I have a SanDisk Extreme IV 4GB CF card, capable of 40MB/s read, but
am seeing 30MB/s read [1], connected directly to the IDE bus on my
ICH8 controller.
How can I find out if this would be a timing or configuration issue?
On 2.6.20.5 [2], the 120nS timing looks to be right [3], but perhaps
no multi-word transfer is hurting here...alas, it can't be enabled
with the libata subsystem and 'hdparm -m', so what else?
Daniel
--- [1]
# hdparm -t /dev/sdb
/dev/sdb:
Timing buffered disk reads: 94 MB in 3.05 seconds = 30.79 MB/sec
--- [2]
ata7: PATA max UDMA/100 cmd 0x000000000001bc00 ctl 0x000000000001b882
bmdma 0x000000000001b400 irq 17
ata7.00: CFA: SanDisk SDCFX-4096, HDX 4.04, max UDMA/66
ata7.00: 8027712 sectors, multi 0: LBA
ata7.00: configured for UDMA/66
ATA: abnormal status 0x7F on port 0x000000000001b807
scsi 6:0:0:0: Direct-Access ATA SanDisk SDCFX-40 HDX PQ: 0 ANSI: 5
SCSI device sdb: 8027712 512-byte hdwr sectors (4110 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 8027712 512-byte hdwr sectors (4110 MB)
sdb: sdb1
sd 6:0:0:0: Attached scsi removable disk sdb
--- [3]
# hdparm -I /dev/sdb
/dev/sdb:
CompactFlash ATA device, with removable media
Model Number: SanDisk SDCFX-4096
Serial Number: 116802D2807J3335
Firmware Revision: HDX 4.04
Standards:
Supported: 4
Likely used: 4
Configuration:
Logical max current
cylinders 7964 7964
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 8027712
LBA user addressable sectors: 8027712
device size with M = 1024*1024: 3919 MBytes
device size with M = 1000*1000: 4110 MBytes (4 GB)
Capabilities:
LBA, IORDY(may be)(cannot be disabled)
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 4 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
Write cache
* CFA feature set
--
Daniel J Blueman
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
