Linux USB Users

• Thread Index

• Re: 3.6 regression? Serial port stays open after USB device disconnect
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: 3.6 regression? Serial port stays open after USB device disconnect
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging/ccg: Allow to overwrite composite's setup function
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] staging/ccg: Allow to overwrite composite's setup function
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: 3.0 device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Miroslav Sabljic <miroslav.sabljic@xxxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: UBS power management and some ehci issues (DM3730, Beagleboard XM)
  • From: Karl <broszkigroszki@xxxxxxxxx>
• Re: 3.6 regression? Serial port stays open after USB device disconnect
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Joel Becker <jlbec@xxxxxxxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Joel Becker <jlbec@xxxxxxxxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: 3.6 regression? Serial port stays open after USB device disconnect
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: UBS power management and some ehci issues (DM3730, Beagleboard XM)
  • From: Karl <broszkigroszki@xxxxxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: renesas_usbhs: modify the irq handler for sharing irq
  • From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• 3.6 regression? Serial port stays open after USB device disconnect
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH net] net: qmi_wwan: new devices: UML290 and K5006-Z
  • From: David Miller <davem@xxxxxxxxxxxxx>
• RE: [RFC 0/2] USB gadget - configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 0/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: Rene Buergel <rene.buergel@xxxxxxxxx>
• [PATCH v2 2/3] usb: gadget: lpc32xx_udc: Remove usb_endpoint_descriptor
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH v2 3/3] usb: gadget: lpc32xx_udc: Support multiple controllers
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH v2 1/3] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: lpc32xx_udc: Remove usb_endpoint_descriptor
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: lpc32xx_udc: Remove usb_endpoint_descriptor
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: gadget: lpc32xx_udc: Support multiple controllers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/3] usb: gadget: lpc32xx_udc: Support multiple controllers
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH 2/3] usb: gadget: lpc32xx_udc: Remove usb_endpoint_descriptor
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH 1/3] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] staging/ccg: Allow to overwrite composite's setup function
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Re: 3.0 device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: UBS power management and some ehci issues (DM3730, Beagleboard XM)
  • From: Karl <broszkigroszki@xxxxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Joel Becker <jlbec@xxxxxxxxxxxx>
• Re: linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: UBS power management and some ehci issues (DM3730, Beagleboard XM)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 1/2] usb/dummy_hcd: fixup error probe path
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 2/2] usb/dummy_hcd: add support for USB_DT_BOS on rh
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• UBS power management and some ehci issues (DM3730, Beagleboard XM)
  • From: Karl <broszkigroszki@xxxxxxxxx>
• FTDI driver "error from flowcontrol urb"
  • From: "Luke-Jr" <luke@xxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: dmesg output / USB sound issue - kernel 3.5.0-RC7-1 from Sarah's repository ...
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: USB device no longer recognized with kernel newer than 2.6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH] USB: isp1301: Remove unused static array and define
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Bjørn Mork <bjorn@xxxxxxx>
• USB device no longer recognized with kernel newer than 2.6
  • From: Arnaud René Ober <diaryscrazyman@xxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: add ZTE EV_DO to a proper driver
  • From: nirinA raseliarison <nirina.raseliarison@xxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Miroslav Sabljic <miroslav.sabljic@xxxxxxx>
• [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Amit Uttamchandani <amit.uttam@xxxxxxxxx>
• Re: add ZTE EV_DO to a proper driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• linux 3.6-rc2, undefined reference to omap_musb_mailbox
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• [PATCH] usb musb: fix spelling of families in Kconfig
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: add ZTE EV_DO to a proper driver
  • From: nirinA raseliarison <nirina.raseliarison@xxxxxxxxx>
• [PATCH] usb host: fix spelling of provides in Kconfig
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Miroslav Sabljic <miroslav.sabljic@xxxxxxx>
• Re: xhci inc_deq question
  • From: loody <miloody@xxxxxxxxx>
• 3.0 device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: [BUG] - USB3 bluetooth device not working properly?
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: xhci inc_deq question
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Kernel oops on usbhid_submit_report (updates)
  • From: Amit <amit.uttam@xxxxxxxxx>
• Re: add ZTE EV_DO to a proper driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] CDC ACM: Fix NULL pointer dereference
  • From: Sven Schnelle <svens@xxxxxxxxxxxxxx>
• Re: [PATCH] CDC ACM: Fix NULL pointer dereference
  • From: Sven Schnelle <svens@xxxxxxxxxxxxxx>
• Re: [PATCH] CDC ACM: Fix NULL pointer dereference
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] CDC ACM: Fix NULL pointer dereference
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] CDC ACM: Fix NULL pointer dereference
  • From: Sven Schnelle <svens@xxxxxxxxxxxxxx>
• [GIT PATCH] USB fixes for 3.6-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] scripts/modpost: add a exception for USB gadget drivers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [BUG] - USB3 bluetooth device not working properly?
  • From: Miroslav Sabljic <miroslav.sabljic@xxxxxxx>
• Re: [PATCH 2/3] usb: dwc3: gadget: implement ->reset notification
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: Question regarding ClearTTBuffer request on closing of USB serial device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: disconnect and uas_work_list
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: [RFC 0/2] USB gadget - configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 2/2] usb: convert USB_QUIRK_RESET_MORPHS to USB_QUIRK_RESET
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 1/2] usb/endpoint: Set release callback in the struct device_type instead of in the device itself directly
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: disconnect and uas_work_list
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Question regarding ClearTTBuffer request on closing of USB serial device
  • From: Antti Pulakka <antti.pulakka@xxxxxxxxx>
• [PATCH V2] ACPI: Allow acpi binding with usb3.0 hub
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH v2 4/8] usb/acpi: Store info on device removability.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 5/8] xhci: Handle clear PORT_POWER feature.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 7/8] usb: Fail a get config when the port is powered off.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 8/8] usb : Add sysfs files to control port power.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 6/8] usb/acpi: Use ACPI methods to power off ports.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 3/8] usb/acpi: Bind ACPI node to USB port, not usb_device.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 2/8] usb: move children to struct usb_port
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 1/8] usb: make usb port a real device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Joel Becker <jlbec@xxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: musb: gadget: implement proper ->reset handling
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [patch] mos7840: fix chars_in_buffer()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH 3/3] usb: musb: gadget: implement proper ->reset handling
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb: gadget: lpc32xx_udc: Port to new start/stop interface
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [RFC/PATCH] usb: gadget: composite: don't call f->set_alt() from USB_REQ_SET_CONFIGURATION
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] scripts/modpost: add a exception for USB gadget drivers
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: disconnect and uas_work_list
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: [RFC 0/2] USB gadget - configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 2/9] scripts/modpost: add a exception for USB gadget drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/9] scripts/modpost: add a exception for USB gadget drivers
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: hcd: use *resource_size_t* for specifying resource data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: hcd: use *resource_size_t* for specifying resource data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] usb/musb/omap2430.c Delete unused variable.
  • From: Matthias Brugger <mbrugger@xxxxxxxxxxx>
• [PATCH] usb/musb/omap2430.c Delete unused variable
  • From: Matthias Brugger <mbrugger@xxxxxxxxxxx>
• Re: [PATCH] usb/musb/omap2430.c Delete unused variable
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Why is lpc32xx_udc still using old style start/stop functions?
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: Why is lpc32xx_udc still using old style start/stop functions?
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [RFC/PATCH] usb: gadget: composite: don't call f->set_alt() from USB_REQ_SET_CONFIGURATION
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH] usb: gadget: composite: don't call f->set_alt() from USB_REQ_SET_CONFIGURATION
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: dwc: Load order of glue diver and core driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH] usb: gadget: composite: don't call f->set_alt() from USB_REQ_SET_CONFIGURATION
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/3] usb: musb: gadget: implement proper ->reset handling
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/3] usb: dwc3: gadget: implement ->reset notification
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/3] usb: gadget: add reset method to struct usb_gadget_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• dwc: Load order of glue diver and core driver
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: Potential fsg->state problem at file_storage.c
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH 0/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: option: add ZTE K5006-Z
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/9] scripts/modpost: add a exception for USB gadget drivers
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 5/9] staging/ccg: initialize ret in functionfs_ready_callback()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/9] usb/gadget: move bind() callback back to struct usb_gadget_driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/9] usb/gadgets: move bind() callback back to struct usb_composite_driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 8/9] usb/gadget: Add I2C dependency for USB_LPC32XX
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 7/9] staging/ccg: Allow to overwrite composite's setup function
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 6/9] usb/gadget: remove global struct usb_composite_driver in composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/9] scripts/modpost: add a exception for USB gadget drivers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 9/9] usb/pxa25x: make it compile with debug again
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/9] gadget/composite: move bind callback into driver struct
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Towards library like fucntionality of composite.c
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] USB: option: add ZTE K5006-Z
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Joe Neo <joeneo@xxxxxx>
• Why is lpc32xx_udc still using old style start/stop functions?
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Greg Kroah-Hartmann <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Removal of ccg
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Prolem of setting DeviceRemovable according ACPI information
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] drivers/usb/host/ohci-platform.c: fix error return code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] drivers/usb/host/ehci-platform.c: fix error return code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Christopher Harvey <charvey@xxxxxxxxxx>
• Re: Removal of ccg
  • From: Greg Kroah-Hartmann <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Potential fsg->state problem at file_storage.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Greg Kroah-Hartmann <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/8] usb/acpi: Bind ACPI node to USB port, not usb_device.
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• [PATCH] USB: option: add ZTE K5006-Z
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net] net: qmi_wwan: new devices: UML290 and K5006-Z
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 3/8] usb/acpi: Bind ACPI node to USB port, not usb_device.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 1/8] usb: make usb port a real device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Removal of ccg
  • From: Greg Kroah-Hartmann <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] input: usb: hid: Bump maximum global item tag report size to 128 bytes
  • From: Marek Vasut <marex@xxxxxxx>
• Potential fsg->state problem at file_storage.c
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: warn about endpoint already enabled before changing ep name
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB interrupt times
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: USB interrupt times
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 2/2] input: usb: hid: Add quirk for Freescale i.MX28 ROM recovery
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Removal of ccg
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] input: usb: hid: Bump maximum global item tag report size to 128 bytes
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH net 0/3] qmi_wwan: simplify device matching and add a few new devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC 0/2] USB gadget - configfs
  • From: Joel Becker <jlbec@xxxxxxxxxxxx>
• Re: gadgetfs, functionfs, composite
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/8] usb/acpi: Bind ACPI node to USB port, not usb_device.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 1/8] usb: make usb port a real device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 3/8] usb/acpi: Bind ACPI node to USB port, not usb_device.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: make usb port a real device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net] net: sierra_net: replace whitelist with ifnumber match
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net 0/3] qmi_wwan: simplify device matching and add a few new devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make handover code more robust
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make handover code more robust
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH] xhci: Make handover code more robust
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• gadgetfs, functionfs, composite
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: USB interrupt times
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• Re: usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• disconnect and uas_work_list
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Prolem of setting DeviceRemovable according ACPI information
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: USB host isochronous transfer broken
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V6 4/5] USB: Add EHCI bus glue for Loongson1x SoCs (UPDATED)
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: USB interrupt times
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: USB interrupt times
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: USB interrupt times
  • From: Jiri Kosina <jkosina@xxxxxxx>
• USB interrupt times
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Laurent Bigonville <l.bigonville@xxxxxxxxx>
• Re: Infinite looping in omap2430.c USB driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] Intel xhci: Only switch the switchable ports
  • From: Keng-Yu Lin <kengyu@xxxxxxxxxxxxx>
• [PATCH 4/5] drivers/usb/host/ohci-platform.c: fix error return code
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 1/5] drivers/usb/gadget/s3c-hsotg.c: fix error return code
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 5/5] drivers/usb/host/ehci-platform.c: fix error return code
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 3/5] drivers/usb/wusbcore/wa-hc.c: fix error return code
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: USB host isochronous transfer broken
  • From: Ruben Jenster <r@xxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: hcd: mark controller's suspend routine as async
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: mxs-phy on i.MX233 not enumerating
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• RE: mxs-phy on i.MX233 not enumerating
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: mxs-phy on i.MX233 not enumerating
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Marek Vasut <marex@xxxxxxx>
• RE: mxs-phy on i.MX233 not enumerating
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: Infinite looping in omap2430.c USB driver
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: mxs-phy on i.MX233 not enumerating
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [patch] xhci: Fix a logical vs bitwise AND bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: usbserial issue
  • From: Guilherme Bedin <gbedin@xxxxxxxxx>
• Re: Prolem of setting DeviceRemovable according ACPI information
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: question concerning finish_port_resume()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Prolem of setting DeviceRemovable according ACPI information
  • From: "Lan, Tianyu" <tianyu.lan@xxxxxxxxx>
• Re: USB host isochronous transfer broken
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Infinite looping in omap2430.c USB driver
  • From: Felipe Balbi <balbi@xxxxxx>
• mxs-phy on i.MX233 not enumerating
  • From: Sean Cross <xobs@xxxxxxxx>
• question concerning finish_port_resume()
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• Re: [PATCH 1/1] usb: hcd: mark controller's suspend routine as async
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH RFC] usb: musb: convert the request_irq of NIrq to devm_*
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH net 0/3] qmi_wwan: simplify device matching and add a few new devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [BUG Report] BUG: unable to handle kernel NULL pointer dereference at
  • From: Liu Bo <liub.liubo@xxxxxxxxx>
• USB host isochronous transfer broken
  • From: Ruben Jenster <r@xxxxxx>
• Re: [BUG Report] BUG: unable to handle kernel NULL pointer dereference at
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 1/1] usb: hcd: mark controller's suspend routine as async
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [BUG Report] BUG: unable to handle kernel NULL pointer dereference at
  • From: Liu Bo <liub.liubo@xxxxxxxxx>
• Re: [RFC ebeam PATCH v2 3/3] input: misc: New USB eBeam input driver.
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] usb/xhci: unify parameter of xhci_msi_irq
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• RE: [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• Re: Infinite looping in omap2430.c USB driver
  • From: NeilBrown <neilb@xxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net] net: sierra_net: replace whitelist with ifnumber match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [Regression, post-3.5] NULL pointer dereference in usb-wwan after resume from system suspend
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH net] net: sierra_net: replace whitelist with ifnumber match
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH net] net: sierra_net: replace whitelist with ifnumber match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net 0/3] qmi_wwan: simplify device matching and add a few new devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net 3/3] net: qmi_wwan: compress device_id list using macros
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net 2/3] net: qmi_wwan: add Sierra Wireless devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net 1/3] net: qmi_wwan: use fixed interface number matching
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Laurent Bigonville <l.bigonville@xxxxxxxxx>
• Re: [Regression, post-3.5] NULL pointer dereference in usb-wwan after resume from system suspend
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Regression, post-3.5] NULL pointer dereference in usb-wwan after resume from system suspend
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Laurent Bigonville <l.bigonville@xxxxxxxxx>
• Re: 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 10 seconds lag when connecting UPS device (usb_submit_urb(ctrl) failed: -1)
  • From: Laurent Bigonville <l.bigonville@xxxxxxxxx>
• Re: DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Nikolai Zhubr <zhubr@xxxxxxxxxx>
• Re: [PATCH] usb: otg: twl4030-usb: spin_unlock_irq in interrupt handler
  • From: Denis <yefremov.denis@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Paul Fertser <fercerpav@xxxxxxxxx>
• Re: DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Paul Fertser <fercerpav@xxxxxxxxx>
• Re: [PATCH] usb: class: Modify printk to pr_info in cdc-acm.c
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• DesignWare USB OTG dwc_otg issues with high-speed hubs
  • From: Paul Fertser <fercerpav@xxxxxxxxx>
• Re: [PATCH] usb-serial: Let usb_serial_port manage port private data to avoid referencing NULL pointer oops
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb-serial: Let usb_serial_port manage port private data to avoid referencing NULL pointer oops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• [PATCH] usb-serial: Let usb_serial_port manage port private data to avoid referencing NULL pointer oops
  • From: Huajun Li <huajun.li.lee@xxxxxxxxx>
• Re: [PATCH] usb: host: tegra: fix warning messages in ehci_remove
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] powerpc/p4080ds: dts - add usb controller version info and port0
  • From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• [PATCH 1/2] powerpc/p4080ds: dts - add usb controller version info and port0
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• [patch] mos7840: fix chars_in_buffer()
  • From: Stas Sergeev <stsp@xxxxxxx>
• RE: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V2] usb/dwc3: Correct cache sync issue in case of ep0 bounced
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH] usb/dwc3: Correct cache sync issue in case of ep0 bounced
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb/dwc3: Correct cache sync issue in case of ep0 bounced
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH] usb/dwc3: Correct cache sync issue in case of ep0 bounced
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH] usb/dwc3: Correct cache sync issue in case of ep0 bounced
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: host: xhci-plat: use ioremap_nocache
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v4 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v4 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v4 3/5] ARM: S3C64XX: Removing old phy setup code
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v4 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• RE: [PATCH v3 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: core: use devm_iremap_nocache() version
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH] usb: host: tegra: fix warning messages in ehci_remove
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 4/4] usb: dwc3: add basic PHY support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 3/4] usb: dwc3: exynos: add nop transceiver support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 2/4] usb: dwc3: omap: add nop transceiver support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/4] usb: dwc3: pci: add nop transceiver support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 4/4] usb: dwc3: add basic PHY support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH] Intel xhci: Only switch the switchable ports
  • From: Keng-Yu Lin <kengyu@xxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] XMOS UAC2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Port power off: ACPI _PLD and other ideas
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• RE: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH/RFC 2/2] usb: gadget: u_ether: Don't change endpoint status in eth_stop()
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [alsa-devel] XMOS UAC2
  • From: "adelias@xxxxxxxxxxx" <adelias@xxxxxxxxxxx>
• Re: [alsa-devel] XMOS UAC2
  • From: Daniel Mack <zonque@xxxxxxxxx>
• USB sound card device complains about "error -28: not enough bandwidth" only on specific PC hardware, seems not kernel specific
  • From: David Ranch <dranch@xxxxxxxxxxx>
• Re: [alsa-devel] XMOS UAC2
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [Pull Request] Intel xHCI bugfixes for 3.6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] xhci: Switch PPT ports to EHCI on shutdown.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] Intel xHCI bugfixes for 3.6
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] Intel xhci: Only switch the switchable ports
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH v2] Intel xhci: Only switch the switchable ports
  • From: Keng-Yu Lin <kengyu@xxxxxxxxxxxxx>
• Re: [Pull Request] xHCI bug fixes for 3.6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 4/4] usb: dwc3: add basic PHY support
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH] Intel xhci: Only switch the switchable ports
  • From: Keng-Yu Lin <kengyu@xxxxxxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• [RFC/PATCH 0/4] DWC3 PHY Support
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 4/4] usb: dwc3: add basic PHY support
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 3/4] usb: dwc3: exynos: add nop transceiver support
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 2/4] usb: dwc3: omap: add nop transceiver support
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 1/4] usb: dwc3: pci: add nop transceiver support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Remote wakeup functionality using gadgetfs.
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v3] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• Re: [PATCH] Intel xhci: Only switch the switchable ports
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1] usb: musb: Make dma_controller_create __devinit
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [RFT] xhci: Switch PPT ports to EHCI on shutdown.
  • From: Denis Turischev <denis@xxxxxxxxxxxxxx>
• Re: [PATCH] Intel xhci: Only switch the switchable ports
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: musb: Free NIrq in a missing error path
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH v2] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• Re: [PATCH v2] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Remote wakeup functionality using gadgetfs.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Remote wakeup functionality using gadgetfs.
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v2] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: composite: parse dt values
  • From: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: composite: parse dt values
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: gadget: composite: parse dt values
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: musb: Free NIrq in a missing error path
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Infinite looping in omap2430.c USB driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• Re: [PATCH RFC] usb: musb: Make dma_controller_create __devinit
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/6] usb: gadget/uvc: Clarify comment about string descriptors
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: phy: mv_u3d: Add usb phy driver for mv_u3d
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [RFC/PATCH v4] usb: dwc3: Introduce OTG driver for dwc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: otg: twl4030-usb: spin_unlock_irq in interrupt handler
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH RFC] usb: musb: Make dma_controller_create __devinit
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] Intel xhci: Only switch the switchable ports
  • From: Keng-Yu Lin <kengyu@xxxxxxxxxxxxx>
• Re: Query: Reset string id during rndis unbind
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• [PATCH v2 2/2] usb: musb: drop is_host_capable() and is_peripheral_capable()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/2] usb: musb: drop useless board_mode usage
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] usb: musb: drop useless board_mode usage
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH/RFC 2/2] usb: gadget: u_ether: Don't change endpoint status in eth_stop()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/6] usb: gadget/uvc: Clarify comment about string descriptors
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb_gadget: use variables according to their names in rxstate()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Query: Reset string id during rndis unbind
  • From: Kernel Newbie <kernelfanatic@xxxxxxxxx>
• RE: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: Port power off: ACPI _PLD and other ideas
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: Port power off: ACPI _PLD and other ideas
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCHv2 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 3/8] serial: vt8500: Add devicetree support for vt8500-serial
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 8/8] arm: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] cdc-phonet: Don't leak in usbpn_open
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.
  • From: Matthew Hall <mhall@xxxxxxxxxxxxxxx>
• RE: Port power off: ACPI _PLD and other ideas
  • From: "Moore, Robert" <robert.moore@xxxxxxxxx>
• Port power off: ACPI _PLD and other ideas
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/4] xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.
  • From: Matthew Hall <mhall@xxxxxxxxxxxxxxx>
• [PATCH 3/4] xhci: Rate-limit XHCI_TRUST_TX_LENGTH quirk warning.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/4] xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/4] xhci: Fix bug after deq ptr set to link TRB.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/4] xhci: Increase reset timeout for Renesas 720201 host.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI bug fixes for 3.6
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Query: Reset string id during rndis unbind
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Kernel oops on usbhid_submit_report
  • From: Amit <amit.uttam@xxxxxxxxx>
• Re: [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• RE: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• [Bug 1006011] 0763:2080 M-Audio Fast Track Ultra on XHCI isn't recognized
  • From: Aurélien Leblond <blablack@xxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: Remote wakeup functionality using gadgetfs.
  • From: Dineshkumar <dsp.dineshkumar@xxxxxxxxx>
• Re: Remote wakeup functionality using gadgetfs.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Remote wakeup functionality using gadgetfs.
  • From: Dineshkumar <dsp.dineshkumar@xxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• xhci inc_deq question
  • From: loody <miloody@xxxxxxxxx>
• [PATCH] wusb: Fix potential memory leak in wusb_dev_sec_add()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Query: Reset string id during rndis unbind
  • From: Kernel Newbie <kernelfanatic@xxxxxxxxx>
• [PATCH] usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/1] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] USB: whci-hcd: Fix potential memory leak in qset_add_urb_sg()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2] usb_gadget: Use GFP_ATOMIC in dma_pool_alloc().
  • From: Vladimir Gratinskiy <gratinskiy@xxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [PATCH v3 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v3 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v3 3/5] ARM: S3C64XX: Removing old phy setup code
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>