U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH v2] ARM: i.MX7: add AIPS base address defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts: mxsimage: Fix build with OpenSSL < 1.1.x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: i.MX6SL: import clock infrastructure from linux
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 5/5] ARM i.MX6SL: Add support for the Tolino Vision, Vision2 and Vision3HD
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 1/5] ARM i.MX: move cpu_type macros in front of cpu_revision code
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 4/5] ARM i.MX: Add i.MX6SL support
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 2/5] ARM i.MX: add SoC type detection for i.MX6SL
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH v2] spi: i.MX: Add driver for DSPI
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: pass full speed devices to companion controller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: add support for s25fl208k
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX7: add AIPS base address defines
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH] ARM: i.MX7: add AIPS base address defines
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH v2] spi: i.MX: Add driver for DSPI
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] spi: i.MX: Add driver for DSPI
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: How to renew eth0 settings without doing a reset
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: new driver to support the internal sata controller on Armada-XP
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: Accessing non-volatile variables from Linux
  • From: Frank Hunleth <fhunleth@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: ehci: pass full speed devices to companion controller
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] mtd: spi-nor: add support for s25fl208k
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] ata: new driver to support the internal sata controller on Armada-XP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• Re: How to configure Imx6ul watchdog from barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Accessing non-volatile variables from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX7: add AIPS base address defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX7: Kconfig: ARCH_IMX7 selects COMMON_CLK_OF_PROVIDER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Accessing non-volatile variables from Linux
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• How to configure Imx6ul watchdog from barebox
  • From: Haris Papadopoulos <haris@xxxxxxxxxxxx>
• Accessing non-volatile variables from Linux
  • From: Frank Hunleth <fhunleth@xxxxxxxxxxxxxxxxxxxx>
• Re: How to renew eth0 settings without doing a reset
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• How to renew eth0 settings without doing a reset
  • From: Haris Papadopoulos <haris@xxxxxxxxxxxx>
• [PATCH] ARM: i.MX7: add AIPS base address defines
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] ARM: i.MX7: Kconfig: ARCH_IMX7 selects COMMON_CLK_OF_PROVIDER
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH v2] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH 0/5] EFI fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: tftp get and last ack hanlding
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: i.MX: Add driver for DSPI
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] efi: don't unload drivers
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 3/5] output: use '[0m' to reset colors
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 4/5] efi: include and execute exit calls
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 0/5] EFI fixes
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 1/5] readkey: keys are unsigned char
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 2/5] serial: efi: improve input handling
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• Re: tftp get and last ack hanlding
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• tftp get and last ack hanlding
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] spi: i.MX: Add driver for DSPI
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: i.MX: add soc_reset operation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: i.MX: add soc_reset operation
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: i.MX: add soc_reset operation
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 1/5] ARM: i.MX: Add i.MX7 base architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] pinmmux: i.MX: add pin mux support for i.MX7
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [patch v2] i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap: OMAP_SERIALBOOT needs console support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] video: tc358767: add copyright lines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: vf610-twr: remove unused variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: i.MX7: initialize architected timer
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] regulator: Add pfuze driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: i.MX: Add WaRP7 board support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] watchdog: i.MX: Fix internal/external reset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] watchdog: i.MX: add soc_reset operation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: ide-sff: don't call free for ide_port in error path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] arm: omap: OMAP_SERIALBOOT needs console support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] video: tc358767: add copyright lines
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM i.MX31 iomux: add and sort GPIO MUX options
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] defaultenv: select COMMAND_SUPPORT and GLOBALVAR
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] lib: libfile: Fix copying files to a non existing destination
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] of: provide for_each_matching_node_from
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH] ARM i.MX31 iomux: add and sort GPIO MUX options
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: i.MX7 support
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: i.MX7 support
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: i.MX7 support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 18/23] clk: i.MX: Add clock support for i.MX7
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 23/23] ARM: i.MX: Add WaRP7 board support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 21/23] pinmmux: i.MX: add pin mux support for i.MX7
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/23] usb: imx: Add usbmisc support for i.MX7
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/23] mci: Allow to partition eMMC boot partitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/23] ARM: i.MX: Add i.MX7 base architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/23] serial: i.MX: Enable clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/23] usb: imx: Make usb-misc multi instance safe
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 22/23] serial: i.MX: add i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/23] imx-usb-loader: let constant data be const
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/23] mci: imx-esdhci: remove wrong write protection test
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/23] ARM: Makefile: format fix
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/23] usb: imx: Add clock support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 16/23] clk: i.MX: pllv3: Add support for the i.MX7 enet pll
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 19/23] clk: i.MX7: Add missing USB clocks
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/23] of: partitions: force "partitions" subnode
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/23] phy: usb-nop-xceiv: Add clock support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/23] mci: imx-esdhc: Enable clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 17/23] clk: imx: Add clk-cpu support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/23] imx-usb-loader: add i.MX7S support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/23] i2c: i.MX: Enable clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] defaultenv: select COMMAND_SUPPORT and GLOBALVAR
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] usb: gadget: disable AT91 driver on SAMA5D4
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] barebox-imd: add dependency on generated/compile.h also for PBL version
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Secure trusted boot mechanism
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Secure trusted boot mechanism
  • From: "Dold, Wolfram" <Wolfram.Dold@xxxxxxxxxxxx>
• [PATCH v2] lib: libfile: Fix copying files to a non existing destination
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: Secure trusted boot mechanism
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Secure trusted boot mechanism
  • From: "Dold, Wolfram" <Wolfram.Dold@xxxxxxxxxxxx>
• [PATCH v2 1/2] of: provide for_each_matching_node_from
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] of: provice for_each_matching_node_from
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] bus: mvebu-mbus: fixup correct device tree
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: libfile: Fix copying files to a non existing destination
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] bootm: fix magicvar name for global_bootm_verbose
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: "s.hauer@xxxxxxxxxxxxxx" <s.hauer@xxxxxxxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH] of_path: only handle no driver for device if it is on a bus
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] lib: libfile: Fix copying files to a non existing destination
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH] bootm: fix magicvar name for global_bootm_verbose
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• Re: [PATCH] of_path: only handle no driver for device if it is on a bus
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] bootchooser: fix help message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/omap4_usbboot: use libusb
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 0/7] net/phy: marvell: add support for 88e1510
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] bootchooser: fix help message
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• [PATCH] of_path: only handle no driver for device if it is on a bus
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/20] Vybrid related patches
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: scripts/checkpatch.pl is deprecated
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• scripts/checkpatch.pl is deprecated
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH] scripts/omap4_usbboot: use libusb
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 2/7] net/phy: marvell: 88E1540 LED registers already exist on 88E1121
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: pata-imx: simplify assignment of device name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 3/7] net/phy: marvell: rename phy_driver array to match Linux driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 1/7] net/phy: marvell: rename 88E1545 to 88E1540
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 6/7] net/phy: marvell: improve config_aneg for 88E1121R and 88E1318S
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 7/7] net/phy: marvell: add support for 88e1510 to marvell phy driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 4/7] net/phy: marvell: change spacing to be more similar to the Linux driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 0/7] net/phy: marvell: add support for 88e1510
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 5/7] net/phy: marvell: align definition of MII_88E1121_PHY_MSCR to Linux driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH v3 08/20] i.MX: Add fusemap for VF610
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 20/20] i.MX: vf610-twr: Remove MSCM setup code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 19/20] i.MX: imx-usb-misc: Add Vybrid support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 16/20] i.MX: iomux-vf610: Add missing pad definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 17/20] i.MX: imx-usb-phy: Add VF610 OF compatiblity string
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 15/20] i.MX: vf610: Add low-level pin configuration helper
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 14/20] i.MX: iomuxv3: Use helper functions in iomux-v3.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 13/20] i.MX6: sabresd: Remove magic numbers in setup_uart
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 18/20] i.MX: Default CONFIG_USB_IMX_PHY to 'y' on Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 12/20] i.MX: iomuxv3: Add low-level pad configuration routine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 09/20] i.MX: vf610: Ramp CPU clock to maximum frequency
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 11/20] i.MX: iomuxv3: Add helper macros to deconstruct iomux_v3_cfg_t values
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 07/20] i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 10/20] i.MX: iomuxv3: Add low-level pad code to headers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 01/20] i.MX: esdhc: Enable host->clk during initialization
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 06/20] i.MX: ocotp: Add imx_ocotp_sense_enable()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 05/20] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 02/20] i.MX: ocotp: Move memory reversing into a subroutine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 03/20] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 04/20] i.MX: ocotp: Initialize OCOTP as early as possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 00/20] Vybrid related patches
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• v2017.01.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: drop redundant debug_ll_outhexw macro defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] lib: add generic find_bit implementation from Linux and use in ARMv8
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] MIPS: drop redundant debug_ll_outhexw macro defines
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] arm: decalare div0 as weak function
  • From: Du Huanpeng <opentkernel@xxxxxxx>
• Re: [PATCH 1/2] arm: am33xx: add reset duration control register address definition
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts: mxsimage: Fix build with OpenSSL 1.1.x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: No release for December
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mci: imx: Add imx6sx compatible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] da9053: add dt_ids to be probed by devicetree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] da9053: reset FAULTLOG after read
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX53 Vincell: change dialog compatible to proper vendor prefix
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mvebu: enable MMU in defconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ata/ahci: simplify ahci_read_id
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Fix a bug in stack's "top" initialization
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: ide-sff: don't call free for ide_port in error path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] fs: squashfs: don't reference UBI symbols if UBI isn't compiled in
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: pata-imx: simplify assignment of device name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: pata-imx: simplify assignment of device name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: hub: increase delay after device removal
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: No release for December
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND] gpio: gpio-74164: Add 74lvc594 ID
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: dtsi: remove fpgamgr+sysmgr entry
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: remove unused entry from Makefile
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: decalare div0 as weak function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] arm: decalare div0 as weak function
  • From: DU HUANPENG <opentkernel@xxxxxxx>
• [PATCH] ARM: socfpga: remove unused entry from Makefile
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH] ARM: socfpga: dtsi: remove fpgamgr+sysmgr entry
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: No release for December
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• No release for December
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mci: omap: Add devicetree options parsing by MCI core.
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• [PATCH RESEND] gpio: gpio-74164: Add 74lvc594 ID
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• [PATCH] USB: host: hub: increase delay after device removal
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] ata: pata-imx: simplify assignment of device name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ata: pata-imx: simplify assignment of device name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Christian Hemp <c.hemp@xxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Christian Hemp <c.hemp@xxxxxxxxx>
• [PATCH 2/9] arm64: disable PBL support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 6/9] devparam: add static inline dummy for dev_add_param_bitmask
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/9] net: e1000: don't try to register eeprom if MTD support is missing
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 8/9] lib: add generic find_bit implementation from Linux and use in ARMv8
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/9] fs: squashfs: don't reference UBI symbols if UBI isn't compiled in
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 7/9] arm: pbl: rename linker script for uncompressed image data
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 9/9] arm: ARM64 doesn't provide the armlinux_* functions
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 5/9] nvvar: add static inline dummy for nvvar_save
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/9] globalvar: select FNMATCH
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] fixup! ata/ahci: simplify ahci_read_id
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ata: ide-sff: don't call free for ide_port in error path
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM: Fix a bug in stack's "top" initialization
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ata/ahci: simplify ahci_read_id
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM: mvebu: enable MMU in defconfig
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] gpio: gpio-74164: Add 74lvc594 ID
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• [PATCH] ARM: i.MX53 Vincell: change dialog compatible to proper vendor prefix
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH] da9053: add dt_ids to be probed by devicetree
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH] da9053: reset FAULTLOG after read
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb
  • From: Jan Remmet <J.Remmet@xxxxxxxxx>
• [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• [PATCH] i.MX habv4: add RVT address for i.MX6UL
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• [PATCH 2/2] imx-bbu-nand-fcb: add support for imx6ul
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• Re: [RFC v3 2/2] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [RFC v3 2/2] Add initial RISC-V architecture support
  • From: Andrey Korolyov <andrey@xxxxxxx>
• [PATCH 2/2] ARCH: ARM: Add support for phytec-phycore-imx6ul
  • From: Christian Hemp <c.hemp@xxxxxxxxx>
• [PATCH 1/2] mci: imx: Add imx6sx compatible
  • From: Christian Hemp <c.hemp@xxxxxxxxx>
• Re: [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH v2 21/21] i.MX: vf610-twr: Remove MSCM setup code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 20/21] i.MX: imx-usb-misc: Add Vybrid support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 17/21] i.MX: iomux-vf610: Add missing pad definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 18/21] i.MX: imx-usb-phy: Add VF610 OF compatiblity string
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 16/21] i.MX: vf610: Add low-level pin configuration helper
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 15/21] i.MX: iomuxv3: Use helper functions in iomux-v3.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 14/21] i.MX6: sabresd: Remove magic numbers in setup_uart
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 13/21] i.MX: iomuxv3: Add low-level pad configuration routine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 10/21] i.MX: vf610: Ramp CPU clock to maximum frequency
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 11/21] i.MX: iomuxv3: Add low-level pad code to headers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 09/21] i.MX: Add fusemap for VF610
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 06/21] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/21] i.MX: ocotp: Initialize OCOTP as early as possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 08/21] i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 07/21] i.MX: ocotp: Add imx_ocotp_sense_enable()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 01/21] i.MX: esdhc: Enable host->clk during initialization
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 02/21] i.MX: ocotp: Move memory reversing into a subroutine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 00/21] Vybrid related patches
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: mvebu: add LSB support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: mvebu: use wait_on_timeout instead of a loop with udelay.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] spi: mvebu: only read from bus when data is needed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i.MX: IPUv3: Add parallel display support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ubifs: restore symlink support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC v3 1/2] serial: add driver for SiFive UART
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v3 0/2] add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v3 2/2] Add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/2] arm: baltos: prolong global reset
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH 1/2] arm: am33xx: add reset duration control register address definition
  • From: yegorslists@xxxxxxxxxxxxxx
• am335x: assert sysreset (NRESET_INOUT)
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: AM335x Porting Questions
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• RE: AM335x Porting Questions
  • From: "Jonathan Stackhouse" <jon@xxxxxxxxx>
• [PATCH 3/3] PWM: update enable status when using the internal API
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• [PATCH 1/3] i.MX: IPUv3: Add parallel display support
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• [PATCH 2/3] video: IPU framebuffer: honor clock and enable polarities
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• [PATCH] ubifs: restore symlink support
  • From: Renaud Barbier <renaud.barbier@xxxxxx>
• Re: AM335x Porting Questions
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 1/2] spi: mvebu: add LSB support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] spi: mvebu: improve error reporting
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] spi: mvebu: use wait_on_timeout instead of a loop with udelay.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] of: base: add chosen node if it does not exist when adding initrd
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: mvebu: only read from bus when data is needed
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] spi: mvebu: only read from bus when data is needed
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 2/3] spi: mvebu: make sure the value calculated for PSCL is also used
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] spi: mvebu: various non-critical improvements to armada_370_xp_spi_set_baudrate
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC v2 6/8] bootm: add kexec ELF support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [RFC v2 4/8] import initial kexec stuff
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• AM335x Porting Questions
  • From: "Jonathan Stackhouse" <jon@xxxxxxxxx>
• Re: [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: UBIFS trouble
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: phycore-imx6: refactor fec nodes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] ubi: remove character device flag from static volumes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] fixup! gpio: Add GPIO driver for Vybrid
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: m25p80: add support for Everspin MR25H40
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] imx6qdl-phytec-phycore-som.dtsi: rename eeprom
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] x86: update boot message "UBOOT2" to "BAREBOX"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: qemu-malta_defconfig: set MAX_IMAGE_SIZE = 4 MiB
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC v2 6/8] bootm: add kexec ELF support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC v2 4/8] import initial kexec stuff
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] spi: mvebu: fix error handling for transfer problems
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: mvebu: fix baudrate selection for Armada 370/XP
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] spi: mvebu: fix baudrate selection for Armada 370/XP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH 16/16] i.MX: imx-usb-misc: Add Vybrid support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 14/16] i.MX: imx-usb-phy: Add VF610 OF compatiblity string
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 12/16] i.MX: vf610: Add low-level pin configuration helper
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 15/16] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/16] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 10/16] i.MX6: sabresd: Remove magic numbers in setup_uart
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 13/16] i.MX: iomux-vf610: Add missing pad definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 03/16] i.MX: ocotp: Initialize OCOTP as early as possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/16] i.MX: iomuxv3: Add low-level pad configuration routine
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 11/16] i.MX: iomuxv3: Use helper functions in iomux-v3.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/16] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/16] i.MX: iomuxv3: Add low-level pad code to headers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/16] i.MX: ocotp: Initialize 'sense_enable' to true on Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/16] i.MX: esdhc: Enable host->clk during initialization
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 00/16] Vybrid related patches
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] bootm: dont use internal oftree fallback by default
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH] bootm: dont use internal oftree fallback by default
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] spi: mvebu: fix error handling for transfer problems
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [RFC v2 4/8] import initial kexec stuff
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 7/8] MIPS: add kexec ELF loading support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 3/8] resource: add create_resource() helper function
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 5/8] filetype: add ELF type
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 6/8] bootm: add kexec ELF support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 0/8] MIPS: use kexec to load ELF linux images
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 8/8] MIPS: malta: enable kexec
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 2/8] MIPS: c-r4k: add support for secondary cache
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC v2 1/8] MIPS: add virt_to_phys() and phys_to_virt()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] bootm: dont use internal oftree fallback by default
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] MIPS: qemu-malta_defconfig: set MAX_IMAGE_SIZE = 4 MiB
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Cadence QSPI xload boot timing issue
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• black screen with blinking cursor
  • From: irlinuxbox <irlinuxbox@xxxxxxxxx>
• Re: [PATCH] bootm: dont use internal oftree fallback by default
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: help-UBOOT2 JMP
  • From: irlinuxbox <irlinuxbox@xxxxxxxxx>
• [PATCH] bootm: dont use internal oftree fallback by default
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] x86: update boot message "UBOOT2" to "BAREBOX"
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: help-UBOOT2 JMP
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• help-UBOOT2 JMP
  • From: irlinuxbox <irlinuxbox@xxxxxxxxx>
• [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 1/3] arm: imx6: ocotp: Added support for the i.MX6UL
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 2/3] arm: imx6: ocotp: Added write check
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 2/3] ARM: rdu2: support QP variant
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: imx: Add support for ZII RDU2 board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: rdu2: bring board support in line with other boards
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] Documentation: remote-control: fix markup
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH 1/2] imx6qdl-phytec-phycore-som.dtsi: rename eeprom
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• Re: UBIFS trouble
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• UBIFS trouble
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 4/4] ARM i.MX: Add i.MX6SL support
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 3/4] ARM: i.MX6SL: import clock infrastructure from linux
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 1/4] ARM i.MX: move cpu_type macros in front of cpu_revision code
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 3/3] ARM: dts: phycore-imx6: remove unnecessary include
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH 2/3] ARM: dts: phycore-imx6: fix missing ?xc-skew-ps settings for ethphy
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: phycore-imx6: refactor fec nodes
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH 1/2] fixup! gpio: Add GPIO driver for Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] fixup! i.MX: Add VF610 clock tree initialization code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/6] ubi: barebox: Remove character device flag from static volumes
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 2/6] devfs: Add optional truncate callback for device files
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 0/6] ubi: remove character device flag from static volumes
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 3/6] ubi: Add truncate callback
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 5/6] commands: ubi: ubiupdatevol: Open device with O_TRUNC
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 1/6] libfile: copy_file: Only open regular files with O_TRUNC
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 4/6] fs: Remove O_TRUNC check for devices when open files
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH] mtd: m25p80: add support for Everspin MR25H40
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 03/10] nios2: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/10] nios2: Fix out of tree build
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ubi: Only read necessary size when reading the VID header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: bootchooser: fix typos
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] environment: fix typo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/10] of: Use %pa to print resource_size_t type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/10] menu: sanitize menu_add_title
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/10] arm: at91 bootstrap: Fix menu title
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/10] ARM: socfpga: fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/10] mtd: peb: fix usage of uninitialized variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/10] mtd: peb: Fix format specifier
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCHv2] ARM: i.MX25/35: Fix bootsource detection
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/10] globalvar: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/10] ARM: socfpga: fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] environment: fix typo
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH 3/3] lib/int_sqrt.c: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] input: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] globalvar: Make locally used function static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] Documentation: bootchooser: fix typos
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH] ubi: Only read necessary size when reading the VID header
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH] spi: i.MX: reset controller on init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCHv2] ARM: i.MX25/35: Fix bootsource detection
  • From: Daniel Krüger <daniel.krueger@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX25/35: Fix bootsource detection
  • From: Daniel Krüger <daniel.krueger@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX25/35: Fix bootsource detection
  • From: Daniel Krüger <daniel.krueger@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scripts: imx imx-usb-loader: sort USB id list
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] docs: fix typos in memcmp help text
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] scripts: imx imx-usb-loader: add i.MX6SL support
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH 1/2] scripts: imx imx-usb-loader: sort USB id list
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] docs: fix typos in memcmp help text
  • From: Moritz Warning <moritzwarning@xxxxxx>
• Re: [RFCv2 1/2] serial: add driver for SiFive UART
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: habv4 on imx6
  • From: Jan Remmet <J.Remmet@xxxxxxxxx>
• habv4 on imx6
  • From: Jan Remmet <J.Remmet@xxxxxxxxx>
• Re: [RFCv2 1/2] serial: add driver for SiFive UART
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Add src fixup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: gpio: fix handling of return code of of_get_gpio
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] scripts/kwbimage: fix handling of binary header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] fixup! pinctrl: Add provisions to control GPIO pin direction
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mux-pca954x: Add code to control reset line
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: i2c: Listen for CTRL-C when probing
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] regmap: Add regmap_write_bits() function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: gpio: fix handling of return code of of_get_gpio
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: gpio: use dynamic bus number unconditionally
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: algo-bit: remove prototype for non-existing function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] scripts/kwbimage: fix typo
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] scripts/kwbimage: use ALIGN_SUP instead of open-coding it
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] scripts/kwbimage: fix handling of binary header
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] scripts/kwbimage: allow to overwrite binary
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] scripts/kwbimage: fix handling of binary header
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] scripts/kwbimage: fix typo
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] scripts/kwbimage: use ALIGN_SUP instead of open-coding it
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] fixup! clk: Port of_clk_set_defaults()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] fixup! pinctrl: Add provisions to control GPIO pin direction
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] i2c-mux-pca954x: Add code to control reset line
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] commands: i2c: Listen for CTRL-C when probing
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: usb otg port not working on an imx25 soc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: Add src fixup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] state: Documentation updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/28] clk: Port of_clk_set_defaults()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Compiler issues
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] gpio: Port SX150x driver from Linux
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] regmap: Add regmap_write_bits() function
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: Compiler issues
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: add designware driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• usb otg port not working on an imx25 soc
  • From: iw3gtf@xxxxxxxx
• [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [RFCv2 2/2] add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFCv2 0/2] add initial RISC-V architecture support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFCv2 1/2] serial: add driver for SiFive UART
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Compiler issues
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• Re: v2016.11.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: v2016.11.0
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• v2016.11.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/28] Vybrid support in Barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] net/designware: A few patches from U-Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] net/designware: A few patches from U-Boot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH 0/4] net/designware: A few patches from U-Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 07/28] i.MX: Add pinctrl driver for VF610
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 10/28] i.MX: Move clk code from 'mach-imx' to 'drivers'
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 15/28] i.MX: Add VF610 clock tree initialization code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 28/28] gpio: Add GPIO driver for Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 24/28] i.MX: ocotp: Account for shadow memory gaps
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 23/28] i.MX: ocotp: Remove unused #define
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 26/28] i.MX: fec: Enable all clocks specified for FEC
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 25/28] i.MX: ocotp: Add Vybrid support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 19/28] i.MX: i2c: Add Vybrid support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 21/28] i.MX: esdhc: Request "per" clock explicitly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 18/28] i.MX: i2c: Use read/write adapter functions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 22/28] i.MX: Kconfig: Enable OCOTP on Vybrid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 20/28] i.MX: esdhc: Do not rely on CPU type for quirks
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 27/28] i.MX: fec: Add support for Vybrid variant
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 17/28] i.MX: Add 'lpuart' serial driver
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 16/28] vf610: Give enet_osc explicit "enet_ext" name
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 02/28] i.MX: Add register definitions for VF610 SoC
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 13/28] i.MX: clk: Port imx_check_clocks()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 12/28] i.MX: clk: Add IMX_PLLV3_USB_VF610 support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 14/28] i.MX: clk: Port imx_clk_mux_flags from Linux
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 08/28] clk: Port clock dependency resolution code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 11/28] i.MX: clk: Port imx_clk_gate2_cgr()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 04/28] i.MX: scripts: Add "vf610" soc to imx-image
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 03/28] i.MX: Add DEBUG_LL hooks for VF610
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 05/28] i.MX: Add support for VF610 Tower board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 09/28] clk: Port of_clk_set_defaults()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 00/28] Vybrid support in Barebox
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 01/28] i.MX: Add primitive functions for VF610 family
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 06/28] pinctrl: Add provisions to control GPIO pin direction
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: Designware MAC reset timeout after Linux reboot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: Fwd: boot kernel with append device tree
  • From: Alex Vazquez <avazquez.dev@xxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• [PATCH] clk: add clock command completion
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: i.MX6 esdctl: Add i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/7] ARM: i.MX6ul: Add clock support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/7] pinmux: imx-iomux-v3: Add i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: i.MX6 gpt: Add i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/7] serial: i.MX: Add i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: i.MX: ocotp: Add i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/7] ARM: i.MX: beginning i.MX6ul support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: OCOTP: Add functions to access fuses field wise
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] serial: i.MX uart: Allow DTE mode in lowlevel code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] of: partitions: Support new binding
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] of: of_find_path: Add support for new partition binding
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Designware MAC reset timeout after Linux reboot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: Designware MAC reset timeout after Linux reboot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] net: phy: micrel: Do not overwrite reserved bits
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Designware MAC reset timeout after Linux reboot
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: Designware MAC reset timeout after Linux reboot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: spi: fix chip select validation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] command.h: drop unused Struct_Section attribute
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: drop redundant start_barebox() declaration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Fwd: boot kernel with append device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• [PATCH 4/4] net/designware: add explicit reset of {tx|rx}_currdescnum
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 3/4] net: designware: Respect "bus mode" register contents on SW reset
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 2/4] net/designware: Do not select MIIPORT for RGMII interface
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 1/4] net/designware: Consecutive writes to the same register to be avoided
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH 0/4] net/designware: A few patches from U-Boot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Designware MAC reset timeout after Linux reboot
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] commands: spi: fix chip select validation
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• Re: Fwd: boot kernel with append device tree
  • From: Alex Vazquez <avazquez.dev@xxxxxxxxx>
• Re: Fwd: boot kernel with append device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] command.h: drop unused Struct_Section attribute
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: drop redundant start_barebox() declaration
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Fwd: boot kernel with append device tree
  • From: Alex Vazquez <avazquez.dev@xxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: add MX25U2033E
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts imx-image: add DCD NOP command support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: mc13892: more descriptive charger register defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Fwd: boot kernel with append device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• [PATCH] mfd: mc13892: more descriptive charger register defines
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configure RAM size on iMX53 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Configure RAM size on iMX53 board
  • From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
• [PATCH] scripts imx-image: add DCD NOP command support
  • From: Alexander Kurz <akurz@xxxxxxxx>
• [PATCH] mtd: spi-nor: add MX25U2033E
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH upstream 1/4] state: use packet attribute for on storage structs
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• Re: [PATCH upstream 1/4] state: use packet attribute for on storage structs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] fixup! watchdog: add designware driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] PCI: add some useful debug output
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: e1000: set edev parent pointer
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: riotboard: fix barebox partition size
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] net: e1000: fix i210 register remapping
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH upstream 1/4] state: use packet attribute for on storage structs
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2] net: e1000: fix i210 register remapping
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH upstream 1/4] state: use packet attribute for on storage structs
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH upstream 4/4] docs: state: make string variable type clearer
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH upstream 2/4] state: fix indentation
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH upstream 3/4] state: fix state is not saved when string variable is changed
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH 1/2] fixup! watchdog: add designware driver
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/2] fixup! ARM: socfpga: dtsi: add dw-wdt reset lines
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/5] PCI: align address range before scanning bridge
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 5/5] PCI: split PCI hierarchy enumeration and config from device registration
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/5] PCI: add some useful debug output
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/5] PCI: align BAR address to BAR size
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/5] PCI: only check specific flag for 64bit BAR
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] net: e1000: set edev parent pointer
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: riotboard: fix barebox partition size
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2] net: e1000: fix i210 register remapping
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] net: e1000: fix i210 register remapping
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: am33xx.dtsi: Add spi aliases
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Read kernel from static UBI volume
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Read kernel from static UBI volume
  • From: Guillermo Rodriguez Garcia <guille.rodriguez@xxxxxxxxx>
• Re: Read kernel from static UBI volume
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Read kernel from static UBI volume
  • From: Guillermo Rodriguez Garcia <guille.rodriguez@xxxxxxxxx>
• Re: Read kernel from static UBI volume
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Read kernel from static UBI volume
  • From: Guillermo Rodriguez Garcia <guille.rodriguez@xxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] mci: add MBR write and read function to block devices
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] partitions/dos: add function to write partition table
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] mci: add MBR write and read function to block devices
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] nand: imx6: Changed default NAND clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] nand: imx6: Changed default NAND clock
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand: nand_mxs: Fix readtotal calculation
  • From: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
• [PATCH v2] ARM: dts: am33xx.dtsi: Add spi aliases
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 2/6] fs: squashfs: port lz4 compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] fs: squashfs: port zlib compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/6] fs: squashfs: append linux rootarg for ubi volume
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/6] fs: squashfs: port lzo compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] Add filetype and detection for squashfs images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] squashfs additional decompressors
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] fs: squashfs: Enable squashfs XZ support when XZ is enabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am33xx: Make am33xx-strip.dtsi independent
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: Compressed DTB - builtin DTB
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] fs: squashfs: Do not default on xz
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am33xx: Make am33xx-strip.dtsi independent
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: am33xx.dtsi: Add spi aliases
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: [PATCH 6/6] fs: squashfs: Do not default on xz
  • From: Daniel Krüger <daniel.krueger@xxxxxxxxxxxxxxxxxxxxx>
• Re: Compressed DTB - builtin DTB
  • From: Daniel Krüger <daniel.krueger@xxxxxxxxxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• Re: Loading kernel issues
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• Re: Loading kernel issues
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• Re: Loading kernel issues
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: mvebu: fix a comment about mv78460
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand: nand_mxs: Fix readtotal calculation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] nand: imx6: Changed default NAND clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: Baltos: don't invoke baltos_read_eeprom in MLO
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] fs: squashfs: port zlib compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] fs: squashfs: port zlib compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] fs: squashfs: Do not default on xz
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/6] fs: squashfs: port lzo compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/6] fs: squashfs: port lz4 compression support from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] Add filetype and detection for squashfs images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/6] fs: squashfs: append linux rootarg for ubi volume
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] fs: squashfs: port zlib compression support from kernel
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH] pinctrl: mvebu: fix a comment about mv78460
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• [PATCH 2/2] mtd: nand: nand_mxs: Fix readtotal calculation
  • From: Christian Hemp <c.hemp@xxxxxxxxx>
• [PATCH 1/2] nand: imx6: Changed default NAND clock
  • From: Christian Hemp <c.hemp@xxxxxxxxx>
• [PATCH] arm: Baltos: don't invoke baltos_read_eeprom in MLO
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• Re: Loading kernel issues
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 1/3] state: pass error code instead of inventing new one
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] of_path: handle no driver for device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] state: driver: handle EPROBE_DEFER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• Re: Loading kernel issues
  • From: Javier Fileiv <javier.fileiv@xxxxxxxxx>
• Re: [PATCH v2] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mtd: ubi: enable thread earlier
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] sandbox: eliminate sdl_init()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: mvebu: make more than one device on a bus work
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: Baltos: setup MPU PLL to run at 600MHz
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] sandbox: eliminate sdl_init()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Loading kernel issues
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>