.c: adjust inconsistent IS_ERR and PTR_ERR
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: David Ranch <dranch@xxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V4] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [Patch] block: remove the deprecated ub driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: otg: Improve phy handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] xhci: Recognize USB 3.0 devices as superspeed at powerup
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Virtualbox/Vmware usb device is working but on installed linux not.
  • From: "adam ?" <adam3337@xxxxx>
• Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• [PATCH] usb/dwc3: Fix Pedning isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH 5/5] usb/dwc3: fix no request in request_list when start isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/20] usb/gadget: push iManufacturer into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 14/20] usb/gadget: push iSerialNumber into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: David Ranch <dranch@xxxxxxxxxxx>
• Re: [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 09/20] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 10/20] usb/gadget: use usb_string_ids_tab instead multiple usb_string_id()
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 05/20] staging/ccg: make composite.c function static and remove unsused
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 03/20] usb/gadget: move global vars from epautoconf into struct usb_gadget
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 01/20] usb/gadget: start with libcomposite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: Scanner works on USB-2 port but not on USB-3 because of usbfs claiming the interface
  • From: Harald Judt <h.judt@xxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: David Ranch <dranch@xxxxxxxxxxx>
• Re: [PATCH 7/7 really v3] usb/gadget: remove global variable composite in composite.c
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/20] usb/gadget: initialize the strings in tcm_usb_gadget properly
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 10/20] usb/gadget: use usb_string_ids_tab instead multiple usb_string_id()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 15/20] usb/gadget: push iManufacturer into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 13/20] usb/gadget: move usb_gadget_controller_number() into a .c file and libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 20/20] usb/libcomposite: move MODULE_VERSION to composite.c
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 19/20] usb/libcomposite: move composite.c into libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 14/20] usb/gadget: push iSerialNumber into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 16/20] usb/gadgets: make sure all gadgets provide an iManufacturer string
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 18/20] usb/gadget: push iProduct into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 17/20] usb/composite: remove unsused composite_manufacturer variable
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 11/20] usb/gadget: make g_printer enumerate again
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 09/20] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 05/20] staging/ccg: make composite.c function static and remove unsused
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 08/20] usb/gadget: make composite module options readonly only
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 07/20] usb/gadget: remove bufsiz from struct usb_composite_dev
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 03/20] usb/gadget: move global vars from epautoconf into struct usb_gadget
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 06/20] usb/gadget: move USB_BUFSIZ into global composite.h
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 04/20] usb/libcomposite: add epautoconf.c to libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 02/20] usb/libcomposite: move config.c into libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 01/20] usb/gadget: start with libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• create libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: David Ranch <dranch@xxxxxxxxxxx>
• Re: [PATCH 0/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7 really v3] usb/gadget: remove global variable composite in composite.c
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 7/7 v2] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 7/7 v3] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] usb/gadget: start with libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 7/7 v2] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb: gadget: get rid of USB_GADGET_{DUAL,SUPER}SPEED
  • From: Michal Nazarewicz <mpn@xxxxxxxxxx>
• [PATCH 7/7 v3] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 7/7 v2] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• USB sound issue / status
  • From: "Dr. Ing. Dieter Jurzitza" <dieter.jurzitza@xxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Potential fsg->state problem at file_storage.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7 v2] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [PATCH 5/5] usb/dwc3: fix no request in request_list when start isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• surfstick K5006-Z in 3.6.0-rc3
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• [PATCH 4/5] usb/dwc3: Fix skip LINK-TRB on ISOC
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH 5/5] usb/dwc3: fix no request in request_list when start isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 2/5] usb/dwc3: Fix missed isoc
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 3/5] usb/dwc3: Fix next request to handle in case of update transfer
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 1/5] usb/dwc3:Move udelay within stop_active_transfe
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 0/5] dwc3 fixes
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] usb otg: TWL4030_USB depends on USB_MUSB_OMAP2PLUS in Kconfig
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [PATCH v2] usb otg: TWL4030_USB to depend on USB_MUSB_OMAP2PLUS in Kconfig
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH 2/4] usb: chipidea: udc: set endpoint to undefined maxpacket size on start
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: chipidea: udc: set endpoint to undefined maxpacket size on start
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] usb: chipidea: udc: set endpoint to undefined maxpacket size on start
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: chipidea: udc: fix error path in udc_start()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: Potential fsg->state problem at file_storage.c
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: chipidea: udc: fix error path in udc_start()
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 2/9] usb/libcomposite: move config.c into libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 7/7 v2] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] usb: chipidea: udc: set endpoint to undefined maxpacket size on start
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: chipidea driver
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb otg: TWL4030_USB depends on USB_MUSB_OMAP2PLUS in Kconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: chipidea driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: otg: Improve phy handling
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: Huawei E372 does not work via TI usb3 chip
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb otg: TWL4030_USB depends on USB_MUSB_OMAP2PLUS in Kconfig
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/3] usb: phy: get phy driver's module if phy is acquired
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: phy: get phy driver's module if phy is acquired
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/4] usb: chipidea: udc: set endpoint to undefined maxpacket size on start
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/4] usb: chipidea: udc: fix error path in udc_start()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/4] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/4] usb: chipidea: Fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/4] usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/3] usb: otg: Improve phy handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/3] usb: mxs-phy: register phy as USB_PHY_TYPE_USB2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/3] usb: phy: get phy driver's module if phy is acquired
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• chipidea driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] usbhid: add NOGET quirk for Eaton Ellipse MAX UPS
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Fix Kconfig dependency on USB_ISP1301
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] usb/gadget: start with libcomposite
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/9] usb/gadget: make composite module options readonly only
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 4/9] usb/gadget: add epautoconf.c to libcomposite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 9/9] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 9/9] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [rtc-linux] RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/9] usb/gadget: add epautoconf.c to libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [rtc-linux] [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/9] usb/gadget: move global vars from epautoconf into struct usb_gadget
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 7/9] usb/gadget: remove bufsiz from struct usb_composite_dev
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 6/9] usb/gadget: move USB_BUFSIZ into global composite.h
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 4/9] usb/gadget: add epautoconf.c to libcomposite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 1/9] usb/gadget: start with libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/9] usb/gadget: move global vars from epautoconf into struct usb_gadget
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 2/9] usb/libcomposite: move config.c into libcomposite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 1/9] usb/gadget: start with libcomposite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• [PATCH] usb: ohci: Fix Kconfig dependency on USB_ISP1301
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: PROBLEM: Certain USB devices wake up the system after power off
  • From: Àlex Magaz Graça <rivaldi8@xxxxxxxxx>
• [PATCH 8/9] usb/gadget: make composite module options readonly only
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 9/9] usb/gadget: push VID/PID/USB BCD module option into gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 7/9] usb/gadget: remove bufsiz from struct usb_composite_dev
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 6/9] usb/gadget: move USB_BUFSIZ into global composite.h
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 5/9] staging/ccg: make composite.c function static and remove unsused
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/9] usb/gadget: add epautoconf.c to libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/9] usb/gadget: move global vars from epautoconf into struct usb_gadget
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/9] usb/gadget: start with libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/9] usb/libcomposite: move config.c into libcomposite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [GIT PULL] USB fixes for v3.6-rc4
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [GIT PULL] USB fixes for v3.6-rc4
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: USB: DWC3: Missed Isoc issue
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFT] xhci: Switch PPT ports to EHCI on shutdown.
  • From: Robert Hancock <hancockrwd@xxxxxxxxx>
• [PATCH] usb: renesas_usbhs: fixup DMA transport data alignment
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Laurent Bigonville <l.bigonville@xxxxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [RFC ebeam PATCH v4 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v4 1/2] hid: Blacklist eBeam devices
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v4 0/2] new USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Amit Uttamchandani <amit.uttam@xxxxxxxxx>
• Re: [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb/pxa25x: make it compile with debug again
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: USB: DWC3: Missed Isoc issue
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 1/1] xhci: Recognize USB 3.0 devices as superspeed at powerup
  • From: manoj.iyer@xxxxxxxxxxxxx
• [PATCH 0/1] xhci: Recognize USB 3.0 devices as superspeed at powerup
  • From: manoj.iyer@xxxxxxxxxxxxx
• Re: PROBLEM: Certain USB devices wake up the system after power off
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>
• PROBLEM: Certain USB devices wake up the system after power off
  • From: Àlex Magaz Graça <rivaldi8@xxxxxxxxx>
• Re: [PATCH] usbfs: Add a new disconnect-and-claim ioctl
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Miroslav Sabljic <miroslav.sabljic@xxxxxxx>
• Re: [PATCH 7/7] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usbfs: Add a new disconnect-and-claim ioctl
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] usb composite: fix locking in usb_function_activate
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb composite: fix locking in usb_function_activate
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] usb composite: fix locking in usb_function_activate
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usbfs: Add a new disconnect-and-claim ioctl
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] usb: usb port power off mechanism add "auto" option
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• [PATCH 7/7] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 6/7] staging/ccg: provide a copy of composite.c for ccg
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 5/7] staging/ccg: initialize ret in functionfs_ready_callback()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/7] usb/gadget: move bind() callback back to struct usb_gadget_driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/7] usb/gadget: move bind() callback back to struct usb_composite_driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/7] usb/gadget: push all usb_composite_driver structs into __refdata
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/7] gadget/composite: move bind callback into driver struct
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Towords libcomposite, v2
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb composite: fix locking in usb_function_activate
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] usb: usb port power off mechanism add "auto" option
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH] usb/xhci: update a comment regarding the BOS descriptor to reflect the code
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb/dummy_hcd: remove the wrong comment regarding hub descriptor
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] usbfs: Add a new disconnect-and-claim ioctl
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Andiry Xu <andiry@xxxxxxxxx>
• RE: [PATCH 1/4] g_file_storage: implement ->reset method
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] usbfs: Add a new disconnect-and-claim ioctl
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] staging/ccg: Allow to overwrite composite's setup function
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/9] usb/gadgets: move bind() callback back to struct usb_composite_driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] staging/ccg: Allow to overwrite composite's setup function
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/9] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usbfs: Add a new disconnect-and-claim ioctl
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/9] usb/gadgets: move bind() callback back to struct usb_composite_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB: DWC3: Missed Isoc issue
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• [PATCH v2 0/5] usb: gadget: s3c2410_udc: Fixes and cleanup
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v2 1/5] usb: gadget: s3c2410_udc: Replace <asm/io.h> with <linux/io.h>
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v2 2/5] usb: gadget: s3c2410_udc: Use pr_* and dev_err functions
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v2 3/5] usb: gadget: s3c2410_udc: Silence checkpatch errors and warnings
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v2 5/5] usb: gadget: s3c2410_udc: Do not use integer for NULL
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v2 4/5] usb: gadget: s3c2410_udc: Move assignment outside if condition
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 2/5] usb: gadget: s3c2410_udc: Use pr_* functions
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• USB: DWC3: Missed Isoc issue
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [RESEND PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 0/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: Rene Buergel <rene.buergel@xxxxxxxxx>
• Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] usb: gadget: s3c2410_udc: Use pr_* functions
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 2/5] usb: gadget: s3c2410_udc: Use pr_* functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/5] usb: gadget: s3c2410_udc: Use pr_* functions
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 2/5] usb: gadget: s3c2410_udc: Use pr_* functions
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC PATCH 1/2] usb: usb port power off mechanism add "auto" option
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 5/5] usb: gadget: s3c2410_udc: Do not use integer for NULL
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 4/5] usb: gadget: s3c2410_udc: Move assignment outside if condition
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 3/5] usb: gadget: s3c2410_udc: Silence checkpatch errors and warnings
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 2/5] usb: gadget: s3c2410_udc: Use pr_* functions
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 1/5] usb: gadget: s3c2410_udc: Replace <asm/io.h> with <linux/io.h>
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 0/5] usb: gadget: s3c2410_udc: Fixes and cleanup
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: Andiry Xu <andiry@xxxxxxxxx>
• RE: [PATCH 1/4] g_file_storage: implement ->reset method
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 9/9] arm: vt8500: clk: Add Common Clock Framework support
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] musb_core: fix kernel-doc of musb_init_controller()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: add support for USB_DT_BOS on rh
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: add support for USB_DT_BOS on rh
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb/dummy_hcd: add support for USB_DT_BOS on rh
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb/dummy_hcd: fixup error probe path
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [RFC PATCH 1/2] usb: usb port power off mechanism add "auto" option
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] g_file_storage: implement ->reset method
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 1/4] g_file_storage: implement ->reset method
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: Kernel NULL pointer deref. in musb_gadget on arm davinci omapl138 platform
  • From: Bastian.Ruppert@xxxxxxxxxx
• Re: Re: Re: 3.0 device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: Re: USB device no longer recognized with kernel newer than 2.6
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] tusb6010: fix error path in tusb_probe()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] usb: dwc3: debugfs: fixes debugfs regdump returning all zeros
  • From: Vikas Sajjan <vikas.sajjan@xxxxxxxxxxx>
• Re: [PATCH] tusb6010: fix error path in tusb_probe()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: dwc3: core: fix incorrect usage of resource pointer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Re: Re: 3.0 device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC PATCH 2/2] USB: Set usb port's DevicerRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH 1/2] usb: usb port power off mechanism add "auto" option
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• RE: [RFC 0/2] USB gadget - configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Kernel NULL pointer deref. in musb_gadget on arm davinci omapl138 platform
  • From: Bastian.Ruppert@xxxxxxxxxx
• RE: [PATCH 1/4] g_file_storage: implement ->reset method
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH] usb: otg: mxs-phy: Allow USB host to work on mx23
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] usb: otg: mxs-phy: Allow USB host to work on mx23
  • From: Sean Cross <xobs@xxxxxxxx>
• [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: manoj.iyer@xxxxxxxxxxxxx
• [PATCH 0/1] xhci: Unconditionally switch ports to xHCI on powerup
  • From: manoj.iyer@xxxxxxxxxxxxx
• [PATCH] usb: otg: mxs-phy: Allow USB host to work on mx23
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH] USB: mos7720: fix to use list_for_each_entry_safe() when delete items
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Tabi Timur-B04825 <B04825@xxxxxxxxxxxxx>
• [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Build usb_speed_string unconditionally
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: Build usb_speed_string unconditionally
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Build usb_speed_string unconditionally
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Build usb_speed_string unconditionally
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• [PATCH 4/4] net2272: add support for new "reset" callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] net2280: add support for new "reset" callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] dummy-hcd: add support for new "reset" callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] g_file_storage: implement ->reset method
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] dummy-hcd: remember to update driver pointer
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Build usb_speed_string unconditionally
  • From: Andi Kleen <ak@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] USB: Build usb_speed_string unconditionally
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Fwd: Re: USB device no longer recognized with kernel newer than 2.6
  • From: Arnaud René Ober <diaryscrazyman@xxxxxxxxx>
• Re: [PATCH] xhci: Make handover code more robust
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: Build usb_speed_string unconditionally
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: USB device no longer recognized with kernel newer than 2.6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make handover code more robust
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• [GIT PATCH] More USB fixes for 3.6-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] musbhsdma: fix IRQ check
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] musbhsdma: fix IRQ check
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] tusb6010: fix error path in tusb_probe()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH RESEND] gpu/mfd/usb: Fix USB randconfig problems
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND] gpu/mfd/usb: Fix USB randconfig problems
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 3.6 regression? Serial port stays open after USB device disconnect
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging/ccg: Allow to overwrite composite's setup function
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>