On Fri, Feb 21, 2025 at 6:19 PM Thomas Bogendoerfer
<tsbogend@xxxxxxxxxxxxxxxx> wrote:
>
> On Mon, Jan 20, 2025 at 10:21:46AM +0100, Sergio Paracuellos wrote:
> > Current MT7628A device tree file system controller node is wrong since it is
> > not matching bindings. Hence, update it to match current bindings updating
> > it also to use new introduced clock constants.
> >
> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> > ---
> > arch/mips/boot/dts/ralink/mt7628a.dtsi | 38 ++++++++++++++++----------
> > 1 file changed, 24 insertions(+), 14 deletions(-)
> >
> > diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> > index 45a15e005cc4..309966049c56 100644
> > --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
> > +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> > @@ -1,4 +1,5 @@
> > // SPDX-License-Identifier: GPL-2.0
> > +#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
> >
> > / {
> > #address-cells = <1>;
> > @@ -16,11 +17,6 @@ cpu@0 {
> > };
> > };
> >
> > - resetc: reset-controller {
> > - compatible = "ralink,rt2880-reset";
> > - #reset-cells = <1>;
> > - };
> > -
> > cpuintc: interrupt-controller {
> > #address-cells = <0>;
> > #interrupt-cells = <1>;
> > @@ -36,9 +32,11 @@ palmbus@10000000 {
> > #address-cells = <1>;
> > #size-cells = <1>;
> >
> > - sysc: system-controller@0 {
> > - compatible = "ralink,mt7620a-sysc", "syscon";
> > + sysc: syscon@0 {
> > + compatible = "ralink,mt7628-sysc", "syscon";
> > reg = <0x0 0x60>;
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > };
> >
> > pinmux: pinmux@60 {
> > @@ -138,7 +136,7 @@ watchdog: watchdog@100 {
> > compatible = "mediatek,mt7621-wdt";
> > reg = <0x100 0x30>;
> >
> > - resets = <&resetc 8>;
> > + resets = <&sysc 8>;
> > reset-names = "wdt";
> >
> > interrupt-parent = <&intc>;
> > @@ -154,7 +152,7 @@ intc: interrupt-controller@200 {
> > interrupt-controller;
> > #interrupt-cells = <1>;
> >
> > - resets = <&resetc 9>;
> > + resets = <&sysc 9>;
> > reset-names = "intc";
> >
> > interrupt-parent = <&cpuintc>;
> > @@ -190,7 +188,9 @@ spi: spi@b00 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinmux_spi_spi>;
> >
> > - resets = <&resetc 18>;
> > + clocks = <&sysc MT76X8_CLK_SPI1>;
> > +
> > + resets = <&sysc 18>;
> > reset-names = "spi";
> >
> > #address-cells = <1>;
> > @@ -206,7 +206,9 @@ i2c: i2c@900 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinmux_i2c_i2c>;
> >
> > - resets = <&resetc 16>;
> > + clocks = <&sysc MT76X8_CLK_I2C>;
> > +
> > + resets = <&sysc 16>;
> > reset-names = "i2c";
> >
> > #address-cells = <1>;
> > @@ -222,7 +224,9 @@ uart0: uartlite@c00 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinmux_uart0_uart>;
> >
> > - resets = <&resetc 12>;
> > + clocks = <&sysc MT76X8_CLK_UART0>;
> > +
> > + resets = <&sysc 12>;
> > reset-names = "uart0";
> >
> > interrupt-parent = <&intc>;
> > @@ -238,7 +242,9 @@ uart1: uart1@d00 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinmux_uart1_uart>;
> >
> > - resets = <&resetc 19>;
> > + clocks = <&sysc MT76X8_CLK_UART1>;
> > +
> > + resets = <&sysc 19>;
> > reset-names = "uart1";
> >
> > interrupt-parent = <&intc>;
> > @@ -254,7 +260,9 @@ uart2: uart2@e00 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinmux_uart2_uart>;
> >
> > - resets = <&resetc 20>;
> > + clocks = <&sysc MT76X8_CLK_UART2>;
> > +
> > + resets = <&sysc 20>;
> > reset-names = "uart2";
> >
> > interrupt-parent = <&intc>;
> > @@ -290,6 +298,8 @@ wmac: wmac@10300000 {
> > compatible = "mediatek,mt7628-wmac";
> > reg = <0x10300000 0x100000>;
> >
> > + clocks = <&sysc MT76X8_CLK_WMAC>;
> > +
> > interrupt-parent = <&cpuintc>;
> > interrupts = <6>;
> >
> > --
> > 2.25.1
>
> I get
>
> DTC arch/mips/boot/dts/ralink/vocore2.dtb
> /local/tbogendoerfer/korg/linux/arch/mips/boot/dts/ralink/mt7628a.dtsi:275.28-284.4: ERROR (phandle_references): /usb-phy@10120000: Reference to non-existent node or label "resetc"
>
> /local/tbogendoerfer/korg/linux/arch/mips/boot/dts/ralink/mt7628a.dtsi:275.28-284.4: ERROR (phandle_references): /usb-phy@10120000: Reference to non-existent node or label "resetc"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
>
> for CONFIG_DTB_VOCORE2=y and a similair failure for CONFIG_DTB_OMEGA2P=y
>
> I'll apply rest of the series, please send a fixed patch for mt7628a
Sure, thanks a lot!
Best regards,
Sergio Paracuellos
>
> Thomas.
>
> --
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea. [ RFC1925, 2.3 ]
