On Fri, Feb 21, 2025 at 10:52:18AM +0400, George Moussalem wrote:
> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
>
> IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt.
> The soc does not have a RPM, hence tsens has to be reset and
> enabled in the driver init. Adding the driver support for same.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
> ---
> [v4] Added Dmitry's Reviewed-by tag
> Fixed modpost warning: added __init to init_common
>
> drivers/thermal/qcom/tsens-v1.c | 60 +++++++++++++++++++++++++++++++++
> drivers/thermal/qcom/tsens.c | 3 ++
> drivers/thermal/qcom/tsens.h | 2 +-
> 3 files changed, 64 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index 1a7874676f68..1f955acbc2cf 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = {
> .trip_max_temp = 120000,
> };
>
> +static struct tsens_features tsens_v1_ipq5018_feat = {
> + .ver_major = VER_1_X,
> + .crit_int = 0,
> + .combo_int = 0,
> + .adc = 1,
> + .srot_split = 1,
> + .max_sensors = 11,
> + .trip_min_temp = -40000,
> + .trip_max_temp = 120000,
> + .ignore_enable = 1,
> +};
> +
> static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
> /* ----- SROT ------ */
> /* VERSION */
> @@ -150,6 +162,41 @@ static int __init init_8956(struct tsens_priv *priv) {
> return init_common(priv);
> }
>
> +static int __init init_ipq5018(struct tsens_priv *priv)
> +{
> + int ret;
> + u32 mask;
> +
> + ret = init_common(priv);
> + if (ret < 0) {
> + dev_err(priv->dev, "Init common failed %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 1);
> + if (ret) {
> + dev_err(priv->dev, "Reset failed\n");
> + return ret;
> + }
> +
> + mask = GENMASK(priv->num_sensors, 0);
> + ret = regmap_field_update_bits(priv->rf[SENSOR_EN], mask, mask);
> + if (ret) {
> + dev_err(priv->dev, "Sensor Enable failed\n");
> + return ret;
> + }
> +
> + ret = regmap_field_write(priv->rf[TSENS_EN], 1);
> + if (ret) {
> + dev_err(priv->dev, "Enable failed\n");
> + return ret;
> + }
> +
> + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 0);
> +
> + return ret;
> +}
> +
> static const struct tsens_ops ops_generic_v1 = {
> .init = init_common,
> .calibrate = calibrate_v1,
> @@ -194,3 +241,16 @@ struct tsens_plat_data data_8976 = {
> .feat = &tsens_v1_feat,
> .fields = tsens_v1_regfields,
> };
> +
> +const struct tsens_ops ops_ipq5018 = {
> + .init = init_ipq5018,
> + .calibrate = tsens_calibrate_common,
> + .get_temp = get_temp_tsens_valid,
> +};
> +
> +struct tsens_plat_data data_ipq5018 = {
> + .num_sensors = 5,
Commit message suggests that this should be '4'.
> + .ops = &ops_ipq5018,
> + .feat = &tsens_v1_ipq5018_feat,
> + .fields = tsens_v1_regfields,
> +};
--
With best wishes
Dmitry
