On Tue, 18 Feb 2025 12:49:11 +0100, Quentin Schulz wrote: > We have three SoMs that can use Haikou as their carrierboard so it'd be > nice to have consistency across SoMs on what's enabled by default. To > that end, Tiger Haikou now has UART5 enabled and Puma Haikou now has the > EEPROM found on Haikou specified. > > Additionally, some devices were configured or enabled in the wrong > places (either SoM DTSI when they needed to be configured in > carrierboard DTS or vice-versa). This moves things around to better > match actual HW definition and make it easier to reuse the SoM DTSI > without having to undo carrierboard-specific changes. While at it, > disable devices/buses exposed on connectors which do not have overlays. > They need to be enabled in the appropriate overlays whenever they will > be added. > > [...] Applied, thanks! [1/9] arm64: dts: rockchip: enable UART5 on RK3588 Tiger Haikou [2/9] arm64: dts: rockchip: move DDC bus from Haikou carrierboard to RK3399 Puma DTSI [3/9] arm64: dts: rockchip: move I2C6 from Haikou carrierboard to Puma DTSI [4/9] arm64: dts: rockchip: disable I2C6 on Puma DTSI [5/9] arm64: dts: rockchip: enable I2S0 in Haikou carrierboard, not Puma DTSI [6/9] arm64: dts: rockchip: add EEPROM found on RK3399 Puma Haikou [7/9] arm64: dts: rockchip: enable Ethernet in Haikou carrierboard, not Puma DTSI [8/9] arm64: dts: rockchip: enable I2C3 in Haikou carrierboard, not Ringneck DTSI [9/9] arm64: dts: rockchip: disable I2C2 bus by default on RK3588 Tiger Best regards, -- Heiko Stuebner <heiko@xxxxxxxxx>
