[PATCH v3 15/20] i.MX: vf610: Add low-level pin configuration helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add low-level pin configuration helper for early boot code, and convert
pinctrl driver to use that code as well.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
 arch/arm/mach-imx/include/mach/iomux-vf610.h | 15 +++++++++++++++
 drivers/pinctrl/pinctrl-vf610.c              | 11 ++++++-----
 2 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-imx/include/mach/iomux-vf610.h b/arch/arm/mach-imx/include/mach/iomux-vf610.h
index 1535628..84a1eb5 100644
--- a/arch/arm/mach-imx/include/mach/iomux-vf610.h
+++ b/arch/arm/mach-imx/include/mach/iomux-vf610.h
@@ -223,4 +223,19 @@ enum {
 	VF610_PAD_DDR_ODT0__DDR_ODT_1	= IOMUX_PAD(0x02d8, 0x02d8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 };
 
+#define PINCTRL_VF610_MUX_SHIFT 20
+
+
+static inline void vf610_setup_pad(void __iomem *iomux, iomux_v3_cfg_t pad)
+{
+	iomux_v3_setup_pad(iomux, SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID,
+			   IOMUX_CTRL_OFS(pad),
+			   IOMUX_PAD_CTRL_OFS(pad),
+			   IOMUX_SEL_INPUT_OFS(pad),
+			   IOMUX_MODE(pad) << PINCTRL_VF610_MUX_SHIFT,
+			   IOMUX_PAD_CTRL(pad),
+			   IOMUX_SEL_INPUT(pad));
+}
+
+
 #endif	/* __IOMUX_VF610_H__ */
diff --git a/drivers/pinctrl/pinctrl-vf610.c b/drivers/pinctrl/pinctrl-vf610.c
index b479bf2..4234263 100644
--- a/drivers/pinctrl/pinctrl-vf610.c
+++ b/drivers/pinctrl/pinctrl-vf610.c
@@ -24,9 +24,10 @@
 #include <malloc.h>
 #include <gpio.h>
 
+#include <mach/iomux-vf610.h>
+
 enum {
 	PINCTRL_VF610_MUX_LINE_SIZE = 20,
-	PINCTRL_VF610_MUX_SHIFT = 20,
 
 	PINCTRL_VF610_IBE = 1 << 0,
 	PINCTRL_VF610_OBE = 1 << 1,
@@ -60,17 +61,17 @@ static int pinctrl_vf610_set_state(struct pinctrl_device *pdev,
 	npins = size / PINCTRL_VF610_MUX_LINE_SIZE;
 
 	for (i = 0; i < npins; i++) {
+		iomux_v3_cfg_t pad;
 		u32 mux_reg   = be32_to_cpu(*list++);
 		u32 input_reg = be32_to_cpu(*list++);
 		u32 mux_val   = be32_to_cpu(*list++);
 		u32 input_val = be32_to_cpu(*list++);
 		u32 conf_val  = be32_to_cpu(*list++);
 
-		writel(mux_val << PINCTRL_VF610_MUX_SHIFT | conf_val,
-		       iomux->base + mux_reg);
+		pad = IOMUX_PAD(mux_reg, mux_reg, mux_val,
+				input_reg, input_val, conf_val);
 
-		if (input_reg)
-			writel(input_val, iomux->base + input_reg);
+		vf610_setup_pad(iomux->base, pad);
 	}
 
 	return 0;
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux