On Tue, Jan 17, 2017 at 10:07:14AM -0200, Fabio Estevam wrote: > Hi Sascha, > > On Mon, Jan 16, 2017 at 10:58 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > > > Yes, I did. I configured MX7D_PAD_GPIO1_IO00 as WDOD1_WDOG_B, still my > > board only hangs. I also tried configuring it as GPIO. When toggling the > > gpio the board only hangs. I also tried different variations of the > > watchdog SRS/WDA bits. I think there is some other piece I am missing. > > What is the version of your warp7 board: rev1.0 or rev2.0? The version > number is written on the CPU board. > > warp rev1.0 did not connect the WDOD1_WDOG_B pin to the PMIC and is > not capable of resetting the system. > > warp7 rev2.0 does connect the WDOD1_WDOG_B pin to the PMIC and the > reset works fine. I have a rev 2.0 board here. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
