Re: JMicron JMB363 issue fixed / ICH8 RAID volume trace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrew Paprocki wrote:
> Tejun, fdisk -l output is attached
> 
> Basically, in the ICH8 BIOS:
> /dev/sda + sdb = 2 500GB drives in RAID1 configuration
> /dev/sdc + sdd + sde + sdf = 4 320GB drives in RAID5 configuration
> 
> /dev/sdg is a 320GB boot drive connected to the JMB363 chipset
> 
> Is there some kind of problem when probing these partitions because
> they are fake software RAID through the ICH8? The messages only spew
> at boot time.

OIC, you need to use dm-raid to use those fake RAIDs properly.  If you
don't intend to access the RAIDs, you don't need to care.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux