From: Daniel Schultz <d.schultz@xxxxxxxxx>
The Barebox recognized false bad erase blocks while booting from a
Spansion NAND (1). This error occurred due a to high clock. The
Kernel sets the default NAND clock to 22Mhz. So, to fix this error and
to be more identical with the Kernel, the Barebox should be too.
1: nand: NAND device: Manufacturer ID: 0x01, Chip ID: 0xd3 (AMD/Spansion
S34ML08G2), 1024MiB, page size: 2048, OOB size: 128
Signed-off-by: Daniel Schultz <d.schultz@xxxxxxxxx>
Tested-by: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
Signed-off-by: Christian Hemp <c.hemp@xxxxxxxxx>
---
drivers/mtd/nand/nand_mxs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/nand_mxs.c b/drivers/mtd/nand/nand_mxs.c
index 01aa063..fe955e8 100644
--- a/drivers/mtd/nand/nand_mxs.c
+++ b/drivers/mtd/nand/nand_mxs.c
@@ -2145,7 +2145,7 @@ static int mxs_nand_probe(struct device_d *dev)
if (mxs_nand_is_imx6(nand_info)) {
clk_disable(nand_info->clk);
- clk_set_rate(nand_info->clk, 96000000);
+ clk_set_rate(nand_info->clk, 22000000);
clk_enable(nand_info->clk);
nand_info->dma_channel_base = 0;
} else {
--
1.9.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
