With a previous patch to enable the EHCI/XHCI port switching, it switches
all the available ports.
The assumption is not correct because the BIOS may expect some ports
not switchable by the OS.
There are two more registers that contains the information of the switchable
and non-switchable ports.
This patch adds the checking code for the two register so that only the
switchable ports are altered.
Signed-off-by: Keng-Yu Lin <kengyu@xxxxxxxxxxxxx>
---
drivers/usb/host/pci-quirks.c | 27 +++++++++++++++++++++++----
1 file changed, 23 insertions(+), 4 deletions(-)
Correct the comment as suggested by Sarah Sharp.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index df0828c..c5065f8 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
#define NB_PIF0_PWRDOWN_1 0x01100013
#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
static struct amd_chipset_info {
struct pci_dev *nb_dev;
@@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
return;
}
- ports_available = 0xffffffff;
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
- * Register, to turn on SuperSpeed terminations for all
- * available ports.
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
"under xHCI: 0x%x\n", ports_available);
- ports_available = 0xffffffff;
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+ ports_available);
+
/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
* switch the USB 2.0 power and data lines over to the xHCI
* host.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
