Linux Device Tree

• Thread Index

• Re: [PATCH 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: mtd: davinci: convert to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 1/2] mtd: nand: davinci: add support for on-die ECC engine type
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 0/2] Add support for "on-die" ECC on Davinci.
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: renesas: r8a7778: rename 'bsc' to 'lbsc'
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH V1 3/3] scsi: ufs: qcom: Add support for multiple ICE algorithms
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH V1 1/3] dt-bindings: ufs: qcom: Document ice configuration table
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH V1 0/3] Add support for multiple ICE algorithms
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH V1 2/3] arm64: dts: qcom: sm8650: Add ICE algorithm entries
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH v3 3/4] power: supply: initial support for TWL6030/32
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: mfd: twl: add charger node also for TWL603x
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 0/4] power: supply: twl6030/32 charger
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: power: supply: Add TI TWL603X charger
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 4/4] ARM: dts: ti/omap: use standard node name for twl4030 charger
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH v2 0/2] bcm4908: Fix secondary CPU initialization
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Specify i2c1 clock frequency
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Configure onboard LEDs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: pmk8350: Add more SDAM slices
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: qcs6490-rb3gen2: Describe LED array
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Enable PWR/VOL keys
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• Re: [PATCHv2 0/5] devicetree: move nvmem-cells users to nvmem-layout
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] Add support for Zyxel EX3510-B
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/3] X1E Dell XPS 9345 support
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH] arm64: dts: ti: k3-am62a7-phyboard-lyra-rdk: Update ethernet internal delay
  • From: Nathan Morrisson <nmorrisson@xxxxxxxxxx>
• Re: [PATCH 1/2] firmware: qcom: scm: suppress download mode error
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v3 09/10] iio: adc: ad7606: Add iio-backend support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 10/10] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 08/10] iio: adc: ad7606: Introduce num_adc_channels
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 06/10] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 05/10] iio: adc: ad7606: Sort includes in alphabetical order
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 04/10] Documentation: iio: Document ad7606 driver
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: iio: adc: ad7606: Remove spi-cpha from required
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 01/10] iio: adc: ad7606: Fix typo in the driver name
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v3 00/10] Add iio backend compatibility for ad7606
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-kc1: fix twl6030 power node
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Peripheral Image Loader support for Qualcomm SoCs
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: ti: omap: fix dtbs_check warnings for ti,gpmc-nand and ti,gpmc-onenend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v7 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 5/6] remoteproc: qcom: Add support of SHM bridge to enable memory protection
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 4/6] remoteproc: qcom: Add support to parse qcom,devmem property
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 3/6] remoteproc: qcom: Add helper function to support IOMMU devmem translation
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 2/6] remoteproc: qcom: Add iommu map_unmap helper function
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: remoteproc: qcom,pas-common: Introduce iommus and qcom,devmem property
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 0/6] Peripheral Image Loader support for Qualcomm SoCs
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: ti/omap: Fix at24 EEPROM node names
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] clk: eyeq: add driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: ti: omap: fix dtbs_check warnings for ti,gpmc-nand and ti,gpmc-onenend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v7 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 1/1] MAINTAINERS: misc: update fsl,qoriq-mc.txt to fsl,qoriq-mc.yaml
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v7 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: renesas: genmai: enable MMCIF
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: x1e80100: Add debug uart to Lenovo Yoga Slim 7x
  • From: Maya Matuszczyk <maccraft123mc@xxxxxxxxx>
• Re: [PATCHv2 5/5] documentation: use nvmem-layout in examples
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• Re: [PATCH 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• Re: [PATCH 20/20] arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 19/20] arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 18/20] arm64: dts: renesas: Use interrupts-extended for WLAN
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 17/20] arm64: dts: renesas: Use interrupts-extended for video decoders
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 16/20] arm64: dts: renesas: Use interrupts-extended for USB muxes
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 15/20] arm64: dts: renesas: Use interrupts-extended for PMICs
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• [PATCH v5 1/2] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 2/2] arm64: dts: renesas: rz{g2l,g2lc}-smarc-som: Update partition table for spi-nor flash
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/2] Enable serial NOR flash on RZ/G2UL SMARC EVK
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [no subject]
  • From: Sam Edwards <CFSworks@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• Re: [PATCH] mips: bmips: bcm6358/6368: define required brcm,bmips-cbr-reg
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 14/20] arm64: dts: renesas: Use interrupts-extended for I/O expanders
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 13/20] arm64: dts: renesas: Use interrupts-extended for HDMI bridges
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] clk: eyeq: add driver
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH net-next v4 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 12/20] arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] clk: eyeq: add driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 11/20] arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 10/20] ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v1] dt-bindings: arm: fsl: drop usage of Toradex SOMs compatible alone
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 05/20] ARM: dts: renesas: Use interrupts-extended for touchpanels
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v1] dt-bindings: arm: fsl: drop usage of Toradex SOMs compatible alone
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 4/4] leds: bcm63138: Add some register defines
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: dts: renesas: genmai: enable SDHI0
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 2/2] net: phy: aquantia: allow forcing order of MDI pairs
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH net-next v3 1/2] dt-bindings: net: marvell,aquantia: add property to override MDI_CFG
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH v4 0/4] Add Mobileye EyeQ clock support
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] leds: bcm63138: Handle shift register config
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH v1] dt-bindings: arm: fsl: drop usage of Toradex SOMs compatible alone
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH net-next v4 3/3] net: fec: make PPS channel configurable
  • From: Csókás Bence <csokas.bence@xxxxxxxxx>
• Re: [PATCH net-next v4 2/3] net: fec: refactor PPS channel configuration
  • From: Csókás Bence <csokas.bence@xxxxxxxxx>
• Re: [PATCH v4 05/11] dt-bindings: iio: dac: ad3552r: add iio backend support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH net-next v4 1/3] dt-bindings: net: fec: add pps channel property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 09/20] ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 08/20] ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 07/20] ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 06/20] ARM: dts: renesas: Use interrupts-extended for video decoders
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• [PATCH v4 4/4] clk: eyeq: add driver
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v4 3/4] clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v4 1/4] Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings"
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH 04/20] ARM: dts: renesas: Use interrupts-extended for PMICs
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 03/20] ARM: dts: renesas: Use interrupts-extended for HDMI bridges
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH net-next v4 3/3] net: fec: make PPS channel configurable
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH net-next v4 2/3] net: fec: refactor PPS channel configuration
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH net-next v4 0/3] net: fec: add PPS channel configuration
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH net-next v4 1/3] dt-bindings: net: fec: add pps channel property
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 5/7] dt-bindings: iio: adc: add ad485x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH 02/20] ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 01/20] ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH 00/14] Remove support for platform data from samsung keypad
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Aw: Re: [RFC PATCH net-next v3 3/8] net: pcs: pcs-mtk-lynxi: add platform driver for MT7988
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: renesas: kzm9d: use proper node names for keys
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: renesas: alt: use proper node names for keys
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: renesas: lager: use proper node names for keys
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 08/10] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Aw: Re: [RFC PATCH net-next v3 3/8] net: pcs: pcs-mtk-lynxi: add platform driver for MT7988
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: "Kiran Kumar C.S.K" <quic_kkumarcs@xxxxxxxxxxx>
• Re: [PATCH v7 1/2] arm64: dts: qcom: sm8650: extend the register range for UFS ICE
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 0/2] arm64: dts: qcom: extend the register range for ICE on sm8[56]50
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 7/7] Documentation: ABI: testing: ad485x: add ABI docs
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 6/7] iio: adc: ad485x: add ad485x driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 5/7] dt-bindings: iio: adc: add ad485x
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 4/7] iio: adc: adi-axi-adc: set data format
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 3/7] iio: adc: adi-axi-adc: add interface type
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 2/7] iio: backend: add support for data size set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 1/7] iio: backend: add API for interface get
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• RE: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v4 5/8] dt-bindings: clock: qcom: Add SA8775P display clock controllers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 1/2] arm64: dts: qcom: sm8650: extend the register range for UFS ICE
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V4 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 2/2] usb: typec: Add support for Parade PS8830 Type-C Retimer
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: renesas: r8a7778: rename 'bsc' to 'lbsc'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/2] arm64: dts: qcom: extend the register range for ICE on sm8[56]50
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: renesas: add proper node names to (L)BSC devices
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: dts: renesas: genmai: enable SDHI0
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: renesas: genmai: enable MMCIF
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 06/11] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v4 07/11] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: renesas: genmai: enable SDHI0
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 00/14] Remove support for platform data from samsung keypad
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/3] ARM: dts: renesas: r7s72100: 'bus-width' is a board property
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] arm64: dts: renesas: r9a09g057: Add OPP table
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v4 03/11] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: dts: renesas: r7s72100: 'bus-width' is a board property
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 resend 2/7] nvmem: Add R-Car E-FUSE driver
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: renesas: genmai: enable SDHI0
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 14/20] arm64: dts: renesas: Use interrupts-extended for I/O expanders
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 19/20] arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 02/20] ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 00/20] renesas: dts: Use interrupts-extended
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 10/20] ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 17/20] arm64: dts: renesas: Use interrupts-extended for video decoders
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 13/20] arm64: dts: renesas: Use interrupts-extended for HDMI bridges
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 07/20] ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 05/20] ARM: dts: renesas: Use interrupts-extended for touchpanels
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 12/20] arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 04/20] ARM: dts: renesas: Use interrupts-extended for PMICs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 06/20] ARM: dts: renesas: Use interrupts-extended for video decoders
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 16/20] arm64: dts: renesas: Use interrupts-extended for USB muxes
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 18/20] arm64: dts: renesas: Use interrupts-extended for WLAN
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 09/20] ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 01/20] ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 03/20] ARM: dts: renesas: Use interrupts-extended for HDMI bridges
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 20/20] arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 15/20] arm64: dts: renesas: Use interrupts-extended for PMICs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 08/20] ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 11/20] arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3] arm64: dts: qcom: x1e80100-t14s: add another trackpad support
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v1 1/4] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: "Kiran Kumar C.S.K" <quic_kkumarcs@xxxxxxxxxxx>
• [PATCH v1 4/4] arm64: dts: mediatek: mt7988: add pinctrl support
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v1 0/4] Add pinctrl support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v1 3/4] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH v2 3/3] pinctrl: renesas: rzg2l: Add support for configuring schmitt-trigger
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] pinctrl: renesas: rzg2l: Add support for enabling/disabling open-drain outputs
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow schmitt and open drain properties
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v1 2/4] pinctrl: mediatek: add MT7988 pinctrl driver
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH v4 06/11] iio: backend: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v1 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0)
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v2 3/3] pinctrl: renesas: rzg2l: Add support for configuring schmitt-trigger
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v2 2/3] pinctrl: renesas: rzg2l: Add support for enabling/disabling open-drain outputs
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow schmitt and open drain properties
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v2 0/3] pinctrl: renesas: rzg2l: Add support to configure open-drain and schmitt-trigger properties
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• RE: [PATCH v4 2/2] arm64: dts: renesas: rz{g2l,g2lc}-smarc-som: Update partition table for spi-nor flash
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIO
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• [PATCH v3 2/2] Bluetooth: btnxpuart: Add GPIO support to power save feature
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• [PATCH v3 0/2] Bluetooth: btnxpuart: Add GPIO mechanism to
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• RE: [PATCH v4 1/2] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: imx8mp-phyboard-pollux-rdk: update gpio-line-names
  • From: Teresa Remmet <T.Remmet@xxxxxxxxx>
• [PATCH 2/2] mmc: pwrseq_simple: add support for reset control
  • From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: mmc: mmc-pwrseq-simple: add support for reset control
  • From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 2/5] arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH 2/3] pinctrl: renesas: rzg2l: Add support for configuring open-drain outputs
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v7 7/7] wifi: wilc1000: Add WILC3000 support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v7 6/7] wifi: wilc1000: Register wiphy after reading out chipid
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 7/7] wifi: wilc1000: Add WILC3000 support
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 6/7] wifi: wilc1000: Register wiphy after reading out chipid
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 5/7] wifi: wilc1000: Fold wilc_create_wiphy() into cfg80211.c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 4/7] wifi: wilc1000: Fill in missing error handling
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 3/7] wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8 1/7] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v5 4/5] pinctrl: qcom: ipq5018: allow it to be bulid on arm32
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input-schmitt-{enable,disable}' and 'drive-open-drain' properties
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH 2/2] Bluetooth: btnxpuart: implement powerup sequence.
  • From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
  • From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v12 2/5] arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V3 4/7] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: gpio: add support for NXP S32G2/S32G3 SoCs
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: nvmem: mediatek: efuse: Reuse mt8186-efuse in mt8188
  • From: Pablo Sun <pablo.sun@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc7280: enable venus node
  • From: Vedang Nagar <quic_vnagar@xxxxxxxxxxx>
• RE: [PATCH net-next v5 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: <Divya.Koppera@xxxxxxxxxxxxx>
• RE: [PATCH net-next v5 2/2] net: phy: Add support for PHY timing-role configuration via device tree
  • From: <Divya.Koppera@xxxxxxxxxxxxx>
• [PATCH v4 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 0/5] Add support for DisplayPort on SA8775P platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: renesas: r9a09g057: Add ICU node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH V3 7/7] arm64: defconfig: Enable IPQ5424 RDP466 base configs
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 4/7] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 6/7] arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 5/7] dt-bindings: qcom: Add ipq5424 boards
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 3/7] dt-bindings: mmc: sdhci-msm: add IPQ5424 compatible
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 2/7] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 1/7] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 0/7] Add minimal boot support for IPQ5424
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v10 3/3] drm/mediatek: Implement OF graphs support for display paths
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/7] Add NSS clock controller support for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v7 2/2] arm64: dts: qcom: sm8550: extend the register range for UFS ICE
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] arm64: dts: qcom: sm8650: extend the register range for UFS ICE
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: x1e80100: describe tcsr download mode register
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 4/5] mfd: axp20x: Add support for AXP323
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 3/5] mfd: axp20x: Allow multiple regulators
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v3 0/9] Add platform supports to MediaTek MT8188 SoC (part 2)
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/8] dt-bindings: clock: qcom: Add SA8775P display clock controllers
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v4 3/8] dt-bindings: clock: qcom: Add SA8775P camera clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: Switch PCIe 6a to 4 lanes mode
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: x1e80100: Switch PCIe 6a to 4 lanes mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH net-next v5 2/2] net: phy: Add support for PHY timing-role configuration via device tree
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH net-next v5 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH net-next v5 0/2] net: phy: Support master-slave config via device tree
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v7 7/7] wifi: wilc1000: Add WILC3000 support
  • From: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
• Re: [PATCH v7 6/7] wifi: wilc1000: Register wiphy after reading out chipid
  • From: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: power: mediatek: Refine multiple level power domain nodes
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: power: mediatek: Refine multiple level power domain nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: mediatek: mt8188: Add DP-INTF nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 7/9] arm64: dts: mediatek: mt8188: Add display nodes for vdosys1
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 6/9] arm64: dts: mediatek: mt8188: Add display nodes for vdosys0
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 5/9] arm64: dts: mediatek: mt8188: Add JPEG decoder and encoder nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 4/9] arm64: dts: mediatek: mt8188: Add video decoder and encoder nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 3/9] arm64: dts: mediatek: mt8188: Add MIPI DSI nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 1/9] arm64: dts: mediatek: mt8188: Assign GCE aliases
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v3 0/9] Add platform supports to MediaTek MT8188 SoC (part 2)
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH net-next v2] dt-bindings: net: realtek: Use proper node names
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/3] riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH 2/3] irqchip: add T-HEAD C900 ACLINT SSWI driver
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH 0/3] riscv: interrupt-controller: Add T-HEAD C900 ACLINT SSWI
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH v6 7/7] arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 1/7] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 2/7] dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 3/7] clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v6 0/7] Add NSS clock controller support for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH V5 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH V5 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcm6490: Allow UFS regulators load/mode setting
  • From: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
• Re: [PATCH 3/3] pinctrl: renesas: rzg2l: Add support for configuring schmitt-trigger
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] leds: bcm63138: Add some register defines
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 2/4] leds: bcm63138: Use scopes and guards
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 3/4] leds: bcm63138: Handle shift register config
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 0/4] leds: bcm63138: Add some new bindings and code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V5 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH V5 7/7] arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH V4 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: renesas: rzg2l: Add support for configuring open-drain outputs
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input-schmitt-{enable,disable}' and 'drive-open-drain' properties
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH] dt-bindings: power: mediatek: Refine multiple level power domain nodes
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• RE: [PATCH v1 2/2] Bluetooth: btnxpuart: Add GPIO support to power save feature
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• Re: [PATCH 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v13 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIO
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• Re: [PATCH v4 03/11] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: renesas: rz{g2l,g2lc}-smarc-som: Update partition table for spi-nor flash
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: display: mediatek: split: add subschema property constraints
  • From: Moudy Ho (何宗原) <Moudy.Ho@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] ASoC: dt-bindings: davinci-mcasp: Fix interrupt properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: mfd: mediatek: mt6397: add adc, codec and regulators for mt6359
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIO
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: display: mediatek: split: add subschema property constraints
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 04/11] dt-bindings: iio: dac: ad3552r: fix maximum spi speed
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCHv2 5/5] documentation: use nvmem-layout in examples
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/bridge: sii902x: Provide data-lines property to input endpoint
  • From: Aradhya Bhatia <aradhya.bhatia@xxxxxxxxx>
• [PATCH] ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY ID
  • From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
• Re: [PATCH v10 3/3] drm/mediatek: Implement OF graphs support for display paths
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: display: bridge: sil,sii9022: Add data-lines
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• Re: [PATCH 2/2] reset: canaan: Add reset driver for Kendryte K230
  • From: Junhui Liu <liujh2818@xxxxxxxxx>
• Re: [PATCH v8 8/8] clk: Add KUnit tests for clks registered with struct clk_parent_data
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/9] arm64: dts: mediatek: mt8188: Add MIPI DSI nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v4] dt-bindings: display: mediatek: split: add subschema property constraints
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mfd: mediatek: mt6397: add adc and regulators for mt6359
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: mfd: mediatek: mt6397: add adc, codec and regulators for mt6359
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: mediatek: mt6359: fix dtbs_check error for RTC and regulators
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: display: mediatek: split: add subschema property constraints
  • From: Moudy Ho (何宗原) <Moudy.Ho@xxxxxxxxxxxx>
• [PATCH v3] dt-bindings: display: mediatek: split: add subschema property constraints
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• Re: [PATCH 22/33] riscv: signal: abstract header saving for setup_sigcontext
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: media: renesas,isp: Add Gen4 family fallback
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 8/8] clk: Add KUnit tests for clks registered with struct clk_parent_data
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 0/9] Add I2C mux devices for yosemite4
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 03/11] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 8/8] clk: Add KUnit tests for clks registered with struct clk_parent_data
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] of/kexec: save pa of initial_boot_params for arm64 and use it at kexec
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCHv2 5/5] documentation: use nvmem-layout in examples
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv2 4/5] arm64: dts: mediatek: 7886cax: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv2 3/5] arm64: dts: armada-3720-gl-mv1000: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv2 2/5] arm64: dts: bcm4908: nvmem-layout conversion
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv2 1/5] ARM: dts: qcom: ipq4019: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv2 0/5] devicetree: move nvmem-cells users to nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• Re: [PATCH v8 8/8] clk: Add KUnit tests for clks registered with struct clk_parent_data
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: display/msm: merge SC8280XP DPU into SC7280
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: display/msm: merge SM8550 DPU into SC7280
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: display/msm: merge SM8250 DPU into SM8150
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: display/msm: merge SM8450 DPU into SC7280
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: display/msm: merge SM8350 DPU into SC7280
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 5/5] documentation: use nvmem-layout in examples
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 03/11] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: "Edgecombe, Rick P" <rick.p.edgecombe@xxxxxxxxx>
• Re: [PATCH 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 0/2] Add support for Zyxel EX3510-B
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 5/5] documentation: use nvmem-layout in examples
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCH 4/5] arm64: dts: mediatek: 7886cax: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCH 3/5] arm64: dts: armada-3720-gl-mv1000: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCH 2/5] arm64: dts: bcm4908: nvmem-layout conversion
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCH 1/5] ARM: dts: qcom: ipq4019: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCH 0/5] devicetree: move nvmem-cells users to nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• RE: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v2 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• [PATCH v4 2/3] firmware: qcom: scm: Allow QSEECOM on Dell XPS 13 9345
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: arm: qcom: Add Dell XPS 13 9345
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• [PATCH v4 0/3] X1E Dell XPS 9345 support
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• Re: [PATCH v12 2/5] arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
  • From: Bryan Brattlof <bb@xxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: gpio: add support for NXP S32G2/S32G3 SoCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] of/kexec: save pa of initial_boot_params for arm64 and use it at kexec
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH v3 2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()y
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v7 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 4/4] arm64: dts: imx8qm-mek: Add PCIe and sata
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/4] arm64: dts: imx8qxp-mek: Add PCIe support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 2/4] arm64: dts: imx8dxl-evk: Add PCIe support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 1/4] arm64: dts: imx8-ss-hsio: Add PCIe support
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: "Kiran Kumar C.S.K" <quic_kkumarcs@xxxxxxxxxxx>
• Re: [PATCH v7 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()
  • From: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
• [PATCH v4 11/11] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 10/11] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 09/11] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 08/11] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 07/11] iio: dac: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 06/11] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 05/11] dt-bindings: iio: dac: ad3552r: add iio backend support
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 04/11] dt-bindings: iio: dac: ad3552r: fix maximum spi speed
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 03/11] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 01/11] iio: dac: adi-axi-dac: update register names
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 02/11] iio: dac: adi-axi-dac: fix wrong register bitfield
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v4 00/11] iio: add support for the ad3552r AXI DAC IP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH net-next v4 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v12 5/5] arm64: dts: ti: k3-am642-evm: Add M4F remoteproc node
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v12 1/5] arm64: dts: ti: k3-am62: Add M4F remoteproc node
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v12 4/5] arm64: dts: ti: k3-am642-sk: Add M4F remoteproc node
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v12 3/5] arm64: dts: ti: k3-am64: Add M4F remoteproc node
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v12 0/5] TI K3 M4F support on AM62 and AM64 SoCs
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v12 2/5] arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: Add the GE HealthCare PMC ADC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: display: bridge: tc358768: switch to bus-width
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] drm/bridge: tc358768: switch to bus-width
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• RE: [PATCH v1 2/2] Bluetooth: btnxpuart: Add GPIO support to power save feature
  • From: Shenwei Wang <shenwei.wang@xxxxxxx>
• Re: [PATCH 1/5] dt-bindings: mfd: x-powers,axp152: Document AXP323
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v8 0/2] Add driver for Sharp Memory LCD
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v2 2/2] Bluetooth: btnxpuart: Add GPIO support to power save feature
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIO
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• [PATCH v2 0/2] Bluetooth: btnxpuart: Add GPIO mechanism to
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• [PATCH v4 4/4] media: ov08x40: Add OF probe support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 3/4] media: ov08x40: Rename ext_clk to xvclk
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 0/4] ov08x40: Enable use of ov08x40 on Qualcomm X1E80100 CRD
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 1/4] media: ov08x40: Fix burst write sequence
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• RE: [PATCH v1 2/2] Bluetooth: btnxpuart: Add GPIO support to power save feature
  • From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
• Re: [PATCH RESEND] dt-bindings: fpga: altr,fpga-passive-serial: Convert to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 5/5] regulator: axp20x: add support for the AXP323
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 4/5] mfd: axp20x: Add support for AXP323
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 3/5] mfd: axp20x: Allow multiple regulators
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 2/5] mfd: axp20x: ensure relationship between IDs and model names
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: mfd: x-powers,axp152: Document AXP323
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 5/5] regulator: axp20x: add support for the AXP323
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings"
  • From: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
• [PATCH] Revert "arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings"
  • From: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8939: revert use of APCS mbox for RPM
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [PATCH v3 resend 2/7] nvmem: Add R-Car E-FUSE driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 0/7] Add Renesas R-Car Gen4 E-FUSE support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 7/7] arm64: dts: renesas: r8a779h0: Add OTP_MEM node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 4/7] arm64: dts: renesas: r8a779f0: Add E-FUSE node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 6/7] arm64: dts: renesas: r8a779g0: Add OTP_MEM node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 5/7] arm64: dts: renesas: r8a779f4: Add UFS tuning parameters in E-FUSE
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 1/7] dt-bindings: fuse: Move renesas,rcar-{efuse,otp} to nvmem
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v3 resend 3/7] arm64: dts: renesas: r8a779a0: Add E-FUSE node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: imu: migrate InvenSense email to TDK group domain
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v10 8/8] Documentation: coresight: Panic support
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: Add support for the GE HealthCare PMC ADC
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] drm/bridge: tc358768: switch to bus-width
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: display: bridge: tc358768: switch to bus-width
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: iio: imu: add entry for InvenSense MPU-6050 driver
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH v2 0/3] Update email addresses and add missing MAINTAINERS entry
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: imu: migrate InvenSense email to TDK group domain
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH v2 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• Re: [PATCH v10 7/8] coresight: config: Add preloaded configuration
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 2/2] dt-bindings: display: bridge: sil,sii9022: Add data-lines
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v10 5/8] coresight: tmc: Add support for reading crash data
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH net-next v4 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: imx8dxl-evk: Add PCIe support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v4 0/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: Add the GE HealthCare PMC ADC
  • From: Ian Ray <ian.ray@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/6] block: introduce add_disk_fwnode()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH net-next v4 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 1/4] drivers: provide devm_platform_get_and_ioremap_resource_byname()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] MAINTAINERS: add the GE HealthCare PMC ADC driver entry
  • From: Ian Ray <ian.ray@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: Add support for the GE HealthCare PMC ADC
  • From: Ian Ray <ian.ray@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: display: bridge: sil,sii9022: Add data-lines
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add an entry for GE HealthCare
  • From: Ian Ray <ian.ray@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 4/4] MAINTAINERS: add the GE HealthCare PMC ADC driver entry
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v2 3/4] iio: adc: Add support for the GE HealthCare PMC ADC
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: iio: adc: Add the GE HealthCare PMC ADC
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add an entry for GE HealthCare
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v2 0/4] Add support for the GE HealthCare PMC ADC
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] of/kexec: save pa of initial_boot_params for arm64 and use it at kexec
  • From: Usama Arif <usamaarif642@xxxxxxxxx>
• Re: [RFC v1 5/5] dt-bindings: riscv: document vector crypto requirements
  • From: Clément Léger <cleger@xxxxxxxxxxxx>
• Re: [PATCH v1 08/11] clk: move meson clk-regmap implementation to common code
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 2/7] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4 1/3] arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 7/7] wifi: wilc1000: Add WILC3000 support
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v7 6/7] wifi: wilc1000: Register wiphy after reading out chipid
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v7 4/7] wifi: wilc1000: Fill in missing error handling
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v7 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v7 5/7] wifi: wilc1000: Fold wilc_create_wiphy() into cfg80211.c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v7 3/7] wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v7 1/7] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v4 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v4 0/2] Compute HS HCNT and LCNT based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH 5/5] regulator: axp20x: add support for the AXP323
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 4/5] mfd: axp20x: Add support for AXP323
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 3/5] mfd: axp20x: Allow multiple regulators
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 2/5] mfd: axp20x: ensure relationship between IDs and model names
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 1/5] dt-bindings: mfd: x-powers,axp152: Document AXP323
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 0/5] regulator: add X-Powers AXP323 support
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC v1 5/5] dt-bindings: riscv: document vector crypto requirements
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/3] arm64: dts: qcom: sc8280xp-crd: enable bluetooth
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC v1 2/5] RISC-V: add f & d extension validation checks
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH net-next v4 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs
  • From: <Divya.Koppera@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: display: mediatek: split: add clocks count constraint for MT8195
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: clock: imx8m-anatop: support spread spectrum clocking
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH net-next v4 2/2] net: phy: Add support for PHY timing-role configuration via device tree
  • From: <Divya.Koppera@xxxxxxxxxxxxx>
• [PATCH RESEND] dt-bindings: fpga: altr,fpga-passive-serial: Convert to yaml
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: net: Add T-HEAD dwmac support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/3] arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 4/4] media: admin-guide: Document the Raspberry Pi CFE (rp1-cfe)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 2/4] dt-bindings: media: Add bindings for raspberrypi,rp1-cfe
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 1/4] media: uapi: Add meta formats for PiSP FE config and stats
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 0/4] media: raspberrypi: Support RPi5's CFE
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: sa8775p: Update iommu-map entry
  • From: Subramanian Ananthanarayanan <quic_skananth@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: gpio: add support for NXP S32G2/S32G3 SoCs
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH net] dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: display: bridge: sil,sii9022: Add data-lines
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v4 0/5] block: partition table OF support
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v1 5/5] dt-bindings: riscv: document vector crypto requirements
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v1 4/5] dt-bindings: riscv: add vector sub-extension dependencies
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v1 3/5] dt-bindings: riscv: d requires f
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 5/5] arm64: dts: rockchip: rk356x: Drop rockchip prefix from s-p-c PMIC property
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• [PATCH 4/5] arm64: dts: rockchip: rk3399: Drop rockchip prefix from s-p-c PMIC property
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• [PATCH 3/5] arm64: dts: rockchip: rk3368: Drop rockchip prefix from s-p-c PMIC property
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• [PATCH 2/5] arm64: dts: rockchip: rk3328: Drop rockchip prefix from s-p-c PMIC property
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• [PATCH 0/5] Drop deprecated 'rockchip' prefix from s-p-c PMIC property
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• [PATCH 1/5] arm64: dts: rockchip: px30: Drop rockchip prefix from s-p-c PMIC property
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• Re: [PATCH 1/2] drm/bridge: sii902x: Provide data-lines property to input endpoint
  • From: Aradhya Bhatia <aradhya.bhatia@xxxxxxxxx>
• Re: [PATCH v8 0/2] Add driver for Sharp Memory LCD
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v7 1/6] misc: Add support for LAN966x PCI device
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: display/msm: Document MDSS on SA8775P
  • From: Mahadevan P <quic_mahap@xxxxxxxxxxx>
• Re: [PATCH v2 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: nvmem: mediatek: efuse: Reuse mt8186-efuse in mt8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/9] arm64: dts: mediatek: mt8188: Add MIPI DSI nodes
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH] ASoC: dt-bindings: davinci-mcasp: Fix interrupt properties
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: net: can: atmel: Convert to json schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 1/2] drm/bridge: sii902x: Provide data-lines property to input endpoint
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: display: bridge: sil,sii9022: Add data-lines
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• [PATCH v7 6/6] reset: mchp: sparx5: set the dev member of the reset controller
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v7 5/6] reset: mchp: sparx5: Allow building as a module
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v7 4/6] reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v7 3/6] reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v7 2/6] MAINTAINERS: Add the Microchip LAN966x PCI driver entry
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v7 1/6] misc: Add support for LAN966x PCI device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v7 0/6] Add support for the LAN966x PCI device using a DT overlay
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: display/msm: merge SM8550 DPU into SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/5] dt-bindings: display/msm: merge SM8450 DPU into SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: display/msm: merge SM8350 DPU into SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: display/msm: merge SM8250 DPU into SM8150
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/5] dt-bindings: display/msm: merge SC8280XP DPU into SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/5] dt-bindings: display/msm: dpu: merge bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: nvmem: mediatek: efuse: Reuse mt8186-efuse in mt8188
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 2/7] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
  • From: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
• Re: [RFC v1 5/5] dt-bindings: riscv: document vector crypto requirements
  • From: Clément Léger <cleger@xxxxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: display/msm: Document the DPU for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: display/msm: Document MDSS on SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v1 4/5] dt-bindings: riscv: add vector sub-extension dependencies
  • From: Clément Léger <cleger@xxxxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: display/msm: Document MDSS on SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v1 2/5] RISC-V: add f & d extension validation checks
  • From: Clément Léger <cleger@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: xilinx: Add clocks & clock-names properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v1 3/5] dt-bindings: riscv: d requires f
  • From: Clément Léger <cleger@xxxxxxxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 9/9] ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 8/9] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 7/9] ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 6/9] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 5/9] ARM: dts: aspeed: yosemite4: correct the compatible string for max31790
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 4/9] ARM: dts: aspeed: yosemite4: Add required properties for IOE on fan boards
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 3/9] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 2/9] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 1/9] ARM: dts: aspeed: yosemite4: add i2c-mux for all Server Board slots
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 0/9] Add I2C mux devices for yosemite4
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: spi: xilinx: Add clocks & clock-names properties
  • From: "Mahapatra, Amit Kumar" <amit.kumar-mahapatra@xxxxxxx>
• RE: [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs
  • From: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: imu: migrate InvenSense email to TDK group domain
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH 1/3] MAINTAINERS: iio: migrate invensense email address to tdk domain
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH 0/3] Update email addresses and add missing MAINTAINERS entry
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH 3/3] MAINAINERS: iio: imu: add entry for InvenSense MPU-6050 driver
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• Re: [PATCH v5 1/5] dt-bindings: arm: qcom: add Linksys EA9350 V3
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH v2 07/10] ARM: dts: aspeed: yosemite4: correct the compatible string for max31790
  • From: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: si5351: Make compatible string required property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 9/9] arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 8/9] arm64: dts: mediatek: mt8188: Add DP-INTF nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 7/9] arm64: dts: mediatek: mt8188: Add display nodes for vdosys1
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 6/9] arm64: dts: mediatek: mt8188: Add display nodes for vdosys0
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 5/9] arm64: dts: mediatek: mt8188: Add JPEG decoder and encoder nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 4/9] arm64: dts: mediatek: mt8188: Add video decoder and encoder nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 3/9] arm64: dts: mediatek: mt8188: Add MIPI DSI nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 1/9] arm64: dts: mediatek: mt8188: Assign GCE aliases
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH v2 0/9] Add platform supports to MediaTek MT8188 SoC (part 2)
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: xilinx: Add clocks & clock-names properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: spi: xilinx: Add clocks & clock-names properties
  • From: "Mahapatra, Amit Kumar" <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: si5351: Make compatible string required property
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v3 2/3] net: stmmac: Add glue layer for T-HEAD TH1520 SoC
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mailbox: qcom,cpucp-mbox: Add sc7280 cpucp mailbox instance
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mailbox: qcom,cpucp-mbox: Add sc7280 cpucp mailbox instance
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 2/3] mailbox: qcom-cpucp-mbox: Add support for SC7280 CPUCP mailbox controller
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sc7280: Add cpucp mbox node
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 0/3] PCI: dwc: opitimaze RC host pci_fixup_addr()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2] dt-bindings: net: can: atmel: Convert to json schema
  • From: Charan Pedumuru <charan.pedumuru@xxxxxxxxxxxxx>
• RE: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v6 4/4] dt-bindings: display: mediatek: dpi: correct power-domains property
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH v6 3/4] arm64: dts: mt8195: Fix dtbs_check error for mutex node
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH v6 2/4] arm64: dts: mediatek: mt8395-genio-1200-evk: Fix dtbs_check error for phy
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH v6 1/4] dt-bindings: iommu: mediatek: Fix interrupt count constraint for new SoCs
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v3 2/8] pinctrl: Add driver for the T-Head TH1520 SoC
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/2] Add driver for Sharp Memory LCD
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH RFT] of: property: fw_devlink: Add support for the "phy-handle" binding
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH v8 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] pinctrl: Add T-Head TH1520 SoC pin controllers
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 07/11] dt-bindings: clk: microchip: mpfs: remove first reg region
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
  • From: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
• [PATCH v5 4/5] pinctrl: qcom: ipq5018: allow it to be bulid on arm32
  • From: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
• [PATCH v5 3/5] clk: qcom: ipq5018: allow it to be bulid on arm32
  • From: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
• [PATCH v5 2/5] arm64: dts: qcom: add Linksys EA9350 V3
  • From: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: arm: qcom: add Linksys EA9350 V3
  • From: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
• [PATCH v5 0/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
  • From: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 03/11] dt-bindings: mfd: syscon document the non simple-mfd syscon on PolarFire SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 04/11] dt-bindings: soc: microchip: document the two simple-mfd syscons on PolarFire SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 01/11] dt-bindings: mailbox: mpfs: fix reg properties
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH] arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs
  • From: Nathan Morrisson <nmorrisson@xxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 6/6] dt-bindings: mmc: Document support for partition table in mmc-card
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 5/6] block: add support for partition table defined in OF
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 4/6] mmc: block: attach partitions fwnode if found in mmc-card
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 3/6] block: introduce add_disk_fwnode()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 2/6] docs: block: Document support for read-only partition in cmdline part
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 1/6] block: add support for defining read-only partitions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 0/6] block: partition table OF support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: si5351: Make compatible string required property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
  • From: Frank Li <Frank.Li@xxxxxxx>