On Fri, Feb 21, 2025 at 05:53:43PM +0000, Conor Dooley wrote: > On Thu, Feb 20, 2025 at 01:04:18PM +0000, Biju Das wrote: > > Document support for the CAN-FD Interface on the RZ/G3E (R9A09G047) SoC, > > which supports up to six channels. > > > > The CAN-FD module on RZ/G3E is very similar to the one on both R-Car V4H > > and RZ/G2L, but differs in some hardware parameters: > > * No external clock, but instead has ram clock. > > * Support up to 6 channels. > > * 20 interrupts. > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > --- > > v1->v2: > > * No change. > > --- > > .../bindings/net/can/renesas,rcar-canfd.yaml | 67 +++++++++++++++++-- > > 1 file changed, 62 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml > > index f87f90f431e5..189d5303ad75 100644 > > --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml > > +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml > > @@ -42,6 +42,8 @@ properties: > > - renesas,r9a07g054-canfd # RZ/V2L > > - const: renesas,rzg2l-canfd # RZ/G2L family > > > > + - const: renesas,r9a09g047-canfd # RZ/G3E > > + > > reg: > > maxItems: 1 > > > > @@ -59,6 +61,19 @@ properties: > > - description: CAN1 error interrupt > > - description: CAN1 transmit interrupt > > - description: CAN1 transmit/receive FIFO receive completion interrupt > > + - description: CAN2 error interrupt > > + - description: CAN2 transmit interrupt > > + - description: CAN2 transmit/receive FIFO receive completion interrupt > > + - description: CAN3 error interrupt > > + - description: CAN3 transmit interrupt > > + - description: CAN3 transmit/receive FIFO receive completion interrupt > > + - description: CAN4 error interrupt > > + - description: CAN4 transmit interrupt > > + - description: CAN4 transmit/receive FIFO receive completion interrupt > > + - description: CAN5 error interrupt > > + - description: CAN5 transmit interrupt > > + - description: CAN5 transmit/receive FIFO receive completion interrupt > > + minItems: 8 > > > > interrupt-names: > > oneOf: > > @@ -74,15 +89,33 @@ properties: > > - const: ch1_err > > - const: ch1_rec > > - const: ch1_trx > > + - const: ch2_err > > + - const: ch2_rec > > + - const: ch2_trx > > + - const: ch3_err > > + - const: ch3_rec > > + - const: ch3_trx > > + - const: ch4_err > > + - const: ch4_rec > > + - const: ch4_trx > > + - const: ch5_err > > + - const: ch5_rec > > + - const: ch5_trx > > + minItems: 8 > > > > clocks: > > maxItems: 3 > > > > clock-names: > > - items: > > - - const: fck > > - - const: canfd > > - - const: can_clk > > + oneOf: > > + - items: > > + - const: fck > > + - const: canfd > > + - const: can_clk > > + - items: > > + - const: fck > > + - const: ram_clk > > + - const: can_clk > > > > power-domains: > > maxItems: 1 > > @@ -173,7 +206,9 @@ allOf: > > properties: > > compatible: > > contains: > > - const: renesas,rzg2l-canfd > > + enum: > > + - renesas,r9a09g047-canfd > > + - renesas,rzg2l-canfd > > then: > > properties: > > resets: > > @@ -187,6 +222,19 @@ allOf: > > required: > > - reset-names > > > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: renesas,r9a09g047-canfd > > + then: > > + properties: > > + interrupts: > > + maxItems: 20 > > + > > + interrupt-names: > > + maxItems: 20 > > Should these be minItems instead of maxItems? The list has 20 elements > at the moment (right?) so you're not adding any restriction here. And the existing platforms need to have 'maxItems: 8'.
