Hi Fabio, On Mon, Jan 16, 2017 at 08:58:01AM -0200, Fabio Estevam wrote: > Hi Sascha, > > On Mon, Jan 16, 2017 at 8:50 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > > > One issue remaining is that I am currently unable to reset the board > > using the watchdog or the barebox reset command. Out of ideas, will > > fix later. > > Nice work! > > Have you tried using MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B pin to reset the board? Yes, I did. I configured MX7D_PAD_GPIO1_IO00 as WDOD1_WDOG_B, still my board only hangs. I also tried configuring it as GPIO. When toggling the gpio the board only hangs. I also tried different variations of the watchdog SRS/WDA bits. I think there is some other piece I am missing. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
