On Wed, Nov 09, 2016 at 05:23:10AM +0100, Jose Luis Zabalza wrote: > There is no form of detection. UBoot (a very old version) don't use > any CS1 address, except with the memtest command. > If memtest command is executed with 512MB version, UBoot hangs, as expected. > I set the mem kernel parameter using a environment variable and kernel > can reach CS1 memory. Then you could drop the CS1 setup from the DCD table and do the same. You can then create a command or similar which initializes the CS1 memory and registers the new memory bank. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox