Re: [PATCH 1/2] OMAP4: otg: phy: fix charger detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Jul 5, 2012 at 2:12 PM, Ruslan Bilovol <ruslan.bilovol@xxxxxx> wrote:
> Charger detection feature is not correctly used
> and thus makes some regressions if OTG was used in
> the host mode. Charger detection takes 500 ms so
> if some device is attached to the host after 500 ms
> it will be suddenly resetted.
>
> This feature is enabled by default after reset/cold boot
> so always affects PHY usage. So finally this was wrongly
> interpreted as "phy requires 200ms to start".
> After fixing this we can safely remove uggly mdelay after
> powering on the PHY.
>
> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
> ---
>  arch/arm/mach-omap2/omap_phy_internal.c |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
> index d52651a..a13a37c 100644
> --- a/arch/arm/mach-omap2/omap_phy_internal.c
> +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> @@ -42,12 +42,16 @@
>  #define        SESSEND                         BIT(3)
>  #define        IDDIG                           BIT(4)
>
> +#define CONTROL_USB2PHYCORE            0x620
> +#define USB2PHY_DISCHGDET              BIT(30)
> +
>  static struct clk *phyclk, *clk48m, *clk32k;
>  static void __iomem *ctrl_base;
>  static int usbotghs_control;
>
>  int omap4430_phy_init(struct device *dev)
>  {
> +       u32 usb2phycore;
>         ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
>         if (!ctrl_base) {
>                 pr_err("control module ioremap failed\n");
> @@ -56,6 +60,11 @@ int omap4430_phy_init(struct device *dev)
>         /* Power down the phy */
>         __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
>
> +       /* Disable charger detection by default */
> +       usb2phycore = omap4_ctrl_pad_readl(CONTROL_USB2PHYCORE);
> +       usb2phycore |= USB2PHY_DISCHGDET;
> +       omap4_ctrl_pad_writel(usb2phycore, CONTROL_USB2PHYCORE);

Maybe I failed to understand correctly but the $subject says it
*fixes* charger detection but the patch *disables* charger detection.

-Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux