Re: Configure RAM size on iMX53 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Sascha, but something I do wrong

I tried set fixed size to 512M, but neither works.

With these changes does not work or 512MB board  or 1GB board.

=========<cut lowlevel.c>===============

#include <common.h>
#include <mach/imx53-regs.h>
#include <mach/esdctl.h>
#include <mach/generic.h>
#include <asm/barebox-arm-head.h>
#include <asm/barebox-arm.h>

void __naked barebox_arm_reset_vector(void)
{
    imx5_cpu_lowlevel_init();
    arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
//    imx53_barebox_entry(NULL);
    barebox_arm_entry(MX53_CSD0_BASE_ADDR,SZ_512M,NULL);
}
=========================================

==========<cut board.c>==================
#include <common.h>
#include <environment.h>
#include <fcntl.h>
#include <platform_data/eth-fec.h>
#include <fs.h>
#include <init.h>
#include <nand.h>
#include <net.h>
#include <partition.h>
#include <linux/sizes.h>
#include <gpio.h>
#include <mci.h>

#include <generated/mach-types.h>

#include <mach/imx53-regs.h>
#include <mach/iomux-mx53.h>
#include <mach/devices-imx53.h>
#include <mach/generic.h>
#include <mach/imx-nand.h>
#include <mach/iim.h>
#include <mach/imx5.h>
#include <mach/esdctl.h>

#include <asm/armlinux.h>
#include <io.h>
#include <asm/mmu.h>

........ other device init functions ......

static int myboard_init(void)
{
        imx_esdctl_disable();

        arm_add_mem_device("ram0", MX53_CSD0_BASE_ADDR, SZ_512M);

        return 0;
}
core_initcall(myboard_init);
========================================

Thanks in advanced.

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux