Hi, On Mon, Jul 30, 2012 at 02:39:49PM +0530, Kishon Vijay Abraham I wrote: > This patch series adds device tree support for MUSB and device > tree support for all the related modules to get MUSB working in > OMAP platform. > > A new omap-usb2 phy driver has been added (with only dt suppport) > to perform phy configurations. Previously this configuration was > performed by twl6030, using pdata function pointers. > > With the addition of omap-usb2 to perform phy configurations, > twl6030 is made as a comparator driver to detect VBUS and ID events > and notify it to the glue layer. > > musb core is _NOT_ yet converted to support device tree support as it > would need lot of driver re-design because of its enormous use of > function pointers. That will be in _TO DO_ list. > > Changes from v5: > minor cleanups like checking for return value in get_sync and few changes > in the documentation has been done. > > Changes from v4: > duplicate getting of 'mode' property is removed in omap-musb glue. > > Changes from v3: > remove the address in the node name of usb_otg_hs since the usb_otg_hs > node doesn't have a reg property. Thanks Ajay Gupta for finding this. > > Changes from v2: > Fixed Sergei's comment to remove *0x* prefix in usb2phy@0x4a0ad080 > > Changes from v1: > * Fixed Rajendra Nayak comments (regulator naming, compatible naming of > musb and other minor cleanups.) > * It's agreed to have ocp2scp in drivers/bus and usb2 phy is a child of > ocp2scp, the documentation is updated accordingly. > > Changes from RFC: > Removed the dependency on [RFC PATCH 00/11] OMAP System Control Module. > Writing to control module register is now handled in otg driver itself. > Once the system control module driver get upstreamed, I'll send a patch > to make use of API's in control module driver to write to control > module register. > > This series was developed on > git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv > > This patch series depends on > [PATCH 0/2] omap: add ocp2scp as a bus driver > > Performed MUSB device mode testing on OMAP4 panda, OMAP4 SDP > and OMAP3 beagle. > > Kishon Vijay Abraham I (11): > drivers: usb: otg: add a new driver for omap usb2 phy > arm/dts: omap: Add omap-usb2 dt data > drivers: usb: otg: make twl6030_usb as a comparator driver to > omap_usb2 > arm: omap: hwmod: add a new addr space in otg for writing to control > module > drivers: usb: twl6030: Add dt support for twl6030 usb > arm/dts: Add twl6030-usb data > drivers: usb: twl4030: Add device tree support for twl4030 usb > arm/dts: Add twl4030-usb data > drivers: usb: musb: Add device tree support for omap musb glue > arm/dts: omap: Add usb_otg and glue data > arm: omap: phy: remove unused functions from omap-phy-internal.c When you send your next series, can you please split the stuff based on their dependencies or at least note here what depends on what ? I mean, I cannot take the DT patches without an Acked-by Grant and Tony, but the drivers themselves I could take queue them since they're already in good shape ;-) Maybe just start the series with patches without dependencies on one another, and the rest of the series would be ones that need to go together, or something. That'll help me ;-) -- balbi
Attachment:
signature.asc
Description: Digital signature
