Hi, > > Have you had time to check if the latest patch fixes our problems > > with promise-controller ? > > > > http://bugzilla.kernel.org/attachment.cgi?id=11694&action=view > > > > The above patch seems to apply to the latest rc4 kernel. > > I have not found the time to reboot my own server as of yet. > I have tested - but it didn't solve the problem. Interesting. I tested the above mentioned patch as well with the fedora development kernel (3209) which is based on 2.6.22-rc4 and the errors were little bit different compared to previous ones. I have not seen the HSM violation errror in the past ... ----------------------------------------------------------------------------- Jun 8 09:21:34 alderan kernel: sata_promise 0000:00:0e.0: applying SATAII TX4 port numbering workaround Jun 8 09:21:34 alderan kernel: scsi0 : sata_promise Jun 8 09:21:34 alderan kernel: scsi1 : sata_promise Jun 8 09:21:34 alderan kernel: scsi2 : sata_promise Jun 8 09:21:34 alderan kernel: scsi3 : sata_promise Jun 8 09:21:34 alderan kernel: ata1: SATA max UDMA/133 cmd 0xf880a380 ctl 0xf880a3b8 bmdma 0x00000000 irq 0 Jun 8 09:21:34 alderan kernel: ata2: SATA max UDMA/133 cmd 0xf880a280 ctl 0xf880a2b8 bmdma 0x00000000 irq 0 Jun 8 09:21:34 alderan kernel: ata3: SATA max UDMA/133 cmd 0xf880a200 ctl 0xf880a238 bmdma 0x00000000 irq 0 Jun 8 09:21:34 alderan kernel: ata4: SATA max UDMA/133 cmd 0xf880a300 ctl 0xf880a338 bmdma 0x00000000 irq 0 Jun 8 09:21:35 alderan kernel: Switched to high resolution mode on CPU 0 Jun 8 09:21:35 alderan kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 8 09:21:35 alderan kernel: ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968 Jun 8 09:21:35 alderan kernel: ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133 Jun 8 09:21:35 alderan kernel: ata1.00: 390721968 sectors, multi 0: LBA48 Jun 8 09:21:35 alderan kernel: ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968 Jun 8 09:21:35 alderan kernel: ata1.00: configured for UDMA/133 Jun 8 09:21:35 alderan kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 8 09:21:35 alderan kernel: ata2.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968 Jun 8 09:21:35 alderan kernel: ata2.00: ATA-6: ST3200822AS, 3.01, max UDMA/133 Jun 8 09:21:35 alderan kernel: ata2.00: 390721968 sectors, multi 0: LBA48 Jun 8 09:21:35 alderan kernel: ata2.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968 Jun 8 09:21:35 alderan kernel: ata2.00: configured for UDMA/133 Jun 8 09:21:35 alderan kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 8 09:21:35 alderan kernel: ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 09:21:35 alderan kernel: ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 Jun 8 09:21:35 alderan kernel: ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) Jun 8 09:21:35 alderan kernel: ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 09:21:35 alderan kernel: ata3.00: configured for UDMA/133 Jun 8 09:21:35 alderan kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 8 09:21:35 alderan kernel: ata4.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 09:21:35 alderan kernel: ata4.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 Jun 8 09:21:35 alderan kernel: ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) Jun 8 09:21:35 alderan kernel: ata4.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 09:21:35 alderan kernel: ata4.00: configured for UDMA/133 Jun 8 09:21:35 alderan kernel: scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5 Jun 8 09:21:35 alderan kernel: sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) Jun 8 09:21:35 alderan kernel: sd 0:0:0:0: [sda] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sda: sda1 sda2 Jun 8 09:21:35 alderan kernel: sd 0:0:0:0: [sda] Attached SCSI disk Jun 8 09:21:35 alderan kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 8 09:21:35 alderan kernel: scsi 1:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5 Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sdb: sdb1 sdb2 Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: [sdb] Attached SCSI disk Jun 8 09:21:35 alderan kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 Jun 8 09:21:35 alderan kernel: scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sdc: sdc1 sdc2 Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: [sdc] Attached SCSI disk Jun 8 09:21:35 alderan kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0 Jun 8 09:21:35 alderan kernel: scsi 3:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 09:21:35 alderan kernel: sdd: sdd1 sdd2 Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: [sdd] Attached SCSI disk Jun 8 09:21:35 alderan kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0 Jun 8 10:11:36 alderan kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 Jun 8 10:11:36 alderan kernel: ata4.00: (port_status 0x20080000) Jun 8 10:11:36 alderan kernel: ata4.00: cmd 25/00:08:d7:dc:8a/00:00:33:00:00/e0 tag 0 cdb 0x0 data 4096 in Jun 8 10:11:36 alderan kernel: res 50/00:00:de:dc:8a/00:00:33:00:00/e0 Emask 0x2 (HSM violation) Jun 8 10:11:36 alderan kernel: ata4: soft resetting port Jun 8 10:11:37 alderan kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 8 10:11:37 alderan kernel: ata4.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 10:11:37 alderan kernel: ata4.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 10:11:37 alderan kernel: ata4.00: configured for UDMA/133 Jun 8 10:11:37 alderan kernel: ata4: EH complete Jun 8 10:11:37 alderan kernel: sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) Jun 8 10:11:37 alderan kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 8 10:11:37 alderan kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 8 10:11:39 alderan kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 Jun 8 10:11:39 alderan kernel: ata4.00: (port_status 0x20080000) Jun 8 10:11:39 alderan kernel: ata4.00: cmd c8/00:08:0f:a9:a5/00:00:00:00:00/e3 tag 0 cdb 0x0 data 4096 in Jun 8 10:11:39 alderan kernel: res 50/00:00:16:a9:a5/00:00:33:00:00/e3 Emask 0x2 (HSM violation) Jun 8 10:11:39 alderan kernel: ata4: soft resetting port Jun 8 10:11:39 alderan kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 8 10:11:39 alderan kernel: ata4.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 10:11:39 alderan kernel: ata4.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168 Jun 8 10:11:39 alderan kernel: ata4.00: configured for UDMA/133 Jun 8 10:11:39 alderan kernel: ata4: EH complete Jun 8 10:11:39 alderan kernel: sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) Jun 8 10:11:39 alderan kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 8 10:11:39 alderan kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ----------------------------------------------------------------------------- Regards, Tomi Orava > > [ 1076.900017] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1380000 > action 0x2 frozen > [ 1076.900031] ata1.00: cmd c8/00:00:00:16:e6/00:00:00:00:00/e1 tag 0 > cdb 0x0 data 131072 in > [ 1076.900033] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask > 0x4 (timeout) > [ 1082.249590] ata1: port is slow to respond, please be patient (Status > 0xff) > [ 1086.951564] ata1: device not ready (errno=-16), forcing hardreset > [ 1086.951573] ata1: hard resetting port > [ 1092.465004] ata1: port is slow to respond, please be patient (Status > 0xff) > [ 1096.998967] ata1: COMRESET failed (errno=-16) > [ 1096.998977] ata1: hard resetting port > [ 1102.512501] ata1: port is slow to respond, please be patient (Status > 0xff) > [ 1107.046465] ata1: COMRESET failed (errno=-16) > [ 1107.046474] ata1: hard resetting port > [ 1112.559985] ata1: port is slow to respond, please be patient (Status > 0xff) > [ 1142.058746] ata1: COMRESET failed (errno=-16) > [ 1142.058758] ata1: hard resetting port > [ 1147.068505] ata1: COMRESET failed (errno=-16) > [ 1147.068514] ata1: reset failed, giving up > [ 1147.068517] ata1.00: disabled > [ 1147.068531] ata1: EH complete > [ 1147.068962] sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > [ 1147.068968] end_request: I/O error, dev sda, sector 31856128 > [ 1147.068972] Buffer I/O error on device sda, logical block 3982016 > [ 1147.068978] Buffer I/O error on device sda, logical block 3982017 > [ 1147.068981] Buffer I/O error on device sda, logical block 3982018 > [ 1147.068985] Buffer I/O error on device sda, logical block 3982019 > [ 1147.068989] Buffer I/O error on device sda, logical block 3982020 > [ 1147.068992] Buffer I/O error on device sda, logical block 3982021 > [ 1147.068996] Buffer I/O error on device sda, logical block 3982022 > [ 1147.068999] Buffer I/O error on device sda, logical block 3982023 > [ 1147.069003] Buffer I/O error on device sda, logical block 3982024 > [ 1147.069006] Buffer I/O error on device sda, logical block 3982025 > [ 1147.069037] sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > [ 1147.069041] end_request: I/O error, dev sda, sector 31856384 > [ 1147.071273] sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > [ 1147.071282] end_request: I/O error, dev sda, sector 31856128 > [ 1147.072482] sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > [ 1147.072491] end_request: I/O error, dev sda, sector 31856128 -- Tomi.Orava@xxxxxxxxxxxxxxxxxx - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
