On Sun, Jan 19, 2025 at 07:34:15PM +0100, Sander Vanheule wrote: > This patch series intends to clean up the base includes, shared between > hardware devicetrees. To get rid of some dtbs_check warnings, some cpu > clock prorerties are also modified. > > To indicate why the split-up is required, the series concludes with > adding some CPU peripherals to rtl838x.dtsi, which are then used to add > a gpio-restart for the Cisco SG220-26P. > > Sander Vanheule (9): > mips: dts: realtek: Decouple RTL930x base DTSI > mips: dts: realtek: Clean up CPU clocks > mips: dts: realtek: Add address to SoC node name > mips: dts: realtek: Fold rtl83xx into rtl838x > mips: dts: realtek: Add SoC IRQ node for RTL838x > mips: dts: realtek: Correct uart interrupt-parent > mips: dts: realtek: Replace uart clock property > mips: dts: realtek: Add RTL838x SoC peripherals > mips: dts: realtek: Add restart to Cisco SG220-26P > > arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 10 +- > arch/mips/boot/dts/realtek/rtl838x.dtsi | 111 +++++++++++++- > arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 -------- > arch/mips/boot/dts/realtek/rtl930x.dtsi | 136 +++++++++++------- > 4 files changed, 202 insertions(+), 114 deletions(-) > delete mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi series applied to mips-next Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
