This patch adds common clock framework support for arch-vt8500.
Support for PLL and device clocks on VT8500, WM8505 and WM8650
are included.
Signed-off-by: Tony Prisk <linux@xxxxxxxxxxxxxxx>
---
drivers/clk/Makefile | 1 +
drivers/clk/clk-vt8500.c | 496 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 497 insertions(+)
create mode 100644 drivers/clk/clk-vt8500.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5869ea3..42fb173 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
+obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
new file mode 100644
index 0000000..524c479
--- /dev/null
+++ b/drivers/clk/clk-vt8500.c
@@ -0,0 +1,496 @@
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+
+/* All clocks share the same lock as none can be changed concurrently */
+static DEFINE_SPINLOCK(_lock);
+
+struct clk_device {
+ struct clk_hw hw;
+ void __iomem *div_reg;
+ unsigned int div_mask;
+ void __iomem *en_reg;
+ int en_bit;
+ spinlock_t *lock;
+};
+
+/*
+ * Add new PLL_TYPE_x definitions here as required. Use the first known model
+ * to support the new type as the name.
+ * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and
+ * vtwm_pll_set_rate() to handle the new PLL_TYPE_x
+ */
+
+#define PLL_TYPE_VT8500 0
+#define PLL_TYPE_WM8650 1
+
+struct clk_pll {
+ struct clk_hw hw;
+ void __iomem *reg;
+ spinlock_t *lock;
+ int type;
+};
+
+static void __iomem *pmc_base;
+
+#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
+
+
+#define VT8500_PMC_BUSY_MASK 0x18
+
+static void vt8500_pmc_wait_busy(void)
+{
+ while (readl(pmc_base) & VT8500_PMC_BUSY_MASK)
+ cpu_relax();
+}
+
+static void vt8500_dclk_endisable(struct clk_hw *hw, int enable)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 en_val;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(cdev->lock, flags);
+
+ en_val = readl(cdev->en_reg);
+
+ if (enable)
+ en_val |= BIT(cdev->en_bit);
+ else
+ en_val &= ~BIT(cdev->en_bit);
+
+ writel(en_val, cdev->en_reg);
+
+ spin_unlock_irqrestore(cdev->lock, flags);
+}
+
+static int vt8500_dclk_enable(struct clk_hw *hw)
+{
+ vt8500_dclk_endisable(hw, 1);
+ return 0;
+}
+
+static void vt8500_dclk_disable(struct clk_hw *hw)
+{
+ vt8500_dclk_endisable(hw, 0);
+}
+
+static int vt8500_dclk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit));
+
+ return en_val ? 1 : 0;
+}
+
+static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 div = readl(cdev->div_reg) & cdev->div_mask;
+
+ /* Special case for SDMMC devices */
+ if ((cdev->div_mask == 0x3F) && (div & BIT(5)))
+ div = 64 * (div & 0x1f);
+
+ /* div == 0 is actually the highest divisor */
+ if (div == 0)
+ div = (cdev->div_mask + 1);
+
+ return parent_rate / div;
+}
+
+static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u32 divisor = rate / *prate;
+
+ return *prate / divisor;
+}
+
+static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 divisor = rate / parent_rate;
+ unsigned long flags = 0;
+
+ if (divisor == cdev->div_mask + 1)
+ divisor = 0;
+
+ if (divisor > cdev->div_mask) {
+ pr_err("%s: invalid divisor for clock\n", __func__);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(cdev->lock, flags);
+
+ vt8500_pmc_wait_busy();
+ writel(divisor, cdev->div_reg);
+ vt8500_pmc_wait_busy();
+
+ spin_lock_irqsave(cdev->lock, flags);
+
+ return 0;
+}
+
+
+static const struct clk_ops vt8500_gated_clk_ops = {
+ .enable = vt8500_dclk_enable,
+ .disable = vt8500_dclk_disable,
+ .is_enabled = vt8500_dclk_is_enabled,
+};
+
+static const struct clk_ops vt8500_divisor_clk_ops = {
+ .round_rate = vt8500_dclk_round_rate,
+ .set_rate = vt8500_dclk_set_rate,
+ .recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+static const struct clk_ops vt8500_gated_divisor_clk_ops = {
+ .enable = vt8500_dclk_enable,
+ .disable = vt8500_dclk_disable,
+ .is_enabled = vt8500_dclk_is_enabled,
+ .round_rate = vt8500_dclk_round_rate,
+ .set_rate = vt8500_dclk_set_rate,
+ .recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+#define CLK_INIT_GATED BIT(0)
+#define CLK_INIT_DIVISOR BIT(1)
+#define CLK_INIT_GATED_DIVISOR (CLK_INIT_DIVISOR | CLK_INIT_GATED)
+
+static __init void vtwm_device_clk_init(struct device_node *node)
+{
+ u32 en_reg, div_reg;
+ struct clk *clk;
+ struct clk_device *dev_clk;
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_init_data init;
+ int rc;
+ int clk_init_flags = 0;
+
+ dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
+ if (WARN_ON(!dev_clk))
+ return;
+
+ dev_clk->lock = &_lock;
+
+ rc = of_property_read_u32(node, "enable-reg", &en_reg);
+ if (!rc) {
+ dev_clk->en_reg = pmc_base + en_reg;
+ rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit);
+ if (rc) {
+ pr_err("%s: enable-bit property required for gated clock\n",
+ __func__);
+ return;
+ }
+ clk_init_flags |= CLK_INIT_GATED;
+ }
+
+ rc = of_property_read_u32(node, "divisor-reg", &div_reg);
+ if (!rc) {
+ dev_clk->div_reg = pmc_base + div_reg;
+ /*
+ * use 0x1f as the default mask since it covers
+ * almost all the clocks and reduces dts properties
+ */
+ dev_clk->div_mask = 0x1f;
+
+ of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask);
+ clk_init_flags |= CLK_INIT_DIVISOR;
+ }
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ switch (clk_init_flags) {
+ case CLK_INIT_GATED:
+ init.ops = &vt8500_gated_clk_ops;
+ break;
+ case CLK_INIT_DIVISOR:
+ init.ops = &vt8500_divisor_clk_ops;
+ break;
+ case CLK_INIT_GATED_DIVISOR:
+ init.ops = &vt8500_gated_divisor_clk_ops;
+ break;
+ default:
+ pr_err("%s: Invalid clock description in device tree\n",
+ __func__);
+ kfree(dev_clk);
+ return;
+ }
+
+ init.name = clk_name;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ dev_clk->hw.init = &init;
+
+ clk = clk_register(NULL, &dev_clk->hw);
+ if (WARN_ON(IS_ERR(clk))) {
+ kfree(dev_clk);
+ return;
+ }
+ rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+}
+
+
+/* PLL clock related functions */
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Helper macros for PLL_VT8500 */
+#define VT8500_PLL_MUL(x) ((x & 0x1F) << 1)
+#define VT8500_PLL_DIV(x) ((x & 0x100) ? 1 : 2)
+
+#define VT8500_BITS_TO_FREQ(r, m, d) \
+ ((r / d) * m)
+
+#define VT8500_BITS_TO_VAL(m, d) \
+ ((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F))
+
+/* Helper macros for PLL_WM8650 */
+#define WM8650_PLL_MUL(x) (x & 0x3FF)
+#define WM8650_PLL_DIV(x) (((x >> 10) & 7) * (1 << ((x >> 13) & 3)))
+
+#define WM8650_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * m / (d1 * (1 << d2)))
+
+#define WM8650_BITS_TO_VAL(m, d1, d2) \
+ ((d2 << 13) | (d1 << 10) | (m & 0x3FF))
+
+
+static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *multiplier, u32 *prediv)
+{
+ unsigned long tclk;
+
+ /* sanity check */
+ if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) {
+ pr_err("%s: requested rate out of range\n", __func__);
+ *multiplier = 0;
+ *prediv = 1;
+ return;
+ }
+ if (rate <= parent_rate * 31)
+ /* use the prediv to double the resolution */
+ *prediv = 2;
+ else
+ *prediv = 1;
+
+ *multiplier = rate / (parent_rate / *prediv);
+ tclk = (parent_rate / *prediv) * *multiplier;
+
+ if (tclk != rate)
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__,
+ rate, tclk);
+}
+
+static void wm8650_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+ u32 mul, div1, div2;
+ u32 best_mul, best_div1, best_div2;
+ unsigned long tclk, rate_err, best_err;
+
+ best_err = (unsigned long)-1;
+
+ /* Find the closest match (lower or equal to requested) */
+ for (div1 = 5; div1 >= 3; div1--)
+ for (div2 = 3; div2 >= 0; div2--)
+ for (mul = 3; mul <= 1023; mul++) {
+ tclk = parent_rate * mul / (div1 * (1 << div2));
+ if (tclk > rate)
+ continue;
+ /* error will always be +ve */
+ rate_err = rate - tclk;
+ if (rate_err == 0) {
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ return;
+ }
+
+ if (rate_err < best_err) {
+ best_err = rate_err;
+ best_mul = mul;
+ best_div1 = div1;
+ best_div2 = div2;
+ }
+ }
+
+ /* if we got here, it wasn't an exact match */
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+ rate - best_err);
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+}
+
+static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 mul, div1, div2;
+ u32 pll_val;
+ unsigned long flags = 0;
+
+ /* sanity check */
+
+ switch (pll->type) {
+ case PLL_TYPE_VT8500:
+ vt8500_find_pll_bits(rate, parent_rate, &mul, &div1);
+ pll_val = VT8500_BITS_TO_VAL(mul, div1);
+ break;
+ case PLL_TYPE_WM8650:
+ wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+ pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
+ break;
+ default:
+ pr_err("%s: invalid pll type\n", __func__);
+ return 0;
+ }
+
+ spin_lock_irqsave(pll->lock, flags);
+
+ vt8500_pmc_wait_busy();
+ writel(pll_val, pll->reg);
+ vt8500_pmc_wait_busy();
+
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return 0;
+}
+
+static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 mul, div1, div2;
+ long round_rate;
+
+ switch (pll->type) {
+ case PLL_TYPE_VT8500:
+ vt8500_find_pll_bits(rate, *prate, &mul, &div1);
+ round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1);
+ break;
+ case PLL_TYPE_WM8650:
+ wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+ round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
+ break;
+ default:
+ round_rate = 0;
+ }
+
+ return round_rate;
+}
+
+static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 pll_val = readl(pll->reg);
+ unsigned long pll_freq;
+
+ switch (pll->type) {
+ case PLL_TYPE_VT8500:
+ pll_freq = parent_rate * VT8500_PLL_MUL(pll_val);
+ pll_freq /= VT8500_PLL_DIV(pll_val);
+ break;
+ case PLL_TYPE_WM8650:
+ pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
+ pll_freq /= WM8650_PLL_DIV(pll_val);
+ break;
+ default:
+ pll_freq = 0;
+ }
+
+ return pll_freq;
+}
+
+const struct clk_ops vtwm_pll_ops = {
+ .round_rate = vtwm_pll_round_rate,
+ .set_rate = vtwm_pll_set_rate,
+ .recalc_rate = vtwm_pll_recalc_rate,
+};
+
+static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
+{
+ u32 reg;
+ struct clk *clk;
+ struct clk_pll *pll_clk;
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_init_data init;
+ int rc;
+
+ rc = of_property_read_u32(node, "reg", ®);
+ if (WARN_ON(rc))
+ return;
+
+ pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+ if (WARN_ON(!pll_clk))
+ return;
+
+ pll_clk->reg = pmc_base + reg;
+ pll_clk->lock = &_lock;
+ pll_clk->type = pll_type;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ init.name = clk_name;
+ init.ops = &vtwm_pll_ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll_clk->hw.init = &init;
+
+ clk = clk_register(NULL, &pll_clk->hw);
+ if (WARN_ON(IS_ERR(clk))) {
+ kfree(pll_clk);
+ return;
+ }
+ rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+}
+
+
+/* Wrappers for initialization functions */
+
+static void __init vt8500_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_VT8500);
+}
+
+static void __init wm8650_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
+}
+
+static const __initconst struct of_device_id clk_match[] = {
+ { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+ { .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, },
+ { .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, },
+ { .compatible = "via,vt8500-device-clock",
+ .data = vtwm_device_clk_init, },
+ { /* sentinel */ }
+};
+
+void __init vtwm_clk_init(void __iomem *base)
+{
+ if (!base)
+ return;
+
+ pmc_base = base;
+
+ of_clk_init(clk_match);
+}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
