Linux USB Users

• Thread Index

• Re: [PATCH] cdc-phonet: Don't leak in usbpn_open
  • From: "Rémi Denis-Courmont" <remi@xxxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Peiyong Feng <peiyong.feng.kernel@xxxxxxxxx>
• [PATCH v3] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax Sadashivpetimath <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• RE: [PATCH v2] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: use DMA mode 1 whenever possible
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Peiyong Feng <peiyong.feng.kernel@xxxxxxxxx>
• Re: [PATCH 2/2] drivers/mmc/host/vub300.c: add missing usb_free_urb
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: Kernel Oops while disconnecting USB peripheral (always)
  • From: Sarbojit Ganguly <unixman.linuxboy@xxxxxxxxx>
• Re: 答复: [PATCH 1/8] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "greg@xxxxxxxxx" <greg@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 3/8] serial: vt8500: Add devicetree support for vt8500-serial
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: usb device getting disconnected
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• RE: usb device getting disconnected
  • From: Sadasivan Shaiju <sshaiju@xxxxxxxxxx>
• Re: [PATCH 1/8] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "greg@xxxxxxxxx" <greg@xxxxxxxxx>
• Re: [PATCH 7/26] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "greg@xxxxxxxxx" <greg@xxxxxxxxx>
• Re: [GIT PULL] usb: fixes for v3.6-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] cdc-phonet: Don't leak in usbpn_open
  • From: Jesper Juhl <jj@xxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Backfilling USB-3 support into the 2.6.27.7 kernel
  • From: Ian Atkin <ian.atkin@xxxxxxxxxxx>
• Re: Backfilling USB-3 support into the 2.6.27.7 kernel
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Backfilling USB-3 support into the 2.6.27.7 kernel
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFT] xhci: Switch PPT ports to EHCI on shutdown.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] xhci: EHCI/XHCI ports switching on Intense-PC.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: use native print_hex_dump_bytes()
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: host: mips: sead3: Update for EHCI register structure.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Remove redundant if statement
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: use DMA mode 1 whenever possible
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] usb: gadget: use native print_hex_dump_bytes()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: sparse fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: [PATCH V2 1/2] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH RFC] usb: musb: Make dma_controller_create __devinit
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC] usb: otg: Remove the unneeded NULL check
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC] usb: musb: Free NIrq in a missing error path
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC] usb: musb: Prevent the masking of the return value
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 2/2 v2] usb: musb: Remove redundant if statement
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/2] usb: musb: Remove redundant if statement
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] usb: musb: Remove redundant if statement
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/2] usb: musb: use DMA mode 1 whenever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] usb/dwc3: Correct missed isoc when endpoint is busy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb/dwc3: Correct missed isoc when endpoint is busy
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] usb/dwc3: Correct missed isoc when endpoint is busy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH RFC] usb: musb: use DMA mode 1 whenever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH RFC] usb: musb: use DMA mode 1 whenever possible
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH RFC] usb: musb: use DMA mode 1 whenever possible
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH RFC] usb: musb: use DMA mode 1 whenever possible
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATH] usb:musb fix musb_start_urb Oops
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb/dwc3: Correct missed isoc when endpoint is busy
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH] usb: host: xhci: sparse fixes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: musb: fix sparse warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH] usb: host: mips: sead3: Update for EHCI register structure.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax Sadashivpetimath <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [RFC ebeam PATCH v3 1/2] hid: Blacklist new eBeam classic device
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [RFC ebeam PATCH v3 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [PATCH v2 4/5] ARM: S3C64XX: Enabling samsung_usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v2 5/5] ARM: Exynos4210: Enabling samsung_usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v2 3/5] ARM: S3C64XX: Removing old phy setup code
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v2 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH V2] usb/dwc3: Send DEPCFG with "Config Action: Modify" after conndone
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: dwc3: gadget: Fix sparse warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: EXYNOS: Add USB HSIC device
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• [PATCH V2] usb/dwc3: Send DEPCFG with "Config Action: Modify" after conndone
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Peiyong Feng <peiyong.feng.kernel@xxxxxxxxx>
• Re: [RFC ebeam PATCH v3 1/2] hid: Blacklist new eBeam classic device
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC ebeam PATCH v3 0/2]
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [RFC ebeam PATCH v3 2/2] input: misc: New USB eBeam input driver.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC ebeam PATCH v3 1/2] hid: Blacklist new eBeam classic device
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC][PATCH 4/4] usb: host: ohci-platform: add platform specific power callback
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [RFC][PATCH 3/4] usb: host: ehci-platform: add platform specific power callback
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [RFC][PATCH 2/4 v4] usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [RFC][PATCH 1/4 v4] usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [RFC][PATCH 0/4 v4] usb: host: ehci-platform: add platform specific .power callback
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: [RFC ebeam PATCH v3 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• [PATCH] usb: host: mips: sead3: Update for EHCI register structure.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [RFC ebeam PATCH v3 0/2]
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC ebeam PATCH v3 1/2] hid: Blacklist new eBeam classic device
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC ebeam PATCH v3 0/2]
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v3 2/2] input: misc: New USB eBeam input driver.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v3 1/2] hid: Blacklist new eBeam classic device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC ebeam PATCH v3 2/2] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v3 1/2] hid: Blacklist new eBeam classic device
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v3 0/2]
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: Runtime PM defaults for USB hosts
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Runtime PM defaults for USB hosts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb/host/ohci-tmio.c:105: bad switch statement
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usb/host/ohci-tmio.c:105: bad switch statement
  • From: David Binderman <dcb314@xxxxxxxxxxx>
• Runtime PM defaults for USB hosts
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/dwc3: Correct DEPCFG for Config Action "Modify"
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2]staging "usbip" Fix typos.
  • From: "Justin P. Mattock" <justinmattock@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 3/4 v3] usb: host: ehci-platform: add platform specific power callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/4 v3] usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: EXYNOS: Add USB HSIC device
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• Re: [PATCH] usb/dwc3: Correct DEPCFG for Config Action "Modify"
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 0/2] omap: add ocp2scp as a bus driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Linux 3.2: USB mouse not recognized after resuming from suspend to RAM
  • From: Paul Menzel <paulepanter@xxxxxxxxxxxxxxxxxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v7 2/7] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 3/7] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 5/7] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 0/7] omap: musb: Add device tree support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 4/7] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 7/7] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 6/7] drivers: usb: musb: Add device tree support for omap musb glue
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC/PATCH v4] usb: dwc3: Introduce OTG driver for dwc3
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• Re: [PATCH] usb/dwc3: Correct DEPCFG for Config Action "Modify"
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 0/2] omap: add ocp2scp as a bus driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Felipe Balbi <balbi@xxxxxx>
• [BUG] Kernel panic when try s3c-hsotg.c with kernel 3.5
  • From: Peiyong Feng <peiyong.feng.kernel@xxxxxxxxx>
• [PATCH] usb/dwc3: Correct DEPCFG for Config Action "Modify"
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer
  • From: Ying Xue <ying.xue@xxxxxxxxxxxxx>
• Re: [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v6 00/11] omap: musb: Add device tree support
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v6 00/11] omap: musb: Add device tree support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC][PATCH 1/4 v3] usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [RFC][PATCH 1/4 v3] usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH 2/2] usb: renesas_usbhs: fixup resume method for autonomy mode
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 1/2] usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 0/2] usb: renesas_usbhs: bugfix patches
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH v2] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• [PATCH] gpu/mfd/usb: Fix USB randconfig problems
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC][PATCH 4/4 v3] usb: host: ohci-platform: add platform specific power callback
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• [RFC][PATCH 3/4 v3] usb: host: ehci-platform: add platform specific power callback
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• [RFC][PATCH 2/4 v3] usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• [RFC][PATCH 1/4 v3] usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: [RFC][PATCH 0/4 v3] usb: host: ehci-platform: add platform specific .power callback
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• Re: [PATCH 2/2] input: usb: hid: Add quirk for Freescale i.MX28 ROM recovery
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 2/2] input: usb: hid: Add quirk for Freescale i.MX28 ROM recovery
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] input: usb: hid: Bump maximum global item tag report size to 128 bytes
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Continuous stream of small bulk transfers hangs on OHCI-based system
  • From: Tomas Sokorai <tsokorai@xxxxxxxxx>
• Re: Does larger than 32 bits report size is supported at HID?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: BUG: unable to handle kernel paging request in usb_match_id()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: Does larger than 32 bits report size is supported at HID?
  • From: Marek Vasut <marex@xxxxxxx>
• RE: Does larger than 32 bits report size is supported at HID?
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• BUG: unable to handle kernel paging request in usb_match_id()
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• [PATCH v2] musb: Fix bad call to kfree() in musb_free
  • From: Brian Downing <bdowning@xxxxxxxxx>
• Re: USB UPS slows boot
  • From: James <bjlockie@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] musb: Fix bad call to kfree() in musb_free
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Does larger than 32 bits report size is supported at HID?
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: USB UPS slows boot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB UPS slows boot
  • From: James <bjlockie@xxxxxxxxx>
• [PATCH] musb: Fix bad call to kfree() in musb_free
  • From: Brian Downing <bdowning@xxxxxxxxx>
• Re: [PATCH] cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: USB UPS slows boot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB UPS slows boot
  • From: James <bjlockie@xxxxxxxxx>
• Re: [PATCH 3/3] usb: gadget/uvc: Add fix for UVC compliance test suite's assertion 6.1.25 failure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• Re: FW: FW: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• Re: association of USB device and SCSI host in uas
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: FW: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• association of USB device and SCSI host in uas
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Build regressions/improvements in v3.5
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH 1/3] usb: gadget/uvc: Fix 'Illegal endpoint address 0x80' issue for VC Endpoint
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: [PATCH 2/3] usb: gadget/uvc: Add fix for UVC compliance test suite assertion 6.3.90 failure
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: [PATCH 3/3] usb: gadget/uvc: Add fix for UVC compliance test suite's assertion 6.1.25 failure
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: Query regarding the support and testing of MJPEG frame type in the UVC webcam gadget
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: [PATCH V2 2/2] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: mat brown <mat@xxxxxxxxx>
• Re: [RFC ebeam PATCH v2 3/3] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [PATCH 3/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: René Bürgel <rene.buergel@xxxxxxxxx>
• Re: [PATCH 2/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: René Bürgel <rene.buergel@xxxxxxxxx>
• Re: [RFC][PATCH 1/2 v2] usb: host: ehci-platform: add platform specific .power callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3]: ezusb: remove dependency to usb_serial interface
  • From: René Bürgel <rene.buergel@xxxxxxxxx>
• [PATCH 0/3]: ezusb cleanup, FX2 support, firmware downloading support
  • From: René Bürgel <rene.buergel@xxxxxxxxx>
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: kernel panic when called usb_control_msg()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: mat brown <mat@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2 v2] usb: host: ehci-platform: add platform specific .power callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Build regressions/improvements in v3.5
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB3 supercomputer [off topic]
  • From: Alexey Filin <alexey.bubo@xxxxxxxxx>
• Re: [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 08/11] arm/dts: Add twl4030-usb data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] OMAP4: otg: phy: fix charger detection
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• Re: [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 06/11] arm/dts: Add twl6030-usb data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v2 3/3] input: misc: New USB eBeam input driver.
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [RFC ebeam PATCH v2 0/3] new USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v5 0/3] imx: add usbmisc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [GIT PULL] usb: fixes for v3.6-rc1
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP4: otg: phy: fix charger detection
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: "B, Ravi" <ravibabu@xxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [PATCH V2 2/2] usb: add decriptor of persist fail for some morph usb devices
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V2 1/2] usb: Rename temp variable "config" to "val" in the set_avoid_reset_quirk()
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP4: otg: phy: remove uggly mdelay(200)
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• Re: [PATCH V2 2/2] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Query regarding the support and testing of MJPEG frame type in the UVC webcam gadget
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: gadget/uvc: Add fix for UVC compliance test suite's assertion 6.1.25 failure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget/uvc: Add fix for UVC compliance test suite assertion 6.3.90 failure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: gadget/uvc: Fix 'Illegal endpoint address 0x80' issue for VC Endpoint
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• Re: Kernel panic when called usb_control_msg()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] OMAP4: otg: phy: remove uggly mdelay(200)
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• kernel panic when called usb_control_msg()
  • From: y b <ycbzzjlby@xxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: mat brown <mat@xxxxxxxxx>
• [RFC][PATCH 2/2 v2] usb: host: ohci-platform: add platform specific .power callback
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• [RFC][PATCH 1/2 v2] usb: host: ehci-platform: add platform specific .power callback
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH v2] usb: host: ehci-platform: add pm_runtime_xx()
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: "B, Ravi" <ravibabu@xxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: "B, Ravi" <ravibabu@xxxxxx>
• 090c:1000 file transfer to/from USB 2.0 flash drive, via 3.0 port at best 50-60 Mb/s
  • From: mat brown <mat@xxxxxxxxx>
• Re: FW: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• Re: [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: gadgetfs w/ multithreading and blocking I/O fails USB-IF Ch9 Halt Endpoint Test
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Joao Bonina <bonina_2001@xxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: gadgetfs w/ multithreading and blocking I/O fails USB-IF Ch9 Halt Endpoint Test
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC ebeam PATCH v2 0/3] new USB eBeam input driver
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [RFC ebeam PATCH v2 3/3] input: misc: New USB eBeam input driver.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v2 0/3] new USB eBeam input driver
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v2 1/3] hid: hid-ids.h: Add vendor and device ID for eBeam classic device.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• [RFC ebeam PATCH v2 2/3] hid: hid-core.c: Blackist eBeam classic device.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• RE: [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• Re: [PATCH] cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN
  • From: Peter Meiser <meiser@xxxxxxxxxxxxxx>
• RE: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: "B, Ravi" <ravibabu@xxxxxx>
• [PATCH v7 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 07/11] usb: otg: nop: add dt support
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 01/11] usb: musb: add musb_ida for multi instance support
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 03/11] usb: musb: am335x: add support for dual instance
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 00/11] usb: musb: adding multi instance support
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 02/11] usb: musb: kill global and static for multi instance
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 10/11] usb: musb: dsps: get the PHY using phandle api
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 09/11] usb: musb: dsps: remove explicit NOP device creation
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 05/11] usb: musb: dsps: add dt support
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v7 11/11] arm/dts: am33xx: add phy phandle to usbss
  • From: Ravi Babu <ravibabu@xxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• RE: [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• new device for qmi_wwan and option Vodafone/ZTE K5006Z
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• [PATCH] drivers: usb: musb: cleanup while removing musb omap glue driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: OMAP3: USB: EHCI broken on 3.5?
  • From: "Joe Woodward" <jw@xxxxxxxxxxxxxx>
• [PATCH RFC] usb: musb: use DMA mode 1 whenever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• [PATCH 1/8] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH 0/7 v2] usb: gadget: mv_udc: bug fix and feature add
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH] usb:musb:musb_host: Handle highmem in PIO mode
  • From: Virupax Sadashivpetimath <virupax.sadashivpetimath@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• gadgetfs w/ multithreading and blocking I/O fails USB-IF Ch9 Halt Endpoint Test
  • From: "Dan Rittersdorf" <DRittersdorf@xxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• Re: XHCI mem clean up Crash on 3.4 kernel
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB UPS slows boot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB UPS slows boot
  • From: bjlockie@xxxxxxxxx
• XHCI mem clean up Crash on 3.4 kernel
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: [PATCH] usb, ehci: Avoid deadlock of ehci->lock by disabling interrupts
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: USB UPS slows boot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: [PATCH] usb, ehci: Avoid deadlock of ehci->lock by disabling interrupts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• RE: Query regarding the support and testing of MJPEG frame type in the UVC webcam gadget
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: [PATCH V2 2/2] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• [PATCH] usb: storage: stop all current urbs when device is disconnected
  • From: Ravi Babu <ravibabu@xxxxxx>
• RE: [PATCH 0/6] UVC gadget cleanup
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: [PATCH 0/6] UVC gadget cleanup
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Query regarding the support and testing of MJPEG frame type in the UVC webcam gadget
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH 0/6] UVC gadget cleanup
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: [PATCH V2 2/2] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 4/6] usb: gadget/uvc: Merge the SS/HS/FS status endpoint descriptors
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/6] usb: gadget/uvc: Rename STATUS_BYTECOUNT to UVC_STATUS_MAX_PACKET_SIZE
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 3/6] usb: gadget/uvc: Fix coding style issues introduced by SS support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: Exynos4210: Enabling sec_usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH 4/5] ARM: S3C64XX: Enabling sec_usbphy driver
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH 5/6] usb: gadget/uvc: Merge the streaming maxpacket and mult parameters
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 6/6] usb: gadget/uvc: Configure the streaming endpoint based on the speed
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: S3C64XX: Removing old phy setup code
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH 1/6] usb: gadget/uvc: Clarify comment about string descriptors
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/6] UVC gadget cleanup
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH] update MAINTAINERS
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: [PATCH v6 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [PATCH v6 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Joao Bonina <bonina_2001@xxxxxxxxx>
• Re: [PATCH v4 0/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• [PATCH v5 1/3] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v5 3/3] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v5 2/3] ARM: imx6q: clk_register_clkdev usbmisc clock
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v5 0/3] imx: add usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: (Query): [PATCH v4 2/4] usb gadget: Configure endpoint according to gadget speed.
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH v4 1/3] USB: chipidea: add imx usbmisc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• RE: [RFC/PATCH v3] usb: dwc3: Introduce OTG driver for dwc3
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• Query regarding the support and testing of MJPEG frame type in the UVC webcam gadget
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: USB UPS slows boot
  • From: James <bjlockie@xxxxxxxxx>
• [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v4 2/3] ARM: imx6q: clk_register_clkdev usbmisc clock
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v4 1/3] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v4 0/3] imx: add usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 1/8] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: Problems with a Zytronic touchscreen on kernel 3.5 (USB ID 0x14c8:0x0005) - regression from kernel 3.0
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "'Greg KH'" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: "Alexis R. Cortes" <alexis.cortes@xxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb, ehci: Avoid deadlock of ehci->lock by disabling interrupts
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
  • From: Alexis Cortes <x0095842@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] xhci: EHCI/XHCI ports switching on Intense-PC.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Problems with a Zytronic touchscreen on kernel 3.5 (USB ID 0x14c8:0x0005) - regression from kernel 3.0
  • From: Simon Farnsworth <simon.farnsworth@xxxxxxxxxxxx>
• Re: bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] xhci: EHCI/XHCI ports switching on Intense-PC.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: add pm_runtime_xx()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: Change persist_enabled when attribute avoid_reset_quirk is modified
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH v6 03/11] usb: musb: am335x: add support for dual instance
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [PATCH v6 03/11] usb: musb: am335x: add support for dual instance
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: echi-dbgp: increase the controller wait time to come out of halt.
  • From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Joao Bonina <bonina_2001@xxxxxxxxx>
• Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v3] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] xhci: EHCI/XHCI ports switching on Intense-PC.
  • From: Denis Turischev <denis@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: Take attribute avoid_reset_quirk out of usb device's attribute group
  • From: Bjørn Mork <bjorn@xxxxxxx>