Uwe Koziolek 写道:
>> hi,
>>
>> When we used 2.6.18 and 2.6.20 on ASUS sis-671 motherboard, We have some
>> problem: cannot find the harddisk controller.
>> In BIOS, the SATA mode is 2P+2IDE.
>>
>> The official kernel 2.6.18, 2.6.20 and new 2.6.21 does not work, i get
>> some information about sata_sis 0.7.1 from you, may I get it ?
>>
>> We are so urgent, please help me.
>>
>> Thank you very much!!!!
>>
> Asus is selling a P5X-MX SE motherboard with a SiS968
> southbridge. The SiS671 Northbridge is not intresting for the SATA-support.
> Currently it is only planned to support this chipset in
> AHCI-mode. You should select the AHCI mode for the SATA-ports in the
> BIOS. The ahci driver should support your board.
> kernel 2.6.20 should be sufficient.
> If this does not work, please provide the output of
> lspci -vvxxx and the selected mode for the SATA-port.
>
> regards
> Uwe Koziolek
>
>
>
>
>
>
Sorry. I did not describe the problem correctly.
Our OEM vendor used ASUS P5MSDZ-TVM and ECS 671T-MV, specially, they
want to use sata harddisk and choose IDE mode for entering WinXP, and
then want us to solve the IDE mode+SATA harddisk problem forcely. hehe.
Can you give me some advice?
attachment is lspci result and dmesg.
Thank you very much!!!
Linux version 2.6.20.3-ubuntu1 (root@yulin-laptop) (gcc ç??æ?¬ 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #3 SMP PREEMPT Sun May 27 22:26:26 CST 2007 ()
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003beb0000 end: 000000003bfb0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003bfb0000 size: 000000000000e000 end: 000000003bfbe000 type: 3
copy_e820_map() start: 000000003bfbe000 size: 0000000000042000 end: 000000003c000000 type: 4
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
BIOS-e820: 000000003bfbe000 - 000000003c000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 245680) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245680
early_node_map[1] active PFN ranges
0: 0 -> 245680
On node 0 totalpages: 245680
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 127 pages used for memmap
HighMem zone: 16177 pages, LIFO batch:3
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f9ba0
ACPI: RSDT (v001 052807 RSDT1521 0x20070528 MSFT 0x00000097) @ 0x3bfb0000
ACPI: FADT (v002 052807 FACP1521 0x20070528 MSFT 0x00000097) @ 0x3bfb0200
ACPI: MADT (v001 052807 APIC1521 0x20070528 MSFT 0x00000097) @ 0x3bfb0390
ACPI: MCFG (v001 052807 OEMMCFG 0x20070528 MSFT 0x00000097) @ 0x3bfb0400
ACPI: WDRT (v001 052807 OEMWDRT 0x20070528 MSFT 0x00000097) @ 0x3bfb0440
ACPI: OEMB (v001 052807 OEMB1521 0x20070528 MSFT 0x00000097) @ 0x3bfbe040
ACPI: HPET (v001 052807 OEMHPET 0x20070528 MSFT 0x00000097) @ 0x3bfb4b90
ACPI: DSDT (v001 1AAAA 1AAAA000 0x00000000 INTL 0x20051117) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: TEMPLATE Product ID: ETEMPLATE APIC at: 0xFEE00000
I/O APIC #1 Version 20 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 40000000 (gap: 3c000000:c2e00000)
Detected 3065.910 MHz processor.
Built 1 zonelists. Total pages: 243761
Kernel command line: vga=normal noacpi reboot=bios noapic usb-handoff i8042.nomux acpi=noirq os_img=os.img-2.6.20 staros_testing_usb
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 963852k/982720k available (3276k kernel code, 18288k reserved, 1446k data, 332k init, 65216k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05a4000 - 0xc05f7000 ( 332 kB)
.data : 0xc04331bf - 0xc059ccd4 (1446 kB)
.text : 0xc0100000 - 0xc04331bf (3276 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6135.78 BogoMIPS (lpj=12271569)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e41d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 0000e41d 00000000 00000001
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
Early unpacking initramfs... done
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
ACPI: setting ELCR to 8e20 (from 8c20)
CPU0: Intel(R) Celeron(R) D CPU 3.06GHz stepping 04
Total of 1 processors activated (6135.78 BogoMIPS).
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
Error attaching device data
Error attaching device data
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
pci 0000:00:06.0: Error creating sysfs bridge symlink, continuing...
pci 0000:00:07.0: Error creating sysfs bridge symlink, continuing...
pci 0000:00:1f.0: Error creating sysfs bridge symlink, continuing...
PCI: Using IRQ router default [1039/0968] at 0000:00:02.0
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1f.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:1f.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4403k freed
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
fuse init (API version 7.8)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
PCI: Setting latency timer of device 0000:00:1f.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1f.0:pcie00]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [P001] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (37 C)
ibm_acpi: ec object not found
sonypi: Sony Programmable I/O Controller Driver v1.26.
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
mk712: device not present
input: PC Speaker as /class/input/input2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
pcnet32.c:v1.33 27.Jun.2006 tsbogend@xxxxxxxxxxxxxxxx
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8101e at 0xf8804000, 00:19:21:10:f5:74, IRQ 10
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0k
ipw2200: Copyright(c) 2003-2006 Intel Corporation
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@xxxxxxxxx>
http://www.scyld.com/network/drivers.html
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS968 ATA 133 (2nd gen) controller
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hdb: TSSTcorpCD/DVDW TS-H552D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sata_sis 0000:00:05.0: version 0.7
sata_sis 0000:00:05.0: Detected SiS 1182/1183/966 SATA controller
ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c802 bmdma 0x0001bc00 irq 10
ata2: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001bc08 irq 10
scsi0 : sata_sis
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ATA: abnormal status 0x7F on port 0x0001cc07
scsi1 : sata_sis
ata2: SATA link down (SStatus 0 SControl 0)
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 15, io mem 0xfe9fd000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 11, io mem 0xfe9ff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 5, io mem 0xfe9fe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
usb 1-6: new high speed USB device using ehci_hcd and address 4
usb 1-6: configuration #1 chosen from 1 choice
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-3
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
iwlwifi: Intel(R) Wireless Link driver for Linux, 0.0.11
iwlwifi: Copyright(c) 2003-2006 Intel Corporation
usbcore: registered new interface driver zd1211rw_mac80211
Registering unionfs 20060916-2203
unionfs: debugging is not enabled
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ieee80211_crypt: registered algorithm 'NULL'
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 332k freed
input: AT Translated Set 2 keyboard as /class/input/input4
unionfs: error accessing hidden directory '/.tmpfs/.hidpart/StarOS/changes' (error -2)
unionfs_read_super: error while parsing options (err = -2)
input: ImPS/2 Generic Wheel Mouse as /class/input/input5
scsi 2:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2
SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1 sda2
[arlen]<msdos_partition> don't find 'HPA' flag.
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
00:00.0 0600: 1039:0671
Subsystem: 1019:0671
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 3.5
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 39 10 71 06 07 01 10 22 00 00 00 06 00 40 00 00
10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 71 06
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 00 03 00 c0 b8 48 4b 20 00 00 00 00 00 03 84 00
50: ff 09 0a 93 85 08 20 1c 02 a8 2b d9 14 e9 b7 31
60: 45 45 88 d0 a3 00 02 82 03 08 60 00 68 00 80 00
70: 03 9f 00 0f 00 08 00 00 00 00 00 00 01 00 00 00
80: 22 67 30 03 81 00 04 2b 20 0c 00 01 00 00 00 3c
90: 3c 00 34 40 58 44 58 67 f0 66 f8 f8 43 00 00 00
a0: 17 1b 00 00 00 ff 00 00 00 00 ff 00 00 03 a3 00
b0: 00 00 00 00 21 01 10 00 7b 7b 29 29 00 00 00 00
c0: 02 00 35 00 1b 4e 00 1f 00 00 00 00 00 00 00 00
d0: e0 00 00 00 20 0f 01 00 00 00 00 00 00 00 00 00
e0: 0e 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 48 11 88 04 00 00 00 00 00 00 00 00 00 00 00 00
00:01.0 0604: 1039:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00: 39 10 03 00 07 01 20 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 20 00
20: a0 fe a0 fe 00 d0 f0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 01 45 61 00 00 60 00 a7 00 00 00 00 00 00 00
d0: 0a 44 2a 2a 40 00 00 00 00 00 00 00 00 00 00 00
e0: 0e 01 30 30 00 28 28 00 00 50 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.0 0601: 1039:0968 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 39 10 68 09 0f 00 00 02 01 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: b1 0a 0a 0b 80 00 20 80 12 00 00 00 11 20 04 01
50: 11 28 02 01 61 0b 67 0b a5 12 12 00 36 06 b6 00
60: 0b 05 0f 80 ff c1 10 12 09 80 08 00 85 00 00 14
70: 93 00 ff ff 00 08 00 05 20 00 00 80 04 00 08 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 1f 00 d3 fe 01 00 00 00 d1 fe 03 0c 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 c0 c0 03 00 00 00 00 03 9f 00 0f 00 00 00 45
d0: 02 00 00 00 44 61 30 00 45 00 04 61 aa aa aa aa
e0: 40 00 00 08 7d 00 44 00 00 00 00 00 00 00 00 00
f0: 0a 00 00 00 00 00 92 00 00 00 00 08 00 00 00 00
00:02.5 0101: 1039:5513 (rev 01) (prog-if 80)
Subsystem: 1019:5513
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fff0 [size=16]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 13 55 05 00 10 02 01 80 01 01 00 80 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: f1 ff 00 00 00 00 00 00 00 00 00 00 19 10 13 55
30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00
50: 82 21 a0 00 2a 9e 11 d0 01 00 02 80 00 00 00 00
60: fb aa 00 00 00 dd 00 00 00 a8 00 00 64 64 00 00
70: b0 66 20 1e 56 23 06 04 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10)
Subsystem: 1019:7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K]
00: 39 10 01 70 17 01 80 02 0f 10 03 0c 08 40 80 00
10: 00 f0 9f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 01 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 50
40: 00 00 00 00 54 ad 01 00 71 82 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10)
Subsystem: 1019:7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
00: 39 10 01 70 17 01 80 02 0f 10 03 0c 08 40 00 00
10: 00 e0 9f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 01 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 50
40: 00 00 00 00 54 ad 01 00 71 82 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.3 0c03: 1039:7002 (prog-if 20)
Subsystem: 1019:7002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin C routed to IRQ 15
Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 02 70 06 01 90 02 00 20 03 0c 00 40 00 00
10: 00 d0 9f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 70
30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 03 00 50
40: 80 00 00 00 10 00 80 00 10 80 07 00 00 00 00 00
50: 01 00 c2 c9 00 00 00 00 0a 00 00 21 00 00 00 00
60: 20 20 ff 01 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 00 00 00 00 08 c0 00 00 f7 3f 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.0 0101: 1039:1183 (rev 03) (prog-if 85)
Subsystem: 1019:1180
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c000 [size=4]
Region 4: I/O ports at bc00 [size=16]
Region 5: I/O ports at b800 [size=128]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 83 11 05 00 10 02 03 85 01 01 00 40 00 00
10: 01 cc 00 00 01 c8 00 00 01 c4 00 00 01 c0 00 00
20: 01 bc 00 00 01 b8 00 00 00 00 00 00 19 10 80 11
30: 00 00 00 00 58 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: a2 00 a2 00 00 00 d1 14 01 00 02 80 00 00 00 00
60: 20 00 02 00 00 00 00 2a dd 0d 00 00 64 64 64 64
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: fe b3 7e 40 ff b3 76 c0 00 00 00 00 00 00 00 00
90: 40 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00
a0: 4f b1 63 39 18 25 9e 83 1c 40 12 01 01 00 00 02
b0: 20 00 00 00 00 20 00 00 7f 7f 7f 7f 7f 7f 7f 7f
c0: 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00
d0: 23 01 00 00 00 00 00 00 00 03 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:06.0 0604: 1039:000a
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [b0] #0d [0000]
Capabilities: [c0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <1us, L1 <2us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd Off, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [f4] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 0a 00 04 01 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 03 00
40: 00 00 00 00 c0 00 01 00 07 04 00 00 00 40 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0d c0 00 00 39 10 04 00 00 00 00 00 00 00 00 00
c0: 05 d0 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 f4 41 01 20 00 00 00 1f 08 10 00 11 cc 00 00
e0: 00 00 01 10 00 00 00 00 c0 03 00 00 00 00 00 00
f0: 00 00 00 00 01 00 02 c8 00 00 00 00 00 00 00 00
00:07.0 0604: 1039:000a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [b0] #0d [0000]
Capabilities: [c0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <1us, L1 <2us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd Off, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [f4] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 0a 00 07 01 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 e1 e1 00 00
20: b0 fe b0 fe f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 03 00
40: 00 00 00 00 c0 00 01 00 07 04 00 00 00 40 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0d c0 00 00 39 10 04 00 00 00 00 00 00 00 00 00
c0: 05 d0 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 f4 41 01 20 00 00 00 1f 08 10 00 11 cc 00 00
e0: 00 00 11 10 00 00 00 00 c0 03 40 00 00 00 00 00
f0: 00 00 00 00 01 00 02 c8 00 00 00 00 00 00 00 00
00:0f.0 0403: 1039:7502
Subsystem: 1019:1386
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe9f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 02 75 06 00 10 02 00 00 03 04 00 00 00 00
10: 00 80 9f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 86 13
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 34 0b
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 20 00 00 7c 07 00 00 30 00 00 00 00 00 00 00
70: e4 00 80 1d 0f 00 00 00 80 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 ff ff ff 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1f.0 0604: 1039:0004
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [d0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <1us, L1 <2us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd Off, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [a0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [f4] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] #0d [0000]
00: 39 10 04 00 04 01 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 03 00
40: 10 00 00 70 02 50 01 20 00 00 00 00 00 01 00 00
50: 00 00 0a 42 00 00 01 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 0d 00 00 00 39 10 04 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 05 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 a0 41 01 20 00 00 00 1f 08 18 00 01 cd 00 00
e0: 00 00 01 10 80 25 00 00 c0 03 00 00 00 00 00 00
f0: 00 00 00 00 01 70 02 c8 00 00 00 00 00 00 00 00
01:00.0 0300: 1039:6351 (rev 10)
Subsystem: 1019:6351
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
BIST result: 00
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at feae0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 39 10 51 63 03 00 30 02 10 00 00 03 00 00 00 80
10: 08 00 00 d0 00 00 ae fe 01 dc 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 51 63
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 50 02 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 00 30 00 0b 02 00 ff 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
03:00.0 0200: 10ec:8136 (rev 01)
Subsystem: 1019:8136
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ec00 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <1us, L1 unlimited
Device: AtnBtn+ AtnInd+ PwrInd+
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [84] Vendor Specific Information
00: ec 10 36 81 07 01 10 40 01 00 00 02 20 00 00 00
10: 01 ec 00 00 00 00 00 00 04 f0 bf fe 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 36 81
30: 00 00 bc fe 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 84 01 00 20 7f 00 00 10 28 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 7c b0 05 00 74 10 01 00 2f 00 00 00
a0: 02 28 ff 01 00 00 00 00 00 01 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
