On 08/01/12 13:14, Alan Stern wrote: > On Wed, 1 Aug 2012 bjlockie@xxxxxxxxx wrote: > >>> That's progress. Have you checked to see whether ehci-hcd is loaded >>> before or after ohci-hcd? >> >> Is there a way to tell besides watching the screen (which scrolls too >> fast) during boot? > > Run the dmesg command. > >>> Have you checked to see whether the disconnects occur if you plug the >>> UPS in after the system has booted? >> >> It does but there were only 2 last time (before it was alot more). > > That's still more than there should be. However, it seems clear that > the problem lies in your UPS device. At least it's not slowing down > your boot time any more. > > Alan Stern Maybe the pause is not USB. [ 2.243856] usb 4-1: Manufacturer: Logitech [ 62.739097] cx25840 6-0044: unable to open firmware v4l-cx23885-avcore-01.fw I unplugged my UPS. I run NUT which is software to manage UPS and when I stopped it I noticed infinite disconnect/connects. When the software runs there are only a few disconnects until the software hooks to it (theory). Anyways, I put all of my dmesg at: http://pastebin.com/FhCAbc7A -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
