David Greaves wrote:
Mark Lord wrote:
That's odd. Could you try that again,
with the latest (either v7.3 or v7.4) version of hdparm
(from sourceforge) ?
Using Debian's 7.3 via apt-get experimental - is that OK or would you like me to
compile the upstream?
No, what you have is good, thanks.
cu:~# hdparm -K1 /dev/hda
/dev/hda:
setting drive keep features to 1 (on)
HDIO_DRIVE_CMD(keepsettings) failed: Input/output error
dmesg:
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
I just find it odd that the drive rejects the command,
but Seagate do seem to be the first to drop older features nowadays.
But I thought their PATA units might have kept that functionality.
I have some modern seagate SATA drives here -- I'll try it on those too,
just for my own education.
Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
