Linux IDE
[Prev Page][Next Page]
- Re: [patch 03/11] Optional LED trigger for libata,
Jeff Garzik
- Re: HPT366 not enabled by kernel 2.6.21.2,
Bartlomiej Zolnierkiewicz
- 2.6.22-rc2: known regressions with patches,
Michal Piotrowski
- Intel AHCI generating spurious completions during NCQ errors,
Paul Erkkila
- libata interface fatal error,
Florian Effenberger
- software raid faster than raw disk?,
Siim Vahtre
- Re: JMicron JMB363 issue fixed / ICH8 RAID volume trace,
Andrew Paprocki
- [PATCH 2.6.22-rc2] libata: sata_sis fixes,
Uwe Koziolek
- [BUG] 2.6.21.1: ide-pci is not finding ide controller.,
Linas Vepstas
- [PATCH] Be more paranoid about controller setup and initial setup (for testing),
Alan Cox
- [PATCH] libata: don't consider 0xff as port empty if SStatus is available,
Tejun Heo
- [PATCH] ata: pata_platform: Disable prereset logic.,
Paul Mundt
- sata_mv driver,
Wakko Warner
- new libata-code breaks functionality of sata_sis,
Uwe Koziolek
- Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4,,
Mikael Pettersson
- Re: [PATCH] ahci: disable 64bit dma on sb600,
Srihari Vijayaraghavan
- JMicron JMB361 sporadically failing to initialize from at least 2.6.18.4 to 2.6.22-rc2,
Andrew Paprocki
- [git patches] libata fixes and administrivia,
Jeff Garzik
- [patch 12/69] sata_via: add missing PM hooks,
Chris Wright
- [PATCH] libata: replace ap->cbl tests with ATA_FLAG_SATA tests,
Tejun Heo
- Add Seagate STT20000A to DMA blacklist.,
Dave Jones
- [PATCH] libata: Allow a controller specific post bus reset method,
Alan Cox
- [PATCH] libata: Kiss post_set_mode goodbye,
Alan Cox
- [PATCH] ata_piix: clean up,
Alan Cox
- [PATCH] libata: Handle SATA bridges better,
Alan Cox
- [PATCH] pata_sis: Fix and clean up some timing setups,
Alan Cox
- [PATCH] hpt3x2n: Correct revision boundary,
Alan Cox
- [PATCH] pata_hpt366: Enable bits are unreliable so don't use them,
Alan Cox
- [PATCH] ata_piix: add short 40c quirk for Acer Aspire 2030,
Tejun Heo
- sata via lockups,
Michal Suchanek
- Re: something strange in libata-core.c for kernel 2.6.22-rc3,
Robert Hancock
- Re: sd_resume redundant? [was: [PATCH] libata: implement ata_wait_after_reset()],
Randy Dunlap
- Re: [3/5] 2.6.22-rc2: known regressions,
Michal Piotrowski
- [PATCH] pata_sil680: compile fix,
Tejun Heo
- [PATCH] ahci: add Marvell support (WIP),
Jeff Garzik
- [PATCH] sata_mv: new exception handling (hotplug, NCQ framework),
Jeff Garzik
- [PATCH] sata_sil: Greatly improve DMA support,
Jeff Garzik
- [PATCH/REDIFF] Cleanup libata HPA support,
Ben Collins
- RE: [PATCH] drivers/ata: Add the SW NCQ support to sata_nv for MCP51/MCP55/MCP61,
Kuan Luo
- [PATCH] Add two missing chipsets to drivers/ide/ide-proc.c,
Mika Kukkonen
- sata_promise driver failed with Promise SATA300 TX4,
Theo Baumgartner
- [PATCH] libata: remove libata.spindown_compat,
Tejun Heo
- [PATCH] ide.c: microscopic size and readability optimization,
Borislav Petkov
- sata_via, 2.6.22-rc1, VT6421A,
Tim Valenzuela
- Re: [2/3] 2.6.22-rc1: known regressions v2,
Michal Piotrowski
- 2.6.22-rc1-mm1: IDE compile error,
Adrian Bunk
- SATA intel High loads due to writes vs ata_piix switch,
Fortier,Vincent [Montreal]
- [PATCH] ide/pci/serverworks.c: Fix corruption/timeouts with MegaIDE in RAID mode,
Alan Cox
- [PATCH/RFC 0/8] libata: delegate irq driven pio to workqueue (take 2),
Albert Lee
- =?utf-7?b?K0FGcy1QQVRDSCAzLzQrQUYwLWFkZCB0aGUgSURFIGRldmljZSBJRA==?==?utf-7?b?IGZvciBBVEkgU0I3MDA=?=,
Henry Su
- =?utf-7?b?K0FGcy1QQVRDSCAyLzQrQUYwLSBhZGQgdGhlIElERSBhbmQgU0FUQQ==?==?utf-7?b?IGRldmljZSBJRHMgZm9yIEFUSSBTQjcwMC4=?=,
Henry Su
- =?utf-7?b?K0FGcy1QQVRDSCAxLzQrQUYwLSBhZGQgdGhlIFNNQnVzIGRldmljZQ==?==?utf-7?b?IElEIGZvciBBVEkgU0I3MDA=?=,
Henry Su
- Re: [PATCH] drivers/ata: correct a wrong free function for sata_nv driver,
Jeff Garzik
[git patches] IDE updates/fixes,
Bartlomiej Zolnierkiewicz
Re: [PATCH]add the IDE device ID for ATI SB700,
Bartlomiej Zolnierkiewicz
Serial ATA (SATA) shutdown info,
Scott James Remnant
Re: IT821x: no DMA since 2.6.21,
Alan Cox
[PATCH] libata: track spindown status and skip spindown_compat if possible,
Tejun Heo
[PATCH] libata: Add MMIO support to pata_sil680,
Benjamin Herrenschmidt
Fixing halt/shutdown for libata spindown handling,
Daniel Drake
[PATCH] libata: add human-readable error value decoding (v2),
Robert Hancock
[PATCHSET] libata: improve ATA ACPI support, take#3,
Tejun Heo
- [PATCH 1/9] libata: separate out ata_dev_reread_id(),
Tejun Heo
- [PATCH 2/9] libata: during revalidation, check n_sectors after device is configured,
Tejun Heo
- [PATCH 3/9] libata-acpi: add ATA_FLAG_ACPI_SATA port flag,
Tejun Heo
- [PATCH 4/9] libata-acpi: implement ata_acpi_associate(),
Tejun Heo
- [PATCH 6/9] libata-acpi: miscellaneous cleanups,
Tejun Heo
- [PATCH 7/9] libata: reimplement ACPI invocation,
Tejun Heo
- [PATCH 8/9] libata-acpi: remove redundant checks,
Tejun Heo
- [PATCH 9/9] libata-acpi: implement _GTM/_STM support,
Tejun Heo
- [PATCH 5/9] libata-acpi: clean up ata_acpi_exec_tfs(),
Tejun Heo
- Re: [PATCHSET] libata: improve ATA ACPI support, take#3,
Alan Cox
Libata state machine error in 2.6.18.1,
Rune Torgersen
[PATCH] libata: fix shutdown warning message printing,
Tejun Heo
[PATCH 2/5] Use mutex instead of semaphore in IDE driver,
Matthias Kaehlcke
[1/2] 2.6.22-rc1: known regressions,
Michal Piotrowski
Re: [2.6.21.1] SATA freeze,
Robert Hancock
ata/scsi crash on halt,
Andrew Morton
[PATCH] pasemi: electra IDE/pata_platform glue,
Olof Johansson
[PATCH] HPA Detect From Resume,
Lee Trager
ICH7 and SATAII,
Martin Diakov
[PATCH] libata: give devices one last chance even if recovery failed with -EINVAL,
Tejun Heo
sata_mv hotplug status?,
Tomasz Chmielewski
[PATCH/RFC] Fix build failure for drivers/ata/pata_scc.c,
Tony Breeds
[PATCH] drivers/ata/pata_hpt37x.c Remove unused static variable.,
Tony Breeds
[patch 19/20] SCSI: save disk in scsi_device,
akpm
[patch 20/20] libata: send event when AN received,
akpm
[patch 18/20] genhd: send async notification on media change,
akpm
[patch 1/2] sl82c105: Switch to ref counting API,
akpm
[patch 2/2] Use menuconfig objects: IDE,
akpm
[patch 07/20] pata_pcmcia: recognize 2GB CompactFlash from Transcend,
akpm
[patch 11/20] libata: add support for ATA_16 on ATAPI,
akpm
[patch 13/20] Use menuconfig objects: libata,
akpm
[patch 09/20] Add the combined mode for ATI SB700,
akpm
[patch 17/20] libata: expose AN to user space,
akpm
[patch 12/20] libata-core: convert to use cancel_rearming_delayed_work(),
akpm
[patch 15/20] genhd: expose AN to user space,
akpm
[patch 10/20] add the ATI SB700 SATA controller device id to AHCI pci table,
akpm
[patch 16/20] scsi: expose AN to user space,
akpm
[patch 04/20] pata_acpi: restore driver,
akpm
[patch 14/20] libata: check for AN support,
akpm
[patch 05/20] pata_acpi-restore-driver versus libata-clean-up-sff-init-mess,
akpm
[patch 02/20] libata: clean up SFF init mess,
akpm
[patch 06/20] Optional LED trigger for libata,
akpm
[patch 08/20] drivers/ata: remove the wildcard from sata_nv driver,
akpm
[patch 01/20] git-libata-all: sata_via build fix,
akpm
[patch 03/20] libata-acpi: add infrastructure for drivers to use _GTM/_STM methods,
akpm
sata_promise: which version/patch to test?,
Peter Favrholdt
Device Support,
Theo Baumgartner
HDIO_DRIVE_CMD and hdparm,
Geert Uytterhoeven
libata reset-seq merge broke sata_sil on sh,
Paul Mundt
[PATCH] pata_platform: don't use generic ata_port_start,
Olof Johansson
[PATCH] libata: add human-readable error value decoding,
Robert Hancock
[git patches] libata fixes, minor updates,
Jeff Garzik
[patch 0/7] Asynchronous Notification for ATAPI devices (resend),
Kristen Carlson Accardi
[git patches] IDE update,
Bartlomiej Zolnierkiewicz
Re: [git patches] IDE update,
Jeff Garzik
<Possible follow-ups>
[git patches] IDE update,
Bartlomiej Zolnierkiewicz
[PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2,
Tejun Heo
=?utf-7?b?K0FGcy1wYXRjaCtBRjAtIEFkZCB0aGUgZGV2aWNlIElEcyBmb3IgQQ==?==?utf-7?b?TUQvQVRJIFNCNzAw?=,
Henry Su
Possible Bug in sata_via when trying to burn,
Dominik Schulz
[PATCH] drivers/ata/pata_scc.c: compile error fix,
Akira Iguchi
[PATCH] pata_pcmcia.c: add card ident for jvc cdrom,
Richard Kennedy
[PATCH] Cleanup libata HPA support,
Ben Collins
[git patches] libata reset sequence update,
Jeff Garzik
[PATCH] libata: disable_irq() during polling IDENTIFY,
Albert Lee
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Tejun Heo
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Alan Cox
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Albert Lee
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Tejun Heo
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Albert Lee
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Tejun Heo
- [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Albert Lee
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Tejun Heo
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Alan Cox
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Tejun Heo
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Alan Cox
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Tejun Heo
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Alan Cox
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Alan Cox
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Tejun Heo
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Albert Lee
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2),
Jeff Garzik
- [PATCH/RFC 0/7] libata: push part of irq driven pio to workqueue,
Albert Lee
- [PATCH 1/7] libata: set the state after "PIO data-in" to HSM_ST_IDLE instead of HSM_ST_LAST,
Albert Lee
- [PATCH 2/7] libata: move the ata_altstatus() in ata_hsm_qc_complete(),
Albert Lee
- [PATCH 3/7] libata: move ata_altstatus() out to the pio data xfer functions,
Albert Lee
- [PATCH 4/7] libata: move polling idle irq check to ata_host_intr(),
Albert Lee
- [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Albert Lee
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Tejun Heo
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Tejun Heo
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Tejun Heo
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Tejun Heo
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Tejun Heo
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Tejun Heo
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Alan Cox
- Re: [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions,
Albert Lee
- [PATCH 6/7] libata: push part of the irq driven pio out to workqueue,
Albert Lee
- [PATCH 7/7] libata: ack unexpected INTRQ when polling,
Albert Lee
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY,
Alan Cox
Re: regressions,
Jeff Garzik
[PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix,
Mikael Pettersson
[PATCH 2.6.21-mm1 1/2] sata_promise: fix another error decode regression,
Mikael Pettersson
sata_promise - another sata dvd writer problem,
Sven Lemke
pata_via problems,
Corentin CHARY
[PATCH] sata_nv: fix ADMA freeze/thaw/irq_clear issues,
Robert Hancock
[PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 2),
Sergei Shtylyov
[PATCH 1/2] ATA: sata_promise, do not freeze ports,
Jiri Slaby
[PATCHSET] libata: improve ATA ACPI support, take#2,
Tejun Heo
- [PATCH 03/11] libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/,
Tejun Heo
- [PATCH 06/11] libata-acpi: implement ata_acpi_associate(),
Tejun Heo
- [PATCH 07/11] libata-acpi: clean up ata_acpi_exec_tfs(),
Tejun Heo
- [PATCH 10/11] libata-acpi: remove redundant checks,
Tejun Heo
- [PATCH 09/11] libata: reimplement ACPI invocation,
Tejun Heo
- [PATCH 02/11] libata: during revalidation, check n_sectors after device is configured,
Tejun Heo
- [PATCH 11/11] libata-acpi: implement _GTM/_STM support,
Tejun Heo
- [PATCH 08/11] libata-acpi: miscellaneous cleanups,
Tejun Heo
- [PATCH 01/11] libata: separate out ata_dev_reread_id(),
Tejun Heo
- [PATCH 04/11] libata-acpi: clean up parameters and misc stuff,
Tejun Heo
- [PATCH 05/11] libata-acpi: add ATA_FLAG_ACPI_SATA port flag,
Tejun Heo
[PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff,
Tejun Heo
[PATCH pata-2.6 fix queue] hpt366: don't check enablebits for HPT36x,
Sergei Shtylyov
[patch 6/7] SCSI: save disk in scsi_device - resend,
Kristen Carlson Accardi
[patch 4/7] libata: expose AN to user space - resend,
Kristen Carlson Accardi
[patch 3/7] scsi: expose AN to user space - resend,
Kristen Carlson Accardi
[patch 0/7] Asynchronous Notification for ATAPI devices (v2) - resend,
Kristen Carlson Accardi
Re: Fw: HPT366: 2.6.21 breaks HPT366 detection on boot,
Sergei Shtylyov
Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work,
Harald Dunkel
Recent ipr breakage (ata_do_eh api change),
Brian King
Re: 2.6.21-mm1: many processes end up in D state,
Jiri Slaby
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
