Linux Device Tree
[Prev Page][Next Page]
- [PATCH v9 4/7] arm64: dts: qcom: ipq5332: Add tsens node
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH v9 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH v9 2/7] dt-bindings: nvmem: Add compatible for IPQ5424
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH v9 1/7] dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH v9 0/7] Add TSENS support for IPQ5332, IPQ5424
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH v4 2/4] dmaengine: gpi: Add Lock and Unlock TRE support to access I2C exclusively
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH v5 6/7] scsi: ufs: rockchip: initial support for UFS
- From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: qcs8300-ride: enable ethernet0
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- RE: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
- From: "Encarnacion, Cedric justine" <Cedricjustine.Encarnacion@xxxxxxxxxx>
- Re: [PATCH v4 1/2] arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- Re: [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
- From: fange zhang <quic_fangez@xxxxxxxxxxx>
- RE: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: "Encarnacion, Cedric justine" <Cedricjustine.Encarnacion@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: mfd: cros-ec: add properties for thermal cooling cells
- From: "Sung-Chi, Li" <lschyi@xxxxxxxxxxxx>
- RE: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
- From: "Encarnacion, Cedric justine" <Cedricjustine.Encarnacion@xxxxxxxxxx>
- Re: [PATCH 1/2] power: supply: cros_usbpd-charger: extend as a thermal of cooling device
- From: "Sung-Chi, Li" <lschyi@xxxxxxxxxxxx>
- Re: [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
- From: fange zhang <quic_fangez@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
- From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindgins: display: Add Apple pre-DCP display controller bindings
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
- From: fange zhang <quic_fangez@xxxxxxxxxxx>
- Re: [PATCH v2] libfdt: Remove fdt parameter from overlay_fixup_one_phandle
- From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: display: simple: Document Multi-Inno Technology MI0700A2T-30 panel
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH 2/2] drm/panel: simple: add Multi-Inno Technology MI0700A2T-30
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH RFC net-next v6 13/15] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 15/15] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 12/15] net: dwmac-sti: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 14/15] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 11/15] net: xgene_enet: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 09/15] net: dwmac-starfive: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 10/15] net: macb: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 07/15] net: dwmac-intel-plat: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 08/15] net: dwmac-rk: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 06/15] net: dwmac-imx: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 04/15] net: phy: Add helper for mapping RGMII link speed to clock rate
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 05/15] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 01/15] net: driver: stmmac: Fix CSR divider comment
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 02/15] net: driver: stmmac: Extend CSR calc support
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 03/15] net: stmmac: Fix clock rate variables size
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH RFC net-next v6 00/15] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH 5/5] MAINTAINERS: Add entries for touchbar display driver
- From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@xxxxxxxxxx>
- [PATCH 2/5] gpu: drm: adp: Add Apple Display Pipe driver
- From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@xxxxxxxxxx>
- [PATCH 3/5] gpu: drm: adp: Add a backlight driver for the Summit LCD
- From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@xxxxxxxxxx>
- [PATCH 4/5] arm64: dts: apple: Add touchbar screen nodes
- From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@xxxxxxxxxx>
- [PATCH 0/5] Driver for pre-DCP apple display controller.
- From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@xxxxxxxxxx>
- [PATCH 1/5] dt-bindgins: display: Add Apple pre-DCP display controller bindings
- From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@xxxxxxxxxx>
- Re: [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/4] arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14
- From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
- From: Haylen Chu <heylenay@xxxxxxx>
- Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/6] dt-bindings: display: panel: Add another panel for RG35XX Plus (Rev6)
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 9/9] ARM: dts: broadcom: Add Genexis XG6846B DTS file
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 2/9] ARM: dts: bcm6846: Enable watchdog
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v5 16/16] doc: iio: ad4695: add SPI offload support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 34/36] arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v5 06/16] spi: add offload TX/RX streaming APIs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v5 09/16] iio: buffer-dmaengine: document iio_dmaengine_buffer_setup_ext
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: display: ti,am65x-dss: Re-indent the example
- From: Aradhya Bhatia <aradhya.bhatia@xxxxxxxxx>
- [PATCH v3 0/3] Add support for attaching a regulator to w1: ds2482
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- Re: [PATCH v5 06/16] spi: add offload TX/RX streaming APIs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/4] arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v5 16/16] doc: iio: ad4695: add SPI offload support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: meraki-mr26: set mac address for gmac0
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v5 01/16] spi: add basic support for SPI offloading
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 4/9] ARM: dts: bcm6846: Add MDIO control block
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 05/16] rust: implement `IdArray`, `IdTable` and `RawDeviceId`
- From: Sasha Finkelstein <fnkl.kernel@xxxxxxxxx>
- [PATCH] arm64: dts: apple: t8112: fix typo in comment
- From: Alyssa Ross <hi@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: arm: bcmbca: Add Genexis XG6846B
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 7/9] dt-bindings: vendor-prefixes: Add Genexis
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 6/9] ARM: dts: bcm6846: Add ARM PL081 DMA block
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 5/9] ARM: dts: bcm6846: Add LED controller
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 3/9] ARM: dts: bcm6846: Add GPIO blocks
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 1/9] ARM: dts: bcm6846: Add iproc rng
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH] arm: dts: broadcom: Remove unused and undocumented properties
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: broadcom: Remove unused and undocumented properties
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v5 15/16] iio: adc: ad4695: Add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 13/16] doc: iio: ad7944: describe offload support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 12/16] iio: adc: ad7944: add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [GIT PULL] Devicetree updates for v6.13
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH v5 10/16] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 35/36] arm64: dts: broadcom: Add display pipeline support to BCM2712
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v2 36/36] arm64: dts: broadcom: Add DT for D-step version of BCM2712
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH] WIP: arm64: dts: meson: drop broadcom compatible from reference board SDIO nodes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 08/16] spi: axi-spi-engine: implement offload support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [GIT PULL] Devicetree updates for v6.13
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v3 2/3] w1: ds2482: Fix datasheet URL
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- Re: [PATCH v5 05/16] spi: offload-trigger: add PWM trigger driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 02/16] spi: offload: add support for hardware triggers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 01/16] spi: add basic support for SPI offloading
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [GIT PULL] Devicetree updates for v6.13
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH v3 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v3 1/3] w1: ds2482: Add regulator support
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- Re: [PATCH v3 4/4] iio: adc: ad4000: Add support for PulSAR devices
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: display: panel: Add another panel for RG35XX Plus (Rev6)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: display: panel: Add a panel for RG CubeXX
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/6] dt-bindings: display: panel: Add a panel for RG40XX series
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: display: panel: Add another panel for RG35XX Plus (Rev6)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
- From: Yixun Lan <dlan@xxxxxxxxxx>
- Re: [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v8 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH v4 3/3] drm/tidss: Add OLDI bridge support
- From: Aradhya Bhatia <aradhya.bhatia@xxxxxxxxx>
- [PATCH v4 2/3] dt-bindings: display: ti: Add schema for AM625 OLDI Transmitter
- From: Aradhya Bhatia <aradhya.bhatia@xxxxxxxxx>
- [PATCH v4 0/3] drm/tidss: Add OLDI bridge support
- From: Aradhya Bhatia <aradhya.bhatia@xxxxxxxxx>
- Re: [PATCH v8 2/7] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 4/6] drm: panel: nv3052c: Add a panel for RG40XX series
- From: Philippe Simons <simons.philippe@xxxxxxxxx>
- Re: [PATCH 10/15] ARM: configs: at91: sama7: add new SoC config
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH 3/4] drm/panel-edp: Add unknown BOE panel for HP Omnibook X14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH 4/4] arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH 2/4] firmware: qcom: scm: Allow QSEECOM for HP Omnibook X14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH 1/4] dt-bindings: arm: qcom: Add HP Omnibook X 14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH 0/4] arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 15/15] clk: at91: sama7d65: add sama7d65 pmc driver
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 6/6] drm: panel: nv3052c: Add a panel for RG CubeXX
- From: Philippe Simons <simons.philippe@xxxxxxxxx>
- Re: [PATCH 0/2] iio: adc: ad4695: move dt-bindings header
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add driver for ADS7128 / ADS7138
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Maud Spierings <maud_spierings@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: phy: Add Rockchip MIPI CSI/DSI PHY schema
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: power/supply: Add ltc4162-f/s and ltc4015
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v4 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 05/10] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 1/3] w1: ds2482: Add regulator support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] w1: ds2482: Add regulator support
- From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
- [PATCH v2 2/2] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v2 1/2] of/unittest: Add empty dma-ranges address translation tests
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v2 0/2] Preserve the flags portion on 1:1 dma-ranges mapping
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v3 0/4] Asus vivobook s15 improvements
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v3 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v3 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v3 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v3 2/2] arm64: dts: mediatek: Introduce MT8188 Geralt platform based Ciri
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: arm: mediatek: Add MT8188 Lenovo Chromebook Duet (11", 9)
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH v3 0/2] Add device tree for MT8188-based Chromebook "Ciri"
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema
- From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
- [PATCH] WIP: arm64: dts: meson: drop broadcom compatible from reference board SDIO nodes
- From: Christian Hewitt <christianshewitt@xxxxxxxxx>
- [PATCH 6/6] drm: panel: nv3052c: Add a panel for RG CubeXX
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- [PATCH 5/6] dt-bindings: display: panel: Add a panel for RG CubeXX
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- [PATCH 4/6] drm: panel: nv3052c: Add a panel for RG40XX series
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- [PATCH 3/6] dt-bindings: display: panel: Add a panel for RG40XX series
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- [PATCH 2/6] drm: panel: nv3052c: Add another panel for RG35XX Plus (Rev6)
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- [PATCH 1/6] dt-bindings: display: panel: Add another panel for RG35XX Plus (Rev6)
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- [PATCH 0/6] drm/panel: nv3052c: Add support for new Anbernic panels
- From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
- Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
- From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v4 2/2] power/supply: Add support for ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: power/supply: Add ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- Re: [PATCH V4 2/2] arm64: dts: qcom: qcs8300: add TRNG node
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- Re: [PATCH v3 5/6] PCI: qcom: Add support for host_stop_link() & host_start_link()
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- [PATCH v7 6/8] arm64: dts: qcom: Add initial support for MSM8917
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 3/8] pinctrl: qcom: Add MSM8917 tlmm pinctrl driver
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 7/8] dt-bindings: arm: qcom: Add Xiaomi Redmi 5A
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 8/8] arm64: dts: qcom: Add Xiaomi Redmi 5A
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 5/8] dt-bindings: nvmem: Add compatible for MS8917
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 2/8] dt-bindings: pinctrl: qcom: Add MSM8917 pinctrl
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 0/8] Add MSM8917/PM8937/Redmi 5A
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 1/8] arm64: dts: qcom: Add PM8937 PMIC
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- [PATCH v7 4/8] dt-bindings: iommu: qcom,iommu: Add MSM8917 IOMMU to SMMUv1 compatibles
- From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
- Re: [PATCH v2 08/11] drm/msm: adreno: request for maximum bus bandwidth usage
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 2/2] phy: rockchip: naneng-combphy: fix phy reset
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v6 2/5] dt-bindings: sound: Add Allwinner suniv F1C100s Audio Codec
- From: Csókás Bence <csokas.bence@xxxxxxxxx>
- Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
- From: Conor Dooley <conor@xxxxxxxxxx>
- [no subject]
- Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: qcs8300-ride: enable ethernet0
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v4 1/2] arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
- From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
- Re: [PATCH v2 02/11] drm/msm: adreno: rename quirks that are features
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v3 06/10] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series
- From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
- Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
- From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
- Re: Re: [PATCH v3 08/10] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0
- From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
- Re: [PATCH RFC 2/2] arm64: dts: qcom: sm8650: move board clocks to DTS files
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH RFC 1/2] arm64: dts: qcom: sm8450: move board clocks to DTS files
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [v10,3/3] drm/rockchip: Add basic RK3588 HDMI output support
- From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: arm: qcom,ids: add board ID for CDP
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 0/2] Support for TI ADS7128 and ADS7138 ADCs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] EDAC: Versal NET: Add support for error notification
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: memory-controllers: Add support for Versal NET EDAC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 8/8] iio: accel: kx022a: Support KX134-1211
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/8] iio: accel: kx022a: Use cleanup.h helpers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/4] arm64: dts: qcom: sm8750: CDSP and modem
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm-smmu: document QCS615 GPU SMMU
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/8] iio: gts: Simplify using __free
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/8] iio: accel: kx022a: Improve reset delay
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] w1: ds2482: Add regulator support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/9] dt-bindings: display/msm: Add SM6150 DSI phy
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 0/9] Add display support for QCS615 platform
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 2/5] dt-bindings: sound: Add Allwinner suniv F1C100s Audio Codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: arm: mediatek: Add MT8186 Starmie Chromebooks
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: frequency: adf4371: add ref doubler and div2
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 0/9] Add display support for QCS615 platform
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 3/8] iio: backend: add API for oversampling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 3/8] iio: backend: add API for oversampling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [v10,3/3] drm/rockchip: Add basic RK3588 HDMI output support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 0/4] iio: accel: fxls8962af: add fxls8967af and fxls8974cf
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: gyro: Add support for iam20380 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/4] iio: adc: ad7124: Make it work on de10-nano
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v2 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v2 0/4] Asus vivobook s15 improvements
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH v6 5/5] ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v6 4/5] ARM: dts: suniv: f1c100s: Add support for Audio Codec
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v6 2/5] dt-bindings: sound: Add Allwinner suniv F1C100s Audio Codec
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH 0/4] Asus vivobook s15 improvements
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- [PATCH 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
- From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
- Re: [PATCH v2 10/10] MIPS: mobileye: eyeq6h: add OLB nodes OLB and remove fixed clocks
- From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 09/10] MIPS: mobileye: eyeq5: use OLB as provider for fixed factor clocks
- From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] mips: dts: realtek: Add SPI NAND controller
- From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
- From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v2] libfdt: Remove fdt parameter from overlay_fixup_one_phandle
- From: Bingwu Zhang <xtex@xxxxxxxx>
- [PATCH v4 2/2] arm64: dts: qcom: qcs8300-ride: enable ethernet0
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- [PATCH v4 1/2] arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- [PATCH v4 0/2] Enable ethernet for qcs8300
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- [PATCH] dt-bindings: arm: qcom,ids: add board ID for CDP
- From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
- Re: [PATCH v5 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v5 7/7] arm64: dts: rockchip: Add UFS support for RK3576 SoC
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 5/7] scsi: ufs: core: Export ufshcd_dme_reset() and ufshcd_dme_enable()
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 6/7] scsi: ufs: rockchip: initial support for UFS
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH] MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
- From: Xi Ruoyao <xry111@xxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 0/4] arm64: dts: qcom: sm8750: CDSP and modem
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 07/10] iio: adc: ad_sigma_delta: Store information about reset sequence length
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 06/10] iio: adc: ad_sigma_delta: Fix a race condition
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 04/10] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: phy: Add Rockchip MIPI CSI/DSI PHY schema
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: pwm: marvell,berlin-pwm: Convert from txt to yaml
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v3 0/2] MIPI DSI phy for rk3588
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: pwm: sprd,ums512-pwm: convert to YAML
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v7 2/2] pwm: Add Loongson PWM controller support
- From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
- Re: [PATCH v6 10/10] arm64: dts: imx95: Add ref clock for i.MX95 PCIe
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 04/10] PCI: imx6: Correct controller_id generation logic for i.MX7D
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 05/10] PCI: imx6: Make core reset assertion deassertion symmetric
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [PATCH v6 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 7/8] iio: adc: ad7606: Add iio-backend support
- From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
- Re: [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v6 3/5] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v6 5/5] ARM: dts: suniv: f1c100s: Add support for DMA
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v5 0/5] Add support for DMA of F1C100s
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- Re: [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [no subject]
- Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- [PATCH 4/4] arm64: dts: qcom: sm8750-qrd: Enable CDSP and mention MPSS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 3/4] arm64: dts: qcom: sm8750-mtp: Enable CDSP and mention MPSS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 2/4] arm64: dts: qcom: sm8750: Add Modem / MPSS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 1/4] arm64: dts: qcom: sm8750: Add CDSP
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 0/4] arm64: dts: qcom: sm8750: CDSP and modem
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH 2/2] iio: adc: Add driver for ADS7128 / ADS7138
- From: Tobias Sperling via B4 Relay <devnull+tobias.sperling.softing.com@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138
- From: Tobias Sperling via B4 Relay <devnull+tobias.sperling.softing.com@xxxxxxxxxx>
- [PATCH 0/2] Support for TI ADS7128 and ADS7138 ADCs
- From: Tobias Sperling via B4 Relay <devnull+tobias.sperling.softing.com@xxxxxxxxxx>
- Re: [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH V4 2/2] arm64: dts: qcom: qcs8300: add TRNG node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1 3/7] drm/mediatek: mtk_cec: Switch to register as module_platform_driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH V2 2/2] arm64: dts: qcom: qcs8300: enable the inline crypto engine
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/4] dmaengine: gpi: Add Lock and Unlock TRE support to access I2C exclusively
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH V2 2/2] arm64: dts: qcom: qcs8300: enable the inline crypto engine
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH V2 2/2] arm64: dts: qcom: qcs8300: enable the inline crypto engine
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH V2 0/2] Enable Inline crypto engine for QCS8300
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- [PATCH V2 1/2] dt-bindings: crypto: ice: document the qcs8300 inline crypto engine
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v8 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH 10/12] arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 08/12] arm64: dts: renesas: Add initial DTSI for RZ/G3E SoC
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 09/12] arm64: dts: renesas: Add initial support for RZ/G3E SMARC SoM
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 04/12] dt-bindings: clock: renesas: Document RZ/G3E SoC CPG
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 01/12] dt-bindings: serial: renesas: Document RZ/G3E (r9a09g047) scif
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 03/12] dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 00/12] Add support for Renesas RZ/G3E SoC and SMARC-EVK platform
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 02/12] dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 4/4] arm64: dts: qcom: ipq5424: configure spi0 node for rdp466
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH 3/4] arm64: dts: qcom: ipq5424: add spi0 node
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH 2/4] pinctrl: qcom: ipq5424: split spi0 pin group
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH 1/4] dt-bindings: pinctrl: qcom: update spi0 function
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH 0/4] Add SPI0 support for IPQ5424
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v8 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH] of/fdt: Implement use BIN_ATTR_SIMPLE macro for fdt sysfs attribute
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 07/10] iio: adc: ad_sigma_delta: Store information about reset sequence length
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 06/10] iio: adc: ad_sigma_delta: Fix a race condition
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 04/10] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 03/10] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 02/10] iio: adc: ad7124: Refuse invalid input specifiers
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v3 00/10] iio: adc: ad7124: Various fixes
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH 2/2] iio: frequency: adf4371: add ref doubler and div2
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sa8775p: pmic: enable rtc
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v1 2/2] arm64: dts: mediatek: mt8186: Add Starmie device
- From: Wojciech Macek <wmacek@xxxxxxxxxxxx>
- [PATCH v1 1/2] dt-bindings: arm: mediatek: Add MT8186 Starmie Chromebooks
- From: Wojciech Macek <wmacek@xxxxxxxxxxxx>
- [PATCH v1 0/2] Add Starmie Chromebooks
- From: Wojciech Macek <wmacek@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sa8775p: pmic: enable rtc
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/2] power: supply: cros_usbpd-charger: extend as a thermal of cooling device
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 3/3] EDAC: Versal NET: Add support for error notification
- From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
- [PATCH 2/3] cdx: add DDRMC commands
- From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
- [PATCH 1/3] dt-bindings: memory-controllers: Add support for Versal NET EDAC
- From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
- [PATCH 0/3] EDAC: Versal NET: Add support for error notification
- From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
- Re: [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 1/9] dt-bindings: display/msm: Add SM6150 DSI phy
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v3 0/9] Add display support for QCS615 platform
- From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v2] arm64: zynqmp: add clock-output-names property in clock nodes
- From: Naman Trivedi <naman.trivedimanojbhai@xxxxxxx>
- [PATCH v3 RESEND 10/10] arm64: dts: apple: t8015: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 09/10] arm64: dts: apple: t8011: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 08/10] arm64: dts: apple: t8010: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 07/10] arm64: dts: apple: s8001: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 06/10] arm64: dts: apple: s8000: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 05/10] arm64: dts: apple: t7001: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 04/10] arm64: dts: apple: t7000: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 03/10] arm64: dts: apple: s5l8960x: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 02/10] dt-bindings: arm: apple: apple,pmgr-pwrstate: Add A7-A11 compatibles
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 01/10] dt-bindings: arm: apple: apple,pmgr: Add A7-A11 compatibles
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v3 RESEND 00/10] Add PMGR nodes for Apple A7-A11 SoCs
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: qcs615: add the GPU SMMU node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH 2/2] remoteproc: qcom: pas: Add SM8750 MPSS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: remoteproc: Add SM8750 MPSS and CDSP
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v2 2/3] w1: ds2482: Fix datasheet URL
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v2 0/3] Add support for attaching a regulator to w1: ds2482
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v2 1/3] w1: ds2482: Add regulator support
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/1] rust: Add bindings for device properties
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
- From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
- Re: [PATCH V4 0/5] arm_scmi: vendors: Qualcomm Generic Vendor Extensions
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 2/8] serial: sh-sci: Check if TX data was written to device in .tx_empty()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH RFC v2 1/1] rust: Add bindings for device properties
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: rockchip: rk3568: add reset-names for combphy
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- [PATCH 2/2] ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH 0/2] Add power monitor support on sam9x75-curiosity board
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] phy: rockchip: naneng-combphy: fix phy reset
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: rockchip: rk3568: add reset-names for combphy
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: qcs615: add the GPU SMMU node
- From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm-smmu: document QCS615 GPU SMMU
- From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
- [PATCH 0/2] Add support for GPU SMMU on QCS615
- From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: mfd: cros-ec: add properties for thermal cooling cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH V4 0/2] Enable TRNG for QCS8300
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- [PATCH V4 1/2] dt-bindings: crypto: qcom,prng: document QCS8300
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- [PATCH V4 2/2] arm64: dts: qcom: qcs8300: add TRNG node
- From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/2] phy: rockchip: naneng-combphy: fix phy reset
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- [PATCH 1/2] arm64: dts: rockchip: rk3568: add reset-names for combphy
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH v1 6/6] drm/mediatek: Add support for MT8195 Digital Parallel Interface
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
- From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
- [PATCH v3 0/2] Enable SDHC1 and SDHC2 on QCS615
- From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
- [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: enable SDHC1 and SDHC2
- From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
- [PATCH v3 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: qcom: qcs615-ride: Enable UFS node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v3 0/3] Enable UFS on QCS615
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
- Re: [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH 2/2] dt-bindings: mfd: cros-ec: add properties for thermal cooling cells
- From: Sung-Chi Li <lschyi@xxxxxxxxxxxx>
- [PATCH 1/2] power: supply: cros_usbpd-charger: extend as a thermal of cooling device
- From: Sung-Chi Li <lschyi@xxxxxxxxxxxx>
- [PATCH 0/2] Extend the cros_usbpd-charger to make it a passive thermal cooling device
- From: Sung-Chi Li <lschyi@xxxxxxxxxxxx>
- RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Ying Liu <victor.liu@xxxxxxx>
- [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 0/6] pci: qcom: Add QCS615 PCIe support
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- Re: [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: quic_zijuhu <quic_zijuhu@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: qcom,dwc3: Make ss_phy_irq optional for X1E80100
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 1/3] arm64: dts: qcom: x1e80100-romulus: Configure audio
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 0/3] More Surface Laptop 7 features
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 0/6] pci: qcom: Add QCS615 PCIe support
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- Re: [PATCH v1 2/6] drm/mediatek: mtk_dpi: Add support for Pattern Generator in debugfs
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [no subject]
- Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
- From: "Sung-Chi, Li" <lschyi@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Add standalone ethernet MAC entries for qcs615
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: net: qcom,ethqos: revise description for qcs615
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- Re: [PATCH v2 0/6] Revise Meta(Facebook) Harma BMC(AST2600)
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: aspeed: catalina: revise catalina dts file
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 9/9] drm/vs: Add VS DRM Master Driver for JH7110 SoC
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 7/9] drm/vs: Add VS Plane API
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 6/9] drm/vs: Add CRTC Functions
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 5/9] drm/vs: Add Base API for VS Mode Configuration
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 8/9] drm/vs: Add Innosilicon HDMI Support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- RE: [PATCH v7 3/3] clk: aspeed: add AST2700 clock driver.
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v4 15/18] dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 30/37] clk: bcm: rpi: Add ISP to exported clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 31/37] clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 32/37] clk: bcm: rpi: Enable minimize for all firmware clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 33/37] clk: bcm: rpi: Create helper to retrieve private data
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 34/37] clk: bcm: rpi: Add disp clock
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 2/2] serial: fsl_linflexuart: add clock management
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] of: property: fw_devlink: Do not use interrupt-parent directly
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 2/8] serial: sh-sci: Check if TX data was written to device in .tx_empty()
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: rockchip: Add devicetree for the ROC-RK3576-PC
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v9 2/3] dt-bindings: leds: Add LED1202 LED Controller
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v2 7/8] dt-bindings: iio: kx022a: Support KX134-1211
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH 0/2] Drop QPIC related interconnect and BCM nodes on
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb node on QCS615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v7 3/3] leds: Add LED1202 I2C driver
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: aspeed: catalina: revise catalina dts file
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v9] leds: Add LED1202 I2C driver
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v9 2/3] dt-bindings: leds: Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v9 1/3] Documentation:leds: Add leds-st1202.rst
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v9 0/3] Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] PCI/pwrctl: Do not assume device node presence
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
- Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add microchip USB5807 HUB
- From: AKASH KUMAR <quic_akakum@xxxxxxxxxxx>
- Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- [PATCH v2 4/4] media: rcar-csi2: Allow specifying C-PHY line order
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v2 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v2 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v2 0/4] media: v4l: fwnode: Add support for CSI-2 C-PHY line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 2/2] iio: light: Add support for TI OPT4060 color sensor
- From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
- From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
- From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] arm64: zynqmp: add clock-output-names property in clock nodes
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
- [PATCH] arm64: zynqmp: add clock-output-names property in clock nodes
- From: Naman Trivedi <naman.trivedimanojbhai@xxxxxxx>
- RE: [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
- From: Peng Fan <peng.fan@xxxxxxx>
- [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V5 0/4] Add EPSS L3 provider support on SA8775P SoC
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH 0/8] Add GCE support for MT8196
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 9/9] iio: adc: ad7606: Add support for writing registers when using backend
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 8/9] iio: adc: ad7606: Simplify channel macros
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 7/9] iio: adc: ad7606: change r/w_register signature
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 6/9] iio: adc: adi-axi-adc: Add support for AD7606 register writing
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 5/9] iio: adc: adi-axi-adc: Add platform children support
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 4/9] iio: adc: ad7606: Move software functions into common file
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 3/9] iio:adc: ad7606: Move the software mode configuration
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 0/9] Add support for Software mode on AD7606's iio backend driver
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- [PATCH 1/9] iio: adc: ad7606: Fix hardcoded offset in the ADC channels
- From: Guillaume Stols <gstols@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- RE: [RFC v2 1/1] fpga-region: Add generic IOCTL interface for runtime FPGA programming
- From: "Manne, Nava kishore" <nava.kishore.manne@xxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add microchip USB5807 HUB
- From: Mike Looijmans <mike.looijmans@xxxxxxxx>
- RE: [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
- From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2 8/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
- From: fange zhang <quic_fangez@xxxxxxxxxxx>
- Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
- From: fange zhang <quic_fangez@xxxxxxxxxxx>
- Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
- From: fange zhang <quic_fangez@xxxxxxxxxxx>
- [PATCH v5 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- [PATCH v5 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- Re: [PATCH 0/8] Add GCE support for MT8196
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH v7 3/5] media: platform: mediatek: isp: add mediatek ISP3.0 sensor interface
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH v7 5/5] arm64: dts: mediatek: mt8365: Add support for camera
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH v7 2/5] dt-bindings: media: add mediatek ISP3.0 camsv
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH v7 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- [PATCH v7 0/5] Add Mediatek ISP3.0
- From: Julien Stephan <jstephan@xxxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/5] firmware_loader: add support to handle FW_UPLOAD_ERR_SKIP
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v3 0/7] Add Aspeed G7 FTGMAC100 support
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add microchip USB5807 HUB
- From: AKASH KUMAR <quic_akakum@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: net: can: atmel: Convert to json schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 8/8] iio: accel: kx022a: Support KX134-1211
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 7/8] dt-bindings: iio: kx022a: Support KX134-1211
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 6/8] iio: kx022a: Support ROHM KX134ACR-LBZ
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 5/8] dt-bindings: ROHM KX134ACR-LBZ
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 4/8] iio: accel: kx022a: Support ICs with different G-ranges
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 3/8] iio: accel: kx022a: Use cleanup.h helpers
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 2/8] iio: gts: Simplify using __free
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 1/8] iio: accel: kx022a: Improve reset delay
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 0/8] Support ROHM KX134ACR-LBZ
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH 0/5] Input: Add support for TouchNetix aXiom touchscreen
- From: Kamel BOUHARA <kamel.bouhara@xxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Kamel BOUHARA <kamel.bouhara@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: qcs615: enable pcie for qcs615
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- Re: [PATCH 2/5] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
- From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
- [PATCH v2] ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
- From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
- Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]